E-mobility Reinvented
10 - 11 May 2017 | Berlin, Germany

Academic Posters

Poster exhibits are an important aspect of the Electric Vehicles Europe conference and exhibition. Posters will be featured in the exhibition, where approximately 3,000 visitors are expected.

  Publicity
Best poster will be rewarded with Best Poster Award followed by an article in Electric Vehicles Research Journal

Confirmed posters


Czech Republic
R&D Center for Low-Cost Plasma and Nanotechnology Surface Modifications, Masaryk University
Tomáš Homola
Low-temperature (70 °C) processing of inkjet printed TiO2 photoanodes using ambient air plasma
Germany
Heinz-Nixdorf Chair for Medical Electronics, Technical University of Munich
Nada Mzoughi, Margarete Remm, Helmut Grothe, Bernhard Wolf
Printed flexible and disposable chips with SWCNT sensors for multiparametric measurements in the biomedical field.
Saudi Arabia
Computer Engineering Department, King Fahd University of Petroleum and Minerals
M. W. Raad
An RFID based Telehealth System for Localizing Elderly with Alzheimer's
Germany
Universität Heidelberg, Institute for Applied Physical Chemistry
Marcel Rother, Maximilian Brohmann, Shuyi Yang, Stefan B. Grimm, Stefan P. Schieβl, Arko Graf, and Jana Zaumseil
Aerosol-Jet Printing of polymer-wrapped (6,5) Carbon Nanotubes for Field-effect Transistors
Belgium
Institute for Materials Research (IMO), Hasselt University
Jeroen Stryckers, Viktorija Mecnika, Glen Vandevenne, Inge Verboven, Wim Deferme
Printing smart designs of electroluminescent devices with enhanced textile properties
Saudi Arabia
Computer Engineering Department, King Fahd University of Petroleum
Dr Muhammad Wasim Raad & Ahmed abu absa
Antenna Based Sensing for Clean Energy
Taiwan
Taiwan Textile Research Institute (TTRI)
Chien-Lung Shen, Tzu-Hao Huang, Po-Chun Hsu, Ya-Chi Ko, Fen-Ling Chen, and Wei-Chung Wang
A novel design of the physiological monitoring e-textile
Belgium
Institute for Materials Research (IMO), Hasselt University
Idranil Basak, Steven Nagles, Glen Vandevenne, Wouter Marchal, An Hardy, Marlies K. Van Bael, Wim Deferme
Inkjet printing of flexible, strechable and transparent resistance based sensor using innovative and low-curing inkjet inks
Singapore
Nanyang Technological University
Jingwei CHEN, Shaohui LI, Pooi See LEE
Mn-doped Nickel sulfides/Graphene oxide composites as superior anode materials for sodium ion batteries
Taiwan
Industrial Technology Research Institute(ITRI)
K.J. Wang, Y.M. Wang, Y.W. Lin, S.Y. Lin, L.Y. Chen, L.Z. LIANG
Additive Manufacturing Technology for The Flexible Printed Circuit Board
Belgium
1 Institute for Materials Research (IMO), Hasselt University
2 Flanders Make vzw
Steven Nagels1,2, Wim Deferme1,2
2.5D direct laser engraving of silicone microfluidic channels for stretchable electronics
South Korea
Hanbat National University, TOPnC Co., Ltd.
Dong Soo Kim, Min Sook Yu, Moon Yong Song
Development of Printed Aluminum Pouch Film for IT and EV of battery
Spain
Universidad de Cádiz, Andaltec
J.J. Relinquem Ismael Romero-Ocana, F.J. Delgado-Gonzalez, F.J Navas-Martos, S.I. Molina
ABS based nanocomposites with thermal conductive properties
Canada
Western University
Mingjun Hu, Tengyuan Zhang, Qiuquan Guo, Xiaobing Cai, and Jun Yang
Direct Pen Writing of Adhesive Particle-Free Ultrahigh Silver Salt-Loaded Composite Ink for Stretchable Circuits
USA
College of Engineering Technology and Physical Sciences, Alabama A&M University
Kyle D. Rose Sr., Mohan D. Aggarwal
Application of Phase Change Material to Increase Solar Panel Efficiency

The €295 Academic Poster rate includes:

  • A poster display in the exhibition hall
  • A full 2 day pass to the conference and exhibition
  • Lunch and drinks
  • Entry into the best poster in show award
The Best Poster award winner will also be given the opportunity to give a 20 minute presentation to speak about the poster in the Exhibition theater.

Requirements

Poster session applicants must be teaching or studying full-time. More than one academic can submit a poster. If you have any queries regarding the criteria please contact us.

The poster authors need to be beside their poster during lunch breaks on 10-11 May.

All posters will be entered into the IDTechEx Show! Best Poster Award. The poster winner will be announced during the drinks reception on the evening of 10 May and featured widely in publicity afterwards.

Submission of Abstracts

If you are interested in displaying a poster at the event please email Molly Muckle at m.muckle@idtechex.com with your contact details, a title and 500 word abstract by 16 March. If your submission is successful we will email you with details on the poster session and guidelines for producing your poster.

Download submission form
 

Contacts


Ms Molly Muckle

m.muckle@IDTechEx.com

+44 1223 812300


Event Administrator