미래 전자 제품을 위한 기능성 재료: 금속, 무기 및 유기 화합물, 그래핀, CNT: IDTechEx

This report is no longer available. Click here to view our current reports or contact us to discuss a custom report.

If you have previously purchased this report then please use the download links on the right to download the files.

미래 전자 제품을 위한 기능성 재료: 금속, 무기 및 유기 화합물, 그래핀, CNT

미래 전자제품에 필요한 정밀 화학 물질: 구조, 형태, 파생물: 기회, 동향, 이유: 투자 위험

모두 보기 설명 목차, 표 및 그림 목록 가격 Related Content
우리는 나노에서 매우 큰 장치에 이르는, 37개 군의 새로운 전자 장치 및 전기 장치를 식별합니다. 500억 달러 이상의 잠재력을 가진 이 새로운 비즈니스에 대해서, 대부분의 화학 및 재료 회사들은 공통적인 제제를 찾음으로써 투자 위험을 줄이려고 한다. 실제로, 새롭게 재 발명된 전기 및 전자 장치를 위한 가장 큰 시장이 상품화되거나 갑자기 붕괴되어 재료 공급업체들이 어려움에 처할 수 있다. 이러한 운명을 피하려면 이 보고서를 읽으십시오.
The chemistry of the new electronics and electrics is key to its future, whether it is invisible, tightly rollable, biodegradable, edible, employing the memristor logic of the human brain or possessing any other previously- impossible capability in a manufactured device. De-risking that material development is vital yet the information on which to base that has been unavailable. No more.
See how the metals aluminium, copper and silver are widely deployed, sometimes in mildly alloyed, nano, precursor, ink or other form. Understand the 12 basic compounds most widely used in the new electronics and electrics and compare them with compounds exhibiting the broadest range of appropriate electrical and optical functions for the future. Those seeking low volume, premium priced opportunities can learn of other broad opportunities. Indeed, we cover in detail all the key inorganic and organic compounds and carbon isomers. We show how the element silicon has a new and very different place beyond the silicon chip. Learn how the tailoring of a chosen, widely-applicable chemical can permit premium pricing and barriers to entry based on strong new intellectual property. For example, see which of 15 basic formulations are used in the anode or cathode of the re-invented lithium-ion batteries of 131 manufacturers and what comes next.
The chart below shows the breakdown of most popular inorganic compounds in new electronics including;
  • Aluminium compound
  • Boron compound
  • Copper compound
  • Gallium compound
  • Indium compound
  • Lithium compound
  • Manganese compound
  • Silicon compound
  • Titanium compound
  • Zinc compound
Most popular inorganic compounds in the new electronics by device family*
*For the full data set please purchase this report
Source: IDTechEx
We identify 37 families of new and rapidly-evolving electronic and electric device, spanning nano to very large devices. Most chemical and material companies wish to de-risk their investment by finding common formulations across this new business that has a potential of over $50 billion for them. This will reduce R&D cost and provide escape routes to sell their current formulations elsewhere if they prove unsuccessful in the first application addressed. Indeed, the biggest markets for new and reinvented electrical and electronic devices may get commoditised first or collapse suddenly, leaving the materials suppliers high and dry. Read this report to avoid such a fate.
Who should buy this report?
All advanced chemical and material manufacturers and developers - both chemical companies and equipment manufacturers with deep vertical integration.
To a lesser extent those making the devices and key circuit technologies such as printed electronics, organic electronics, wide area electrics and very high volume electronics. Smart packaging. Smart labels. Investors and acquirors in these industries, particularly in advanced chemical and material manufacturers and developers. Academics and research centers covering advanced chemicals and materials for electronics and electrics. Particularly huge opportunity in Japan, Germany and USA.
IDTechEx의 분석가 액세스
모든 보고서 구입에는 전문가 분석가와의 최대 30분의 전화통화 시간이 포함되어, 보고서의 주요 결과를 귀하가 제시하는 비즈니스 문제에 연결하도록 돕습니다. 이 전화통화는 보고서를 구매한 후 3개월 이내에 사용해야합니다.
추가 정보
이 보고서에 대해 궁금한 점이 있으시면 언제든지 research@IDTechEx.com으로 보고서 팀에 문의하거나, 영업 관리자에게 문의하십시오

AMERICAS (USA): +1 617 577 7890
ASIA (Japan): +81 3 3216 7209
EUROPE (UK) +44 1223 812300
Table of Contents
1.1.The most important materials by three criteria
1.1.Inorganic elements and compounds most widely needed for growth markets in the new electronics and electrics over the coming decade
1.1.Description and images of the 37 families of new electronics and electrics
1.2.The 20 categories of chemical and physical property exploited by the key materials in the devices are identified
1.2.Number of new device families using elemental or mildly alloyed aluminium, copper, gold, silicon and silver giving % of 37 device families analysed and typical functional form over the coming decade
1.2.Chemical giants reposition to benefit
1.2.1.Itochu and partners
1.2.2.BASF and partners
1.2.3.Dow and others
1.3.Need for de-risking
1.3.The anions or metals in the most popular inorganic compounds in the new electronics by number of device families using them and percentage of the 37 device families (there is overlap for multi-metal formulations). Main functional
1.3.Four families of carbon allotrope needed in the new electronics and electrics
1.4.Organic materials used and researched for the 37 families of new electronics and electrics
1.4.The incidence of the allotropes of carbon that are most widely being used, at least experimentally, for the 37 types of new electronics and electrics giving functional form and % and number of surveyed devices involved
1.4.The most widely useful compounds
1.4.1.Many examples analysed
1.4.2.Possible future importance of the chemistry of iron
1.5.The most versatile compounds electronically
1.5.The families of organic compound that are most widely being used or investigated for the new electronics as % of sample and number of device families using them
1.5.138 manufacturers and putative manufacturers of lithium-based rechargeable batteries showing country, cathode and anode chemistry, electrolyte form, case, targeted applicational sectors and sales relationships and successes by veh
1.6.Examples of relatively less prevalent or less established formulations than those examined earlier
1.6.Cross sectional images of SEM (a, b) and BSEM (c) of Pt/TaOx catalyst on GC electrode
1.6.Disruptive new electronics and electrics - the market pull
1.7.Fine metals and semiconductors that will be most widely used - survey result
1.8.Fine inorganic compounds most widely needed - survey results
1.9.The inorganic compounds - detailed results for 37 families of device
1.10.Allotropes of carbon most widely needed - survey result
1.11.Fine organic compounds most widely needed - survey results
1.12.Survey results for lithium salts in the biggest battery market
1.13.Less prevalent or less established formulations
1.13.1.Tantalum oxide catalyst for polymer electrolyte fuel cells
1.13.2.Tungsten chemistry: new uses
1.14.Structural electronics
1.15.Double helix structure discovered in an inorganic material - November 2016
2.1.Elements being targeted
2.1.Some of the most promising elements employed in research and production of the new electronics and electrics - much broader than today and away from silicon
2.1.Examples of inorganic materials needed for printed electronics and their suppliers.
2.2.Comparison of the more challenging inorganic and organic materials used in printed and potentially printed electronics
2.2.The increasing potential of progress towards the printing and multilayering of electric and electronic devices
2.2.Here come composites and mixtures
2.3.Disparate value propositions
2.3.Attributes and problems of inorganic, hybrid and organic thin film electronics form a spectrum
2.3.Typical quantum dot materials from Evident Technologies and their likely application.
2.4.The leading photovoltaic technologies compared
2.4.Likely impact of inorganic printed and potentially printed technology to 2020 - dominant technology by device and element. Dark green shows where inorganic technology is extremely important for the active (non-linear) components s
2.4.Here comes printing
2.5.Great breadth
2.5.Mass production of flexible thin film electronic devices using the three generations of technology
2.6.Strategy options for chemical companies seeking a major share of the printed electronics market, with examples.
2.6.Fragile chemicals
2.7.Challenges of ink formulation
2.7.Metal interconnect and antennas on a BlueSpark printed manganese dioxide zinc battery supporting integral antenna and interconnects
2.8.Company size is not a problem
2.10.Inorganic vs organic
2.13.Examples of company activity
2.13.1.Dow Chemical
2.13.2.Merck, DuPont and Honeywell
2.14.Progress with Semiconductors
2.15.Printed and multilayer electronics and electrics needs new design rules
2.16.Metamaterials, nantennas and memristors
2.17.The toolkit becomes large
2.17.1.Three dimensional
2.17.2.Leveraging smart substrates
2.17.3.Planned applications can have plenty of area
2.17.4.Health and environment to the fore
2.17.5.Three generations?
3.1.Conductive patterning: antennas, electrodes, interconnects, metamaterials
3.1.Negative refractive index metamaterial bends electromagnetic radiation the "wrong" way
3.1.Key chemicals and materials for conductive patterning: antennas, electrodes, interconnects, metamaterials
3.1.1.Silver flake inks continue to reign supreme for printing
3.1.2.Alternatives gain share
3.1.3.ITO Replacement titanium carbide
3.1.5.For RFID Tags
3.1.6.For logic and memory
3.1.7.For sensors
3.1.8.For smart packaging
3.1.9.For memristors
3.2.CIGS Photovoltaics
3.2.Product Overview of conductive printed electronics
3.2.Split ring resonator and micro-wire array that form negative refractive index material when printed together in the correct dimensions
3.2.1.Brief description of technology
3.3.DSSC Photovoltaics
3.3.Schematic representation of a CIGS thin film solar cell
3.3.Advantages and disadvantages of electrophoretic displays
3.3.1.Brief description of technology
3.4.Electrophoretic displays and alternatives
3.4.Comparison between OLEDs and E-Ink of various parameters
3.4.Principle of operation of electrophoretic displays
3.4.1.Brief description of the technology
3.4.2.Applications of E-paper displays
3.4.3.E ink
3.4.4.The Killer Application
3.4.5.SiPix, Taiwan
3.4.6.Alternatives - electrowetting
3.5.Inorganic LED
3.5.E-paper displays on a magazine sold in the US in October 2008
3.5.138 manufacturers and putative manufacturers of lithium-based rechargeable batteries showing country, cathode and anode chemistry, electrolyte form, case, targeted applicational sectors and sales relationships and successes by veh
3.6.Some materials needs for small molecule vs polymeric OLEDs.
3.6.Retail Shelf Edge Labels from UPM
3.6.Li-ion battery rechargeable
3.7.Rechargeable lithium/lithium metal battery and PEM fuel cell
3.7.Secondary display on a cell phone
3.7.Organisations working in touch screens
3.8.The 20 categories of chemical and physical property exploited by the key materials in the devices are identified
3.8.Amazon Kindle 2, launched in the US in February 2009
3.9.Organic Light Emitting Diode OLED displays and lighting
3.9.Electrophoretic display on a commercially sold financial card
3.9.Four families of carbon allotrope needed in the new electronics and electrics
3.10.Organic materials used and researched for the 37 families of new electronics and electrics
3.10.Flow chart of the manufacture process
3.10.Power semiconductors
3.11.Process for printing LEDs
3.11.1.View of rollout of graphene based devices
3.12.OLED structure showing left the vacuum -based technology
3.13.Examples of OLED light-emitting and hole transport molecules
3.13.Touch screen
3.13.1.Main Touch Technologies
3.13.2.Leading Market Applications
3.13.3.ITO Alternatives for touch screens
3.13.4.Over 100 profiled organizations
3.13.5.Transistor, diode, thermistor, thyristor for electronics
3.13.6.Tungsten chemistry: new uses
3.14.Structural electronics
3.14.Functions within a small molecule OLED, typically made by vacuum processing
3.15.Illustration of how the active matrix OLED AMOLED is much simpler than the AMLCD it replaces.
3.15.Other devices of interest
3.16.New material formats will lead to new devices
3.16.Families of power semiconductor
3.17.Latest power semiconductors by frequency of use
3.18.View of the rollout of graphene in advanced electrical and electronic components
3.19.Touch market forecast by technology in 2012
3.20.Conductance in ohms per square for the different printable conductive materials, at typical thicknesses used, compared with bulk metal, where nanotubes refers to carb on nanotube or graphene
4.1.Carbon nanotubes
4.1.Structure of single-wall carbon nanotubes
4.2.Activities of 113 Organizations
4.2.The chiral vector is represented by a pair of indices (n, m). T denotes the tube axis, and a1 and a2 are the unit vectors of graphene in real space
4.2.1.Graphene could reduce weight of batteries for electric vehicles
4.3.Graphene - the world's thinnest material isolated at The University of Manchester
4.3.Carbon nanotubes and graphene summary
4.4.113 organizations profiled
4.4.Targeted applications for carbon nanotubes by Eikos
5.1.More than the story of ITO
5.2.Key in the newer light emitting devices
5.3.Quantum dots and FETs
5.4.Cost and printability are challenges
5.5.Oxide semiconductor with a new elemental composition
6.1.Piezoelectrics, energy harvesters, supercapacitors, displays and sensors
6.2.Allied topic photocatalysis
7.1.Dielectric for insulation, capacitors and other devices
7.1.Zinc oxide nanowires
7.2.SEM image of the vertically-aligned Ga-doped ZnO nanofiber
7.2.Improving the efficiency of UV LED
8.1."Rechargeable lithium", alkali metal fluorides and other fluorine chemistry
8.1.Energy harvesting technologies by power emitted
8.2.Materials used in the most promising triboelectric harvesting demonstrators
8.2.Fluoropolymer for solution-based OFET processing
8.3.Other New Fluoropolymer Applications in 2015-6
8.3.CYTOP amorphous fluoropolymer
8.4.Rotating 40 mm electret energy harvester

보고서 통계

Pages 212
Tables 22
Figures 43

Subscription Enquiry