PEU_top_banner3


Drinks Reception Sponsor

Printed Electronics World

Latest Printed Electronics News & Analysis from IDTechEx

 
Printed Electronics World
Last article posted Aug 29
First polymer LED that stays lit up when stretched and scrunched
First polymer LED that stays lit up when stretched and scrunched
Researchers say that they have produced the first polymer organic light-emitting diodes (PLEDs) that can be stretched while lit. (29 Aug 2013)
Lab-on-a-chip technology gets a flexible upgrade
Lab-on-a-chip technology gets a flexible upgrade
Microfluidic devices move liquids through tiny, hair-sized pathways carved into glass slides and have distinct advantages over traditional laboratories when it comes to medical diagnostics. (28 Aug 2013)
Improvement in the performance of plastic solar cells
Improvement in the performance of plastic solar cells
Scientists have spent decades trying to build flexible plastic solar cells efficient enough to compete with conventional cells made of silicon. (27 Aug 2013)
Cobalt replacements make solar cells more sustainable
Cobalt replacements make solar cells more sustainable
Researchers have successfully replaced the rare element iodine in copper-based dye-sensitized solar cells by the more abundant element cobalt, taking a step forward in the development of environmentally friendly energy production. (26 Aug 2013)
Imperceptible electronics that are lighter than a feather
Imperceptible electronics that are lighter than a feather
Researchers have succeeded in developing the world's lightest and, simultaneously, the world's thinnest mechanically flexible touch sensor system. (23 Aug 2013)
Smart conductive textiles
Smart conductive textiles
NPL has developed a technique for chemically bonding a nano-silver layer onto fibres in a textile. (21 Aug 2013)
Paper thin e-skin responds to touch
Paper thin e-skin responds to touch
A research team has created the first user-interactive sensor network on flexible plastic. (20 Aug 2013)
Two in one solution for low cost polymer LEDs and solar cells
Two in one solution for low cost polymer LEDs and solar cells
Considerable improvement in device performance of polymer-based optoelectronic devices is reported by researchers. (19 Aug 2013)
 
 

_____________________________________________________________


Press Passes


We are delighted to welcome members of the press to this event. A press pass includes the following entitlements:

  • Attendance to the two day conference and exhibition
  • Access to speaker presentations
  • Attendance to all networking opportunities including drinks receptions, but excluding dinner functions. You can attend the networking dinners at the advertised prices.

If you wish to apply for a press pass or have any queries please contact Sarah Lee at . In order to qualify for a press pass we ask for the following criteria to be met

  • You should be covering RFID for your publication in an editorial role
  • You should be employed as a journalist/editor with no secondary job that may conflict with your primary job (i.e. consultant, advisor)

IDTechEx reserve the right to refuse a press pass on any grounds without reason. Consultants, sales, marketing, public relations and advertising personnel do not qualify for a press pass. Proof of occupation may be required in some instances. If you do not meet the above criteria please click here to register through the usual channel. If you wish to apply for a press pass or have any queries please contact Sarah Lee at

America's largest event on printed and thin film electronics. With over 50 exhibitors and more than 500 delegates anticipated - the whole industry will be at this event. Will you?
 

Speakers include

Sponsors

Exhibitors