Printed and Flexible Sensors 2020-2030: Technologies, Players, Forecasts: IDTechEx

Printed sensor market is projected to reach $4.5bn by 2030

Printed and Flexible Sensors 2020-2030: Technologies, Players, Forecasts

Including organic and hybrid photodetectors, biosensors, ITO replacement materials, wearable electrodes, and piezoresistive, piezoelectric, temperature, touch, gas, humidity and strain sensors.

显示全部 说明 内容、图表列表 价格 Related Content
This IDTechEx Research report provides an extensive overview of the diverse underlying technologies and applications of printed and flexible sensors. This includes organic and hybrid photodetectors, piezoresistive and piezoelectric pressure sensors, stretchable strain sensors, temperature sensors, printed electrodes for skin patches, biosensors, ITO alternatives for capacitive touch sensors, and others. By profiling over 50 companies we map the commercial adoption prospects and challenges for each technology and develop granular market forecasts that span all printed sensor types, technologies, and applications. Our 10-year market forecasts cover 30 applications/technologies and are provided in revenue and printed area.
IDTechEx has been researching the emerging printed electronics market for well over a decade. We launched our first printed and flexible sensor report in 2012. Since then we have stayed very close to the technical and market developments, interviewing and visiting the key players worldwide, organising the largest global tradeshows and conferences, delivering numerous consulting projects, and running classes and workshops on the topic. The depth and breadth of our insight is truly unrivalled.
Printed and flexible sensors constitute the largest printed electronics market. Indeed, we forecast that the market for fully printed sensors will reach $4.5 billion by 2030. This takes place despite the sustained displacement of its largest market - printed glucose test strips - with continuous glucose monitoring (CGM) approaches. The market growth is therefore enabled by the rise of many new applications and technologies.
This printed sensor market is highly complex and fragmented. Some sensors consist of a very simple structure with only a few layers, whilst others are much more complex and require the deposition of multiple layers and sophisticated, innovative materials. Some sensors are sheet-to-sheet screen printed whereas others are made using continuous roll-to-roll printing. The majority are on low-cost flexible large-area substrates, but some are to be found atop CMOS devices or various textile substrates.
This report covers the entire printed and flexible sensor landscape. More specifically, it covers:
  • Large area image sensors
  • Hybrid QD/Organic-on-CMOS image sensors
  • Hybrid sensors for SWIR imaging
  • Piezoresistive sensors
  • Piezoelectric sensors
  • Temperature sensors
  • Capacitive strain sensors
  • ITO alternatives for capacitive touch sensors
  • Gas and humidity sensors
  • Biosensors
  • Printed electrodes for skin patches and e-textiles
We also cover the integration of printed sensors within the emerging technology of flexible hybrid electronics, which included both printed and placed (non-printed) components.
Growth in emerging applications
Printed sensors span a diverse range of technologies and applications, ranging from image sensors to wearable electrodes. Each sensor category seeks to offer a distinct value proposition over the incumbent technology, with a specific motivation for using printing as a manufacturing methodology. Furthermore, each has its different technological and commercial challenges on route to widespread adoption.
Hybrid image sensors
Hybrid image sensors are an especially promising category. They are comprised of a thin film (a few 100 nm) of either an organic semiconductor or quantum dots printed over a silicon readout circuit. They offer three distinct value propositions over the incumbent silicon CMOS detectors: a tuneable bandgap to enable NIR and SWIR imaging at much longer wavelengths, voltage-dependent sensitivity that enables spatially-variable neutral density filter, and more rapid charge collection that facilitates a global rather than rolling shutter.
Critically, hybrid image sensors can be manufactured using repurposed CMOS lines, substantially reducing capital requirements and facilitating more rapid adoption. The OPD-on-CMOS technology is set to be launched imminently in broadcast cameras, while the QD-on-CMOS technology is already commercially available and will transition to higher-power out-door applications as the thermal and light flux stability of the material system evolves over time. Therefore, the technology can migrate from indoor low-light inspection to outdoor applications such as SWIR imaging for autonomous vehicles.
This disruptive hybrid approach meets genuine market needs, demonstrating that integrating printable, functional materials with standard technology and manufacturing methods can enable substantial performance improvements while lowering adoption barriers. To learn more about the current and future status of all technology options and business landscape, and about granular application-segmented applications in this exciting and rapidly developing sector, please consult the report.
Large area image sensors
Large area image sensors based on printed organic photodiodes (OPDs) are an innovative technology, representing a complete change from the conventional CMOS-based image detection and going beyond what other large-area image sensors technologies can offer. The technology has two related value propositions: it is flexible and lightweight, unlike large area a-Si image detectors, and in principle it can be printed rapidly at low cost using continuous manufacturing methods.
However, today there are very few manufacturers, and these are mainly targeting biometric sensing as a relatively high value application, thus enabling them to avoid competing with CMOS. In one proposed application, large area under-the-screen image sensors enable 4 fingerprints to be imaged simultaneously, in contrast to the incumbent technology that either images a single finger or requires a complex optical system to image a large area.
While technically impressive, large area image sensing appears to be largely driven by pushing the technology rather than maker need. It is questionable whether this capability represents a sufficient advance over incumbent methods to overcome the entry barrier to adoption, especially as fingerprint recognition must compete with incumbent methods.
Our report outlines current and future status of the technology, the application roadmap, and the associated market for each application.
Piezoresistive sensors
Printed piezoresistive force sensors are a longstanding application, widely used today in car occupancy sensors, musical instruments, industrial equipment, and some medical devices. While these markets are somewhat commoditized, the sector is innovating to access new, differentiated, higher value applications.
One example is 3D touch panels that can measure applied force as a function position, thus enabling the recognition of complex HMI gestures than the incumbent capacitive touch panels. Suppliers are continuing to target phones, computer gaming and automotive interiors. Other innovations include hybrid capacitive/piezoresistive sensor arrays that detect proximity but require a firm push to actuate, piezoresistive handles as a safety device for power tools, and manufacturing via roll-to-roll processing.
The challenge for differentiating piezoresistive sensors is that many applications do not require sophisticated functionality such as 3D touch or proximity sensing. Furthermore, the revenue streams can widely fluctuate with the various product cycles, requiring very active development of the application pipeline. The relatively low technology complexity can also mean that barriers to entry and the value capture are low. This is convincing some to go higher up in the value chain, offering fully integrated solutions.
Detailed discussion of the current and future status of the technology, the business landscape, and granular application-segmented applications is given in our report
Piezoelectric sensors
Piezoelectric sensors generate a voltage in response to an applied force, rather than changing their resistance. While, like piezoresistive sensors, they can be used for force sensing, they are more expensive to manufacture and less straightforward to integrate. As such, manufacturers are primarily targeting applications that utilize their unique capabilities, specifically their sensitivity to high frequency vibrations.
In this report we cover two printable piezoelectric materials: polymers and inorganic-containing composites. The former have seen greater commercial uptake, but both are still under development. The commercial difficulty for printed piezoelectric sensors is that their capabilities lie midway between two simple established technologies: Affordable piezoresistive pressure sensors, and sensitive, rigid ceramic piezoelectric sensors. As such, piezoelectric sensing applications are rather niche, unless the technological readiness level of energy harvesting dramatically increases to enable self-powered sensors.
A better value proposition, where these materials have unique capability, is for flexible high frequency actuators (i.e. wearable ultrasound generators for medical therapeutics). To learn more about the technologies, players, and market positioning of piezoelectric sensors, please see the report.
ITO remains the incumbent transparent conductive material used in touch screen, despite nearly two-decades of attempts to unseat it. This displacement was partly hampered by technical issues such as stability or haze and partly by commercial reasons. In particular, the dominant strategy of market share protection pursued by ITO suppliers and supported by the previous fall in indium prices drove a tough consolidation in the market.
Nonetheless, these alternatives are finally finding market in flexible or 3D shaped objects, in large-area multi-touch capacitive touch screens, and even nowadays sometimes in lower cost touch screens. Our report includes a detailed technical and commercial benchmarking of the different technology options, an application roadmap, and market forecasts segmented by Ag nanowires, carbon nanotubes, ITO film and various forms of hybrid or printed metal mesh.
Capacitive strain sensors
Various partially or fully printed stretchable strain sensors have been developed and commercialized over the years. Basic technology demonstration has proved relatively easy, but not every supplier has succeeded in transitioning to large-volume capability at lower costs.
The main challenge has been that flexible strain sensors are generally not replacing an existing product, meaning that completely new markets need to be developed. To address this challenge and to capture more value, many suppliers offer vertically integrated 'solutions'.
After years of development opportunities in industrial displacement sensing, in wearable electronics, and in continuous patient monitoring are now emerging. To learn more about the players, the technologies, the application roadmap, and segmented market forecasts please see the report.
Temperature sensors
Printing can also be used to create temperature sensors, using either a composite ink with silicon nanoparticles or carbon nanotubes. Given that temperature measurement requires good thermal contact, sensors based on conformal substrates might seem to offer a clear value proposition.
Their main challenge is the low cost, light weight, and ubiquity of very mature solutions such as thermistors and resistive temperature detectors. These can be deployed with a flexible thermal conductor, thus somewhat nullifying the value proposition of printed temperature sensors. As such, they are best suited to applications that require spatial resolution using conformal array, such as monitoring skin complaints. Monitoring the temperature of batteries in electric vehicles is another possible application, but one that has yet to be widely adopted and could arguably be achieved with multiple thermistors.
Gas and humidity sensors
Gas and humidity sensors can also be printed, although at present most are made from ceramics rather than organic material. Some of these ceramics are printed as a 'thick film' with very high curing temperatures, rendering them incompatible with flexible substrates. Emerging approaches are based around functionalized carbon nanotubes and other organic semiconductors. Multiple sensors with slightly different properties can be combined to form an 'electronic nose', with their composite output exhibiting a different 'fingerprint' for each analyte.
Gas sensors are already used in many industrial contexts and are likely to be increasingly adopted as concern about air pollution grows. Unlike some sectors, there is substantial scope for differentiation by sensitivity and analyte, leading to a fragmented market. Another promising long-term application in which printed gas sensors offer unique capability is directly printing onto food packaging to measure food degradation. However, this will likely require the development of flexible hybrid electronics to make such capability cost-effective via continuous manufacturing, along with the development of enabling technologies such as flexible ICs. Flexible hybrid electronics are discussed in more detail in the IDTechEx report: Flexible hybrid electronics 2020-2030: Applications, challenges, innovations, forecasts.
The largest category of printed sensors by revenue and volume is printed biosensors, dominated by glucose test strips. The annual demand is in the billions. However, use is gradually declining due to the adoption of convenient continuous glucose monitoring, a trend that will continue to grow. In parallel, there have been significant price pressures and commoditization as regulators have sought to supress the test prices and in doing so eroded the margins. Despite all this, this remains the largest volume and revenue business in the printed and flexible sensor landscape. Importantly, printed biosensors are not constrained to glucose sensing and an array of other sensors are emerging.
Wearable electrodes
Today, most medial electrodes comprise a metal snap fastening with an electrolytic gel, but these can only be used for short periods. For continuous monitoring, printed electrodes are gradually being adopted into skin patches, since they last longer, can be integrated into a product together with conductive interconnects (also printed) and are flexible. Wearable electrodes are also well suited to fitness context and have been integrated into e-textiles to monitor heart rate in a comfortable way. Both medical and fitness applications of printed wearable electrodes are likely to increase as the software for continuous monitoring develops thus creating greater demand, although the durability in e-textiles remains a concern for consumers. Skin patches and e-textiles are discussed more comprehensively in the IDTechEx reports: Electronic skin patches: 2020-2030, and E-textiles and Smart Clothing 2020-2030: Technologies, Markets and Players.
Our report discusses each of these printed sensor categories in considerable detail, evaluating the different technologies and the challenges to adoption. We also develop 10-year market forecasts for each technology and application sector, delineated by both revenue and printed sensor area.
从 IDTechEx 访问分析师
所有报告购买订单均包括与一名专家分析师进行 30 分钟的电话交谈,专家分析师将帮助您将报告中的重要发现与您正在处理的业务问题联系起来。这需要在购买报告后的三个月内使用。
如果您对这一报告有任何疑问,请随时联系我们的报告团队 或致电我们的销售经理:

AMERICAS (USA): +1 617 577 7890
ASIA (Japan): +81 3 3216 7209
EUROPE (UK) +44 1223 812300
Table of Contents
1.1.An introduction to printed and flexible sensors
1.2.Opportunities for SWIR image sensors
1.3.Growth areas for printed piezoresistive sensors
1.4.Printed piezoresistive sensor application assessment
1.5.Solution processed or hybrid ITO alternatives for capacitive touch
1.6.Opportunities for printed temperature sensors
1.7.Opportunities for printed gas/humidity sensors
1.8.Wearable technology: An opportunity for capacitive strain sensors.
1.9.Glucose test strips: A large but declining market
1.10.Printed wearable electrode sensors: Opportunities in healthcare and fitness monitoring.
1.11.10-year forecast for printed sensor revenue by sensor type (Sensor categories: Image, pressure, gas & humidity, temperature, strain, wearable, glucose test strips)
1.12.10-year printed sensor forecast by revenue (Sensor categories: Image, pressure, gas & humidity, temperature, strain, wearable)
1.13.10-year printed sensor forecast by revenue: All categories
1.14.10-year printed sensor forecast by unit volume (in m2): All categories
1.15.10-year printed sensor forecast by unit volume (in m2): All categories (excluding biosensors)
1.16.Key takeaways
2.1.What is a sensor?
2.2.Sensor value chain example: Digital camera
2.3.What defines a 'printed' sensor?
2.4.Printed sensor manufacturing
2.5.Motivation for printed electronics: Flexibility
2.6.Motivation for printed electronics: Ease of manufacturing
2.7.A brief overview of screen, slot-die, gravure and flexographic printing
2.8.A brief overview of digital printing methods
2.9.Towards roll to roll (R2R) printing
2.10.Printed sensor categories
2.11.What proportion is printed?
2.12.Opportunities for printed sensors: Facilitating computational data analysis
2.13.Opportunities for printed sensors: Healthcare
2.14.Opportunities for printed sensors: Human machine interfaces (HMI)
3.1.1.Types of printed photodetectors/image sensors
3.1.2.Photodetector working principles
3.1.3.Quantifying photodetector and image sensor performance
3.1.4.The printed photodetector competitive landscape
3.2.Organic photodetectors for large area image sensors
3.2.1.Organic photodetectors (OPDs)
3.2.2.OPDs: Advantages and disadvantages
3.2.3.Reducing OPD dark current
3.2.4.Manipulating the detection wavelength
3.2.5.Extending OPDs to the NIR region: Use of cavities
3.2.6.Manufacturing challenges for cavity OPDs
3.2.7.What can you do with organic photodetectors?
3.2.8.'Fingerprint on display' with OPDs
3.2.9.Challenges for printed OPDs
3.2.10.First OPD production line
3.2.11.Applications based on TFT active matrix
3.2.12.Manipulating OPD properties by changing molecular structure.
3.2.13.OPDs for biometric security
3.2.14.Spray-coated organic photodiodes for medical imaging.
3.2.15.Flexible image sensors based on amorphous Si
3.2.16.Materials for OPDs
3.2.17.Challenges for large area OPD adoption
3.2.18.Technical requirements/manufacturing approaches for OPD applications: Biometric recognition, smart shelving, x-ray sensing and SWIR imaging
3.2.19.SWOT analysis of large area OPD image sensors
3.2.20.Organic photodetector forecast
3.3.Motivation for infra-red sensing
3.3.1.Applications for NIR/SWIR imaging
3.3.2.SWIR for autonomous mobility
3.3.3.Other SWIR benefits: Better hazard detection
3.3.4.Towards broadband hyperspectral imaging
3.3.5.SWIR sensitivity of PbS QDs, Si, polymers, InGaAs, HgCdTe, etc...
3.3.6.NIR sensing: limitation of Si CMOS
3.3.7.Existing long wavelength detection: InGaAs
3.3.8.InGaAs sensor design: Solder bumps limit resolution
3.3.9.Innovative silicon based SWIR sensors (Trieye)
3.3.10.OmniVision: making silicon CMOS sensitive to NIR (II)
3.3.11.SWIR: Incumbent and emerging technology options
3.4.OPD on CMOS hybrid image sensors
3.4.1.OPD on CMOS hybrid image sensors
3.4.2.Hybrid organic/CMOS sensor for broadcast cameras
3.4.3.Comparing hybrid organic/CMOS sensor with backside illumination CMOS sensor
3.4.4.Hybrid organic/CMOS sensor (III)
3.4.5.Progress in CMOS global shutter using silicon technology only
3.4.6.Fraunhofer FEP: SWIR OPD-on-CMOS sensors
3.4.7.SWOT analysis of OPD-on-CMOS image sensors
3.5.Quantum dot on CMOS hybrid image sensors
3.5.1.Quantum dots as optical sensor materials
3.5.2.Lead sulphide as quantum dots
3.5.3.Quantum dots: Choice of the material system
3.5.4.Applications and challenges for quantum dots in image sensors
3.5.5.QD layer advantage in image sensor (I): Increasing sensor sensitivity and gain
3.5.6.QD-Si hybrid image sensors(II): Reducing thickness
3.5.7.Detectivity benchmarking
3.5.8.QD-Si hybrid image sensors(III): Enabling high resolution global shutter
3.5.9.QD-Si hybrid image sensors(IV): Low power and high sensitivity to structured light detection for machine vision?
3.5.10.Advantage of solution processing: ease of integration with ROIC CMOS?
3.5.11.How is the QD layer applied?
3.5.12.QD optical layer: Approaches to increase conductivity of QD films
3.5.13.Quantum dots: Covering the range from visible to near infrared
3.5.14.Hybrid quantum dots for SWIR imaging (I)
3.5.15.SWIR Vision Sensors: first QD-Si cameras and/or an alternative to InVisage (now Apple)?
3.5.16.SWIR Vision Sensors: First commercial QD-CMOS cameras
3.5.17.Emberion: QD-graphene SWIR sensor
3.5.18.Emberion: QD-Graphene-Si broad range SWIR sensor
3.5.19.QD-on-CMOS from Hanyang University (South Korea)
3.5.20.Challenges for QD-Si technology for SWIR imaging.
3.5.21.Advantage of solution processing: Ease of integration with CMOS ROICs?
3.5.22.Quantum dot films: Processing challenges
3.5.23.How is the QD layer applied?
3.5.24.PdS QDs: Optical sensor with high responsibility and wide spectrum
3.5.25.Results and status for QD-Si sensors
3.5.26.Nanoco loses the Apple project
3.5.27.QD-on-CMOS integration examples (IMEC)
3.5.28.QD-on-CMOS integration examples (RTI International)
3.5.29.QD-on-CMOS integration examples (ICFO)
3.5.30.QD-on-CMOS integration examples (ICFO continued)
3.5.31.Overview of OPD-on-CMOS and QD-on-CMOS sensors
3.5.32.Prospects for QD/OPD-on-CMOS detectors
3.5.33.QD-on-CMOS sensors ongoing technical challenges
3.5.34.SWOT analysis of QD-on-CMOS image sensors
3.6.Summary: Printed image sensors
3.6.1.Comparison of image sensors technologies
3.6.2.Printed photodetector application assessment
3.6.3.Printed image sensor supplier overview
3.6.4.Technology readiness level snapshot of printed image sensors
3.6.5.Printed image sensor adoption roadmap
3.6.6.Printed image sensor application status summary
3.6.7.Printed image sensors forecast methodology organic photodetector forecast by sales volume (in m2) and revenue printed/hybrid image sensors forecast by sales volume (in m2) and revenue
3.6.10.Company profiles: Printed image sensors
4.1.1.Printed piezoresistive sensors: An introduction
4.1.2.Comparison with capacitive touch sensors
4.2.Printed piezoresistive sensor technology
4.2.1.What is piezoresistance?
4.2.2.Percolation dependent resistance
4.2.3.Quantum tunnelling composite
4.2.4.Printed piezoresistive sensors: Anatomy
4.2.5.Pressure sensing architectures
4.2.6.Thru mode sensors
4.2.7.Shunt mode sensors
4.2.8.Force vs resistance characteristics
4.2.9.Manipulating the force-resistance curve
4.2.10.Importance of actuator area
4.2.11.FSR inks
4.2.12.Complete material portfolio approach is common
4.2.13.Composition dependence
4.2.14.Shunt-mode FSR sensors by the roll
4.2.15.Example FSR circuits
4.2.16.Effect of circuit design on sensor output multi-touch pressure sensors
4.2.18.Matrix pressure sensor architecture
4.2.19.Printed foldable force sensing solution
4.2.20.Hybrid FSR/capacitive sensors (Tangio)
4.2.21.Hybrid FSR/capacitive sensors
4.2.22.Curved sensors with consistent zero (Tacterion)
4.2.23.Technological development of piezoresistive sensors.
4.3.Applications of printed piezoresistive sensors
4.3.1.Applications of piezoresistive sensors
4.3.2.Medical applications of printed FSR (Tekscan)
4.3.3.Teeth topography from Innovation Lab
4.3.4.Large-area pressure sensors
4.3.5.Force sensor examples: Sensing Tex
4.3.6.Force sensor examples: Vista Medical
4.3.7.Automotive occupancy and seat belt alarm sensors
4.3.8.Consumer electronic applications of printed FSR
4.3.9.Textile-based applications of printed FSR
4.3.10.SOFTswitch: Force sensor on fabric
4.3.11.Pressure sensitive fabric (Vista Medical)
4.3.12.Piezoresistive sensors in smartphones
4.3.13.A portable MIDI controller - The Morph (Sensel)
4.3.14.Smart carpet to enforce social distancing (due to coronavirus)
4.3.15.Printed piezoresistive sensor application assessment
4.4.Summary: Printed piezoresistive sensors
4.4.1.Business models for printed piezoresistive sensors
4.4.2.R2R vs S2S manufacturing
4.4.3.Readiness level snapshot of printed piezoresistive sensor technologies
4.4.4.Force sensitive resistor sensor supplier overview
4.4.5.Printed piezoresistive sensor adoption roadmap
4.4.6.SWOT analysis of piezoresistive sensors printed piezoresistive sensor forecast by sales volume (in m2) and revenue (Categories: industrial, medical, consumer, automotive)
4.4.8.Summary: Printed piezoresistive sensor applications
4.4.9.Company profiles: Piezoresistive sensors
5.1.1.Piezoelectricity: An introduction
5.1.2.Piezoelectric polymers
5.1.3.PVDF-based polymer options for sensing and haptic actuators
5.1.4.Low temperature piezoelectric inks (I) (Meggitt)
5.1.5.Piezoelectric polymers
5.1.6.Printed piezoelectric sensor
5.1.7.Printed piezoelectric sensors: prototypes
5.1.9.Piezoelectric actuators in loudspeaker/microphones
5.1.10.PiezoPaint (Meggit)
5.1.11.Haptic actuators
5.1.12.Example application: Haptic gloves
5.1.13.Combining energy harvesting and sensing
5.2.Summary: Printed piezoelectric sensors
5.2.1.SWOT analysis of piezoelectric sensors
5.2.2.Piezoelectric sensor supplier overview pressure sensor forecast (piezoelectric and hybrid) by sales volume (in m2) and revenue
5.2.4.Summary: Piezoelectric sensors
5.2.5.Company profiles: Piezoelectric sensors
6.1.1.High-strain sensors (capacitive)
6.1.2.Use of dielectric electroactive polymers (EAPs)
6.2.Strain sensor applications
6.2.1.Players with EAPs: Parker Hannifin
6.2.2.Strain sensor applications
6.2.3.Players with EAPs: Stretchsense
6.2.4.Players with EAPs: Bando Chemical
6.2.5.C Stretch Bando: Progress on stretchable sensors
6.2.6.Other strain sensors (capacitive & resistive)
6.2.7.Strain sensor examples: Polymatech
6.2.8.Strain sensor example: Yamaha and Kureha
6.2.9.Strain sensor examples: BeBop Sensors
6.2.10.Industrial displacement sensors (LEAP Technology)
6.3.Summary: Strain sensors
6.3.1.Summary: Strain sensors
6.3.2.SWOT analysis of flexible strain sensors
6.3.3.Printed strain sensor forecast
6.3.4.Printed high-strain sensor supplier overview
6.3.5.Company profiles: Strain sensors
7.1.1.Capacitive sensors
7.1.2.Printed capacitive sensors
7.1.3.Conductive materials for capacitive sensors
7.2.Transparent conductive materials: ITO
7.2.1.ITO film assessment: performance, manufacture and market trends
7.2.2.ITO film shortcomings: flexibility
7.2.3.ITO film shortcomings: limited sheet conductivity
7.2.4.ITO film shortcomings: Limited sheet resistance
7.2.5.ITO film shortcomings: index matching
7.2.6.ITO film shortcomings: thinness
7.2.7.ITO film shortcomings: price falls and commoditization
7.2.8.ITO films: Current prices (2018)
7.2.9.Indium: Price fluctuations drive innovation
7.2.10.Indium's single supply risk: real or exaggerated?
7.2.11.Recycling comes to the rescue?
7.2.12.SWOT analysis of ITO
7.3.ITO alternatives: Silver nanowires (Ag NW)
7.3.1.Silver nanowires: basic introduction
7.3.2.Ag NW: growth process
7.3.3.Ag NWs: roll to roll formation
7.3.4.Ag NW: Trade off between sheet resistance and transmission
7.3.5.Ag NWs: Mechanical flexibility
7.3.6.Ag NWs: 300,000 cycles and more with 1mm radius
7.3.7.Ag NW: Patterning
7.3.8.Ag NW: Ready-to-expose films?
7.3.9.Ag NW: the haze issue
7.3.10.Ag haze: Demonstrating impact of NW aspect ratio
7.3.12.Ag NWs: The stability issue been finally solved?
7.3.13.Ag NWs: Photostability
7.3.14.Ag NWs: Past or existing applications
7.3.15.Ag NWs: Emerging applications
7.3.16.Improving conductivity between Ag NWs - C3 Nano
7.3.17.Foldable displays incorporating C3 Nano's AgNWs
7.3.18.Future trends...
7.3.19.Combining AgNW and CNTs for a TCF material (Chasm)
7.3.20.Prospects for Ag NW adoption
7.3.21.SWOT analysis of silver nanowires as a transparent conductor
7.4.ITO Alternatives: Metal mesh
7.4.1.Metal mesh: Photolithography followed by etching
7.4.2.Fujifilm's photo-patterned metal mesh
7.4.3.Toppan Printing's copper mesh transparent conductive films
7.4.4.Panasonic's large area metal mesh
7.4.5.GiS (integrator): Large area metal mesh displays
7.4.6.Embossing/imprinting metal mesh
7.4.7.O-Film's metal mesh technology: The basics
7.4.8.Will O-Film rejuvenate its metal mesh business after disappointing sales?
7.4.9.MNTech's metal mesh TCF technology (the incident)
7.4.10.J-Touch: substantial metal mesh capacity
7.4.11.Nanoimprinting metal mesh with 5um linewidth
7.4.12.Metal mesh TCF is flexible
7.4.13.Direct printed metal mesh transparent conductive films: performance
7.4.14.Direct printed metal mesh transparent conductive films: major shortcomings
7.4.15.Komura Tech: Improvement in gravure offset printed fine pattern (<5 um) metal mesh TCF ?
7.4.16.Shashin Kagaku: offset printed metal mesh TCF
7.4.17.Komori: Gravure offset all-printed metal mesh film?
7.4.18.Asahi Kasei: taking steps to commercialize its R2R ultrafine printing process
7.4.19.How is the ultrafine feature R2R mold fabricated?
7.4.20.Konica Minolta: inkjet printing large area fine pitch metal mesh TCFs with <10um linewidth?
7.4.21.Gunze: S2S screen printing finds a market fit?
7.4.22.Toray's photocurable screen printed paste for fine line metal mesh
7.4.23.Ishihara Chemical's gravure printed photo-sintered Cu paste
7.4.24.Toppan Forms: Ag salt inks to achieve 4um printed metal mesh?
7.4.25.Eastman Kodak: Transparent ultra low-resistivity RF antenna using printed Cu metal mesh technology
7.4.26.Kuroki/ITRI: printed seed layer and plate Cu metal mesh?
7.4.27.Replacing photolithography with photoresist printing for ultra fine metal mesh
7.4.28.LCY gravure printing photoresist then etching
7.4.29.Screen Holding: gravure printing photoresist then etching
7.4.30.Consistent Materials' photoresist for metal mesh
7.4.31.Tanaka Metal's metal mesh technology
7.5.ITO Alternatives: Carbon nanotubes (CNTs)
7.5.1.Introduction to Carbon Nanotubes (CNT)
7.5.2.CNTs: Ideal vs reality
7.5.3.Not all CNTs are equal
7.5.4.Benchmarking of different CNT production processes
7.5.5.Price position of CNTs (from SWCNT to FWCNT to MWCNT)
7.5.6.Carbon nanotube transparent conductive films: performance
7.5.7.Carbon nanotube transparent conductive films: performance of commercial films on the market
7.5.8.Carbon nanotube transparent conductive films: Matched index
7.5.9.Carbon nanotube transparent conductive films: mechanical flexibility
7.5.10.Example of wearable device using CNT
7.6.ITO alternatives: PEDOT:PSS
7.6.2.Patterning PEDOT:PSS
7.6.3.Performance of PEDOT:PSS has drastically improved
7.6.4.PEDOT:PSS is now on a par with ITO-on-PET
7.6.5.PEDOT:PSS is mechanically flexible
7.6.6.Stability and spatial uniformity of PEDOT:PSS
7.6.7.Commercial product using PEDOT:PSS
7.6.8.Use case examples of PEDOT:PSS TCFs
7.6.9.Force Foundation: PEDOT used in solution coated smart windows
7.6.10.SWOT analysis of PEDOT:PSS as a TCF
7.7.Summary of ITO alternatives
7.7.1.Quantitative benchmarking of different TCF technologies
7.7.2.Technology comparison
7.7.3.TCF material supplier overview
7.7.4.Company profiles: ITO alternatives for capacitive touch
8.1.1.Introduction to printed temperature sensors
8.1.2.Types of temperature sensors
8.1.3.Comparing resistive temperature sensors and thermistors
8.1.4.PST Sensors: Silicon nanoparticles ink
8.1.5.Printed silicon nanoparticle sensors (PST)
8.1.6.Printed metal RTD sensors: Brewer Science
8.1.7.Substrate challenges for printed temperature sensors
8.1.8.Academic research: Printed temperature sensor with stabilized PEDOT:PSS
8.2.Applications of printed temperature sensors
8.2.1.Coffee temperature sensors
8.2.2.Research at PARC (Xerox)
8.2.3.Time Temperature Indicators (TTIs)
8.2.4.Chemical TTIs
8.2.5.Chemical Time Temperature Indicators
8.2.6.Examples of Chemical Time Temperature Indicators (TTIs)
8.2.7.Proof-of-concept prototype of an integrated printed electronic tag
8.2.8.Wearable temperature monitors
8.2.9.Novel applications for flexible temperature sensors
8.2.10.CNT temperature sensors (Brewer Science)
8.2.11.Temperature monitoring for electric vehicles batteries
8.2.12.Printed temperature sensors and heaters (IEE)
8.3.Summary: Printed temperature sensors
8.3.1.SWOT analysis of printed temperature sensors
8.3.2.Printed temperature sensor supplier overview
8.3.3.Prospects for temperature sensors printed temperature sensors forecast by sales volume (m2) and revenue (Categories: organic and inorganic active materials)
8.3.5.Company profiles: Printed temperature sensors
9.1.1.Printed gas sensors: An introduction
9.2.Gas sensor technology
9.2.1.Gas sensor industry
9.2.2.History of chemical sensors
9.2.3.Transition to miniaturised gas sensors
9.2.4.Comparison between classic and miniaturised sensors
9.2.5.Concentrations of detectable atmospheric pollutants
9.2.6.Five common detection principles for gas sensors
9.2.7.Sensitivity for main available gas sensors
9.2.8.Comparison of miniaturised sensor technologies
9.2.9.Pellistor gas sensors
9.2.10.Metal oxide semiconductors (MOS) gas sensors
9.2.11.Printing MOS sensors
9.2.12.Electrochemical (EC) gas sensors
9.2.13.Infrared gas sensors
9.2.14.Electronic nose (e-Nose)
9.2.15.Integrating an 'electronic nose' with a flexible IC
9.2.16.Screen printed MOS sensors (Figaro)
9.2.17.MOS gas sensors with printed electrodes (FIS)
9.2.18.Printed components of electrochemical gas sensor
9.2.19.Printed traditional EC gas sensor
9.2.20.Screen printed miniaturised EC gas sensor
9.2.21.Screen printed MOS sensors (Renesas Electronics)
9.2.22.Printed carbon nanotube based gas sensors
9.2.23.Printed humidity/moisture sensor (Brewer Science)
9.2.24.Humidity sensors based on organic electronics (Invisense)
9.3.Emerging markets for printed gas sensors
9.3.1.Gas sensors will find use in various IoT segments
9.3.2.Gas sensors in automotive industry
9.3.3.Emerging market: Personal devices
9.3.4.Gas sensors for mobile devices
9.3.5.Mobile phones with air quality sensors
9.3.6.H2S professional gas detector watch
9.3.7.Air quality monitoring for smart cities
9.3.8.Home And Office Monitoring: A Connected Environment
9.4.Summary: Gas and humidity sensors
9.4.1.Prospects for gas and humidity sensors
9.4.2.The gas sensor value chain
9.4.3.Technology readiness level snapshot of gas sensors
9.4.4.Supplier overview: Printed gas and humidity sensors
9.4.5.Porters' five forces analysis for printed gas sensors
9.4.6.Future challenges for sensor manufacturers printed gas and humidity sensors forecasts by sales volume (in m2) and revenue (Categories: uMOS, electrochemical, CNT, humidity)
9.4.8.Company profiles: Gas and humidity sensors
10.1.1.Electrochemical biosensors present a simple sensing mechanism
10.1.2.Electrochemical biosensor mechanisms
10.1.3.Enzymes used in PoC electrochemical biosensors
10.1.4.Electrode deposition: screen printing vs sputtering
10.1.5.Challenges for printing electrochemical test strips
10.2.Biosensors for glucose sensing
10.2.1.Anatomy of a glucose test strip
10.2.2.Glucose test strip monitoring through an associated reader
10.2.3.Sensors for diabetes management roadmap
10.2.4.Summary: Printed biosensors
10.2.5.Introduction to printed biosensors for diabetes management
10.2.6.CGM begins to replace test strips (Abbott)
10.2.7.Comparing test strip costs with CGM
10.2.8.Continuous glucose monitoring (CGM) is causing glucose test strip use to decline.
10.3.Printed biosensors for other applications
10.3.1.Electrochemical sensors are a more accurate method of ketone monitoring
10.3.2.Lactic acid monitoring for athletes
10.3.3.Traditional lactic acid monitors
10.3.4.Cholesterol as an early indicator of cardiovascular disease
10.3.5.A real market for PoC cholesterol tests?
10.4.Summary: Biosensors
10.4.1.The future of electrochemical PoC biosensors
10.4.2.SWOT analysis of printed biosensors
10.4.3.Supplier overview: Biosensors
10.4.4.Printed biosensors market forecast
10.4.5.Biosensors: Company profiles
11.1.1.Introduction to printed wearable electrodes and skin patches
11.1.2.Applications for electrodes and skin patches
11.1.3.Using electrodes to measure biopotential
11.1.4.Disposable metal snap electrodes - the current electrode technology
11.1.5.Market for metal snap Ag/AgCl electrodes
11.1.6.Skin patches with integrated electrodes - an opportunity for printed electrodes.
11.2.Examples of printed electrodes in skin patches
11.2.1.Smart patch with printed silver ink (Quad Industries)
11.2.2.QT Medical develop printed electrodes and interconnects
11.2.3.Printed electrodes and interconnects for pregnancy monitoring (Monica Healthcare)
11.2.4.Flexible and stretchable electrode (ScreenTec OY)
11.2.5.Printed wireless wearable electrodes (Dupont)
11.2.6.Printable dry ECG electrodes (Henkel)
11.2.7.New printed electrode materials form Henkel
11.2.8.Comparing printed and metal snap electrode performance
11.2.9.Advantages of printed dry electrode adhesives
11.2.10.Grid printed electrodes (Nissha GSI)
11.2.11.Alternative printed electrode materials
11.3.Electrodes in smart clothing and e-textiles
11.3.1.E-Textiles: Where textiles meet electronics
11.3.2.Biometric monitoring in apparel
11.3.3.Integrating heart rate monitoring into clothing
11.3.4.Sensors used in smart clothing for biometrics
11.3.5.Companies with biometric monitoring apparel products
11.3.6.Textile electrodes
11.3.7.E-textile material use over time
11.3.8.Printed electrodes on clothing (Toyobo)
11.3.9.Monitoring racehorse health with printed electrodes (Toyobo)
11.3.10.Stretchable conductive printed electrodes (Nanoleq)
11.4.Summary: Flexible wearable electrodes
11.4.1.SWOT analysis of printed flexible wearable electrodes
11.4.2.Summary: Flexible wearable electrodes
11.4.3.Supplier overview: Printed electrodes for skin patches and e-textiles
11.4.4.Company profiles: Flexible wearable electrodes
12.1.1.Defining flexible hybrid electronics (FHE)
12.1.2.FHE Examples: Combing conventional components with flexible/printed electronics on flexible substrates
12.1.3.FHE: The best of both worlds?
12.1.4.Overcoming the flexibility/functionality compromise
12.1.5.What counts as FHE?
12.1.6.Integrating sensors in FHE circuits
12.2.Examples of printed sensors in FHE circuits
12.2.1.Wine temperature sensing label
12.2.2.Printed electronics enabling multi component integration some use NFC as wireless power
12.2.3.Wearable ECG sensor from VTT
12.2.4.PlasticArm: An electronic nose with FHE
12.2.5.PlasticArm: Utilizing bespoke flexible processors
12.2.6.Condition monitoring multimodal sensor array
12.2.7.'Sensor-less' sensing of temperature and movement
12.2.8.FHE and printed sensors for smart packaging.
12.3.Summary: Printed sensors in FHE circuits
12.3.1.SWOT analysis of printed sensors in FHE circuits
12.3.2.Supplier overview: Printed sensors in FHE circuits
12.3.3.Company profiles: Flexible hybrid electronics
13.1.1.Market forecast methodology
13.1.2.Difficulties of forecasting discontinuous technology adoption printed sensors forecast by sales volume (in m2) (sensor categories: image, pressure, gas & humidity, temperature, strain, wearable electrodes) overall printed sensors forecast by revenue (no biosensors) overall printed sensors forecast by revenue (with biosensors) printed sensor forecast by revenue: All categories (except biosensors)
13.1.7.Printed image sensors forecast methodology organic photodetector forecast by volume (in m2) and by revenue printed/hybrid image sensors forecast by volume (in m2) and by revenue piezoresistive sensor forecast by volume (in m2) and by revenue other pressure sensor forecast (piezoelectric and hybrid) by volume (in m2) and by revenue printed strain forecast by volume (in m2) and by revenue printed temperature sensor forecast (Categories: inorganic and organic) printed gas and humidity sensors forecasts by sales volume (in m2) and revenue (Categories: uMOS, electrochemical, CNT, humidity) printed biosensors forecast by volume in m2 and revenue wearable electrodes forecast by volume in m2 and revenue (Categories: Skin patch electrodes, smart clothing electrodes, other wearable electrodes) forecast: Material opportunities from printed sensors (by revenue and volume)

Ordering Information

Printed and Flexible Sensors 2020-2030: Technologies, Players, Forecasts

电子版(1-5 名用户)
电子版(6-10 名用户)
电子版及 1 份硬拷贝文件(1-5 名用户)
电子版及 1 份硬拷贝文件(6-10 名用户)
电子版(1-5 名用户)
电子版(6-10 名用户)
电子版及 1 份硬拷贝文件(1-5 名用户)
电子版及 1 份硬拷贝文件(6-10 名用户)
电子版(1-5 名用户)
电子版(6-10 名用户)
电子版及 1 份硬拷贝文件(1-5 名用户)
电子版及 1 份硬拷贝文件(6-10 名用户)
电子版(1-5 名用户)
电子版(6-10 名用户)
电子版及 1 份硬拷贝文件(1-5 名用户)
电子版及 1 份硬拷贝文件(6-10 名用户)
Click here to enquire about additional licenses.
If you are a reseller/distributor please contact us before ordering.
お問合せ、見積および請求書が必要な方は までご連絡ください。

Subscription Enquiry