Research Articles

In this two-part article Dr Khasha Ghaffarzadeh, a leading industry expert and Research Director at IDTechEx will discuss the global graphene market.

Nov 20-21 | Santa Clara, CA 10% Attendee Discount - Ends Friday, 1 November

Flexible, thin and/or printed batteries (or batteries with novel form factors) are back on the agenda thanks to the rise of Internet of Things (IoT), wearables, and environmental sensors. Find out more at the forthcoming IDTechEx Show, Nov 20-21.

Those desperate to invest in "The next Tesla" continue to pile into start-up Rivian, the latest $350 million coming from a media company. That takes investment up to the $2 billion level familiar at Tesla.

IDTechEx Analysts Share 5 Key Lessons from Healthcare Sensor Innovations 2019. Healthcare Sensor Innovations 2019 was a conference and table-top exhibition organized by IDTechEx, a market intelligence and events company. The event was held over 25-26 September 2019 in Cambridge, United Kingdom and attracted over 185 delegates from over 23 countries. Forty speakers from the healthcare, electronics, and materials industries shared their progress in wearables and sensors for point-of-care diagnostics and continuous monitoring. IDTechEx technology analysts Dr Nadia Tsao and Dr Ivan De Backer explore the technology developments and market trends presented at Healthcare Sensor Innovations 2019.

Plastic is everywhere, and that is the problem. There is a huge drive to address the concerns that consumers and industry alike have regarding the longevity of plastic in the environment.

New IDTechEx Research report investigates the market for various die and substrate attach materials used in power electronics in various electric vehicles. It provides a comprehensive view of the industry trends, looking at the trends driving the adoption of higher performance die-attach materials.

With just over a month to go until Graphene & 2D Materials USA 2019, IDTechEx's Senior Technology Analyst, Dr Richard Collins caught up with Dr Rune Wendelbo of Abalonyx to hear his thoughts on graphene oxide manufacturing and the opportunity for graphene.

Graphene USA is the most commercially-focused conference and exhibition on graphene and other 2D materials. It is where companies unveil their latest technologies, launch their products, where technologists announce their latest commercially-relevant results, and where suppliers and end users from a variety of industries directly connect.

48V Full Hybrid is a Prius killer. New research by IDTechEx in its report, "48V Mild Hybrid and 48V Full Hybrid Vehicles 2020-2030" reveals that the 48V mild hybrid powertrain is a done deal. Started in 2016, now a flood of car models have this, to keep them legal in the face of tightening emissions laws and save fuel.

Healthcare Sensor Innovations, a brand-new event hosted by IDTechEx, opened to a packed audience in Cambridge, UK, last week. The event focused on the use of wearables and sensors in enabling the point-of-care diagnostics and continuous monitoring of individuals for health and wellness.

The new IDTechEx report, "Solar Cars, Buses, Trucks, Trains 2020-2030" explains how we even have energy-positive electric vehicles now. This is leading to dual functions with considerable benefits to society and paybacks.

The printed electronics industry has been quietly refocusing over the last few years, with players seeking specific opportunities where the technology adds strong value for the application. In this article, we explore some of the key trends in printed electronics in 2019.

With just over a month to go until Graphene & 2D Materials USA 2019, IDTechEx's Senior Technology Analyst, Dr Richard Collins caught up with Dr Youn-Su Kim of LG Electronics Inc. to hear his thoughts on the growth of CVD graphene and the graphene market.

Since 2014, there has been a surge in investment into companies engaging in the 3D printing of composites, with almost $250 million raised to date. The latest report from IDTechEx "3D Printing Composites 2020-2030: Technology and Market Analysis" authored by Dr Bryony Core and Dr Richard Collins examines the key trends and innovations in this emerging technology.

Why are axial flux versions coming in fast in certain applications? Why is reluctance becoming much more of the picture in other applications? Escape routes from dysprosium price hikes? Why the acquisition frenzy? What is its focus? It is all here including a comprehensive directory of suppliers. The new report, "Electric Motors for Electric Vehicles 2020-2030 land, Water, Air", explains and predicts what comes next for 101 categories of EV land, water and air, hybrid and pure electric.

Quantum dots are a successful example of nanotechnology. We at IDTechEx Research expect that QDs will be used in over 7 Msqm of displays in 2019 (for exact forecasts consult our report). The current dominant method of quantum dot integration in displays is the film-type. This is a non-ideal solution designed as a workaround to current material shortcomings. However, as the QD material system expands, new methods of integration as well as new applications beyond displays will become enabled.

With just over a month to go until Graphene & 2D Materials USA 2019, IDTechEx's Senior Technology Analyst, Dr Richard Collins caught up with Dr Bor Jang of Global Graphene Group to hear his thoughts on graphene manufacturing and the opportunity for Graphene.

Registrations for the inaugural Healthcare Sensors Innovation event in Cambridge on 25-26 September is exceeding all expectations and nears venue capacity. The event is successfully bringing together the linchpins of the healthcare industry with the electronics industry to explore the opportunity in two specific areas: point of care diagnostics and continuous monitoring.

This is the second of a two part series exploring wearable medical devices. In part 1, IDTechEx discussed trends indicating that "the future of wearable is medical". In part 2, we explore the question in reverse, asking to what extent "the future of wearables is medical."

IDTechEx will be hosting a free webinar on Wednesday 2 October 2019 titled Lithium-Ion Batteries for Electric Vehicles.

IDTechEx Research Asks What Happens To Retired Electric Vehicle Batteries: You Live More Than Once. By 2030, second-life battery capacity will hit over 275GWh per year which presents huge opportunities for energy storage, according to IDTechEx's latest report named Second-life Electric Vehicle Batteries 2020-2030.

It is certain that lithium batteries will be dominant over the coming decade and their chemistry will change in pursuit of reduction in cost and flammability and to obtain greater energy density. Uniquely, IDTechEx forecasts the biggest application - electric vehicles - in 101 categories, but any forecast has assumptions that matter a great deal. In the IDTechEx report, "Lithium-Ion Batteries for Electric Vehicles 2020-2030", IDTechEx forecasts ten years assuming, not predicting, no global recession and no shortages.

IDTechEx will be hosting a free webinar on Tuesday 1 October 2019 titled Here Come 48V Full Hybrids.

IDTechEx will be hosting a free webinar on Thursday 3 October 2019 titled Is The Tipping Point For Graphene Commercialisation Approaching?

The IDTechEx Show! in Santa Clara, California on November 20-21 has it all. There will be over 270 exhibitors engaging with 3,500 attendees; seven parallel conferences and even masterclasses on November 19 and 22, with matchmaking services and awards. Land the big order or at least come away "married" and famous!

This is the final article of a three-part series on haptics. Haptics involves the use of technology to stimulate the sense of touch. IDTechEx have been covering the technology behind this important market sector for the last five years, and have just released their latest report: Haptics 2020-2030.

Within the field of 3D printing, there is increasing emphasis on functionality as the industry shifts away from the stereotype of rapid prototyping, and materials are not exempt from such scrutiny. For instance metals such as titanium with excellent tensile strength and low density are ideal for lightweighting applications, and as such demand for these materials is continually increasing. However, for certain applications, metals are not sufficiently lightweight enough, which is where composites come into play. The latest report from IDTechEx, "3D Printing Composites 2020-2030: Technology and Market Analysis", authored by Dr Bryony Core and Dr Richard Collins examines the key trends and innovations in this emerging technology.

The rapid penetration of electric vehicles has led to questions on its most expensive component - the battery. What happens to the batteries after 8-10 years of service when they retire from electric vehicles due to capacity fade?

The agenda has just been announced for the 16th annual Printed Electronics USA event taking place in Santa Clara, California, on November 20 & 21. This is the world's largest event on flexible, hybrid & printed electronics. Printed Electronics USA is part of the IDTechEx show, which brings together seven key disruptive technologies and their customers in one venue.

The conductive ink market is extremely diverse. This diversity has given this market long-term resilience, allowing it to sustain a growing application pipeline over multiple decades. Indeed, the industry has reinvented and rejuvenated itself multiple times as the application mix has been altered. Today, conductive inks find use in all manners of applications, as described in our report "Conductive Ink Markets 2019-2029: Forecasts, Technologies, Players."

This is the second of a three-part series of articles on haptics. Haptics involves the use of technology to stimulate the sense of touch. IDTechEx have been covering the technology behind this important market sector for the last five years, and have just released their latest report: Haptics 2020-2030. See more information on the IDTechEx website or contact research@IDTechEx.com.

IDTechEx's most recent report on the industry includes historic data and 10 year market forecasts for 48 different wearable technology product types, of which 20 are types of wearable medical device. These include more traditional medical products such as hearing aids, cardiac devices (e.g. Holter monitors or event monitors) and insulin pumps, but also newer devices such as continuous glucose monitors (CGM) for diabetics, other new electronic skin patches, and other emerging wearable medical device prospects. These products increased their combined annual revenue by $10bn a year in the period from 2010 to 2019, and make up around a third of all of the wearable device revenue in 2019.

IDTechEx will be hosting a free webinar on Wednesday 18 September 2019 titled New Advancements In 3D Printing Composites.

The IDTechEx Launchpad initiative is open to early-stage start-ups, universities, newly spun-out companies, research labs and government labs who can demonstrate a working prototype or product that highlights new advances in any of the related event topics of: electric vehicles, energy storage, graphene, internet of things, printed electronics, sensors, and wearable technology.

IDTechEx predicts 48V hybrid will peak at a huge 13 million cars made in 2027, 10-15% of the car market. This is something that those with legacy assets in internal combustion ignore at their peril. There is more, as revealed in the new IDTechEx report "48V Mild Hybrid and 48V Full Hybrid Vehicles 2020-2030".