Research Articles

Each year, the global deployment of 5G-enabled devices and infrastructure expands, with 98 nations having commercialized 5G or conducting 5G trials in 2022, up from 79 nations in 2021.

Roughly one year ago, Tesla announced that it would be dropping radar from Model 3 and Model Y production vehicles starting May 2022. At that time, IDTechEx wrote an article about why dropping radar was a mistake.

Having been largely confined to the realm of academia for many years, metamaterials are now set for commercialization in several major applications.

Thermal management continues to be a key topic for electric vehicle (EV) battery design. Early trends in the market largely revolved around the adoption of active cooling for the battery pack, and now this is the industry standard.

Collaborative robots, also commonly known as cobots, refer to robots that work side-by-side with human operators. Unlike industrial robots that are separated from human operators, cobots share the same working space as humans. As a relatively new definition, cooperative robots sound like collaborative robots but represents a different nature of the operation.

Thermal management is critical in several industries, and the trends in emerging technologies are driving material innovation. Electronics in markets from personal devices through to cars are seeing increased integration, densification, and hence an increased focus on thermal management.

Thursday 15 December 2022 - Discussion of the incentives and opportunities of embracing sustainable electronics manufacturing; Additive manufacturing approaches for printed circuit boards; Novel approaches to manufacturing integrated circuits; What are key players doing to improve sustainability?; Roadmaps for the adoption of sustainable materials and processes

How can advanced functional materials such as conductive inks be developed more quickly? Anyone who has spent time in a laboratory knows that material development can be a laborious process.

Elles ne sont peut-être pas encore omniprésentes, et les avantages qu'elles commencent à apporter au quotidien ne sont peut-être pas perceptibles, mais les technologies automatisées dans l'industrie automobile commencent à arriver à maturité. L'industrie des "robots-taxis" commence à voir davantage de petits déploiements commerciaux.

A new wave of electronics manufacturing is on the horizon, aiming to satisfy the increasing demand for sustainability and mitigate the impact of volatile energy prices. With the electronics industry accounting for 4% of global greenhouse gas emissions, it requires substantial innovation to reduce its environmental footprint.

It is becoming prosaic to say there is no 'silver bullet' for marine decarbonization. But it might be fitting to say 'multiple silver bullets' are emerging since between batteries, fuel cells (FC), green hydrogen, green ammonia, e-methane and carbon capture, decarbonization across all marine subsegments might just be possible.

Chemical recycling of plastic waste is gaining momentum. Headlines on investments, planned expansions, and real-world product launches are all accelerating in frequency and scale.

5G has two new frequency bands: sub-6 GHz (3.5 - 7 GHz) and mmWave (24 - 100 GHz). 5G sub-6 GHz, with a frequency relatively close to the 4G frequency range, is a popular choice because it finds a balance between providing excellent data throughput and being reasonably priced.

The market for service, collaborative, and mobile robots is expected to exceed US$90 billion by 2032. Robotics and automation have significantly revolutionized how people work and live across a number of industries

Catalysts are critical for the performance of proton exchange membrane (PEM) fuel cells. As the trend towards zero-emission vehicles continues, fuel cell electric vehicles (FCEVs) are projected to grow accordingly as a market sector.

Battery demand for stationary energy storage is set to grow in line with an increasing number of renewable energy resources being added to electricity grids globally, alongside pressure from governments and states to reach targets pertaining to renewable energy generation and energy storage.

A new wave of electronics manufacturing is on the horizon, driven forward by volatile energy prices and increasing demand for sustainability. With the electronics industry accounting for 4% of global greenhouse gas emissions, it requires substantial innovation to reduce its environmental footprint.

Every manufacturer has its own way of putting together an electric vehicle (EV) battery pack, and every manufacturer must consider the fire safety of its batteries

Lidar, which refers to light detection and ranging, is a technology that has been adopted in various applications such as mapping, surveying, military, archaeology, agriculture, geology, industry, etc.

Thursday 8 December 2022 - Introduction to electromagnetic metamaterials and key opportunities for the market; technology for electromagnetic metamaterials across various applications; review of the current state of the market for electromagnetic metamaterials; and much more!

With the continued global turmoil experienced over the past few years, the prices of almost everything are rising. This has been especially true for the rare earth materials used in the manufacturing of electric motors for electric vehicles (EVs).

Wednesday 7 December 2022 - This webinar will introduce some of IDTechEx's research into the following areas: The Li-ion market; Advanced battery technologies; Solid-state batteries; Stationary energy storage; and Green and blue hydrogen

Thursday 1 December 2022 - The value of wearable electronic skin patches in healthcare; Electronic skin patches 2022 roundup; Emerging applications of electronic skin patches; and Electronic skin patches outlook for 2023 and beyond

Charging electric buses has so far been done overnight in depots. However, if the daily operating range of the bus exceeds the real-world range that the driver is able to achieve, then local transit authorities are often left with two options.

Friday 2 December 2022 - How development in optics will help fuel the growth of XR devices for enterprise; How a rethink in product targeting is leading to the end of a troubled decade for consumer AR devices; and How growing adoption of face tracking, eye tracking, and more is marking the beginnings of more natural interactions between humans and machines

Thin film photovoltaics (PV) have historically played second fiddle, dwarfed by the multi-billion US dollar silicon PV industry. This may be about to change. Emerging PV applications, such as indoor energy harvesting and building integrated PV, have specific requirements that will enable thin film silicon alternatives to flourish.

A key requirement for every company in the polymer value chain is to develop and deliver a sustainability roadmap. The market drivers are becoming more significant, and industry activity is responding accordingly.

Recognized as one of the key technologies essential to achieving net-zero emissions targets, the momentum behind carbon capture, utilization, and storage (CCUS) deployment is building up.

The world of healthcare is undergoing significant change. The stress test of the pandemic, a growing global population, and increasing chronic disease prevalence is pushing care to be more efficient and robust.

Wednesday 30 November 2022 - Record Road Sales, Emerging Electric Motors & Hydrogen Fuel-cell Opportunities. Electric car markets in 2022: Europe, the US and China; The latest trends on EV componentry: power electronics and motors; Heavy-duty electric vehicle developments; and Opportunities for hydrogen fuel-cell adoption in transport

As the smartwatch market matures, the capabilities of alternative wearables continue to expand. In the coming years, alternative form factors could begin tempting consumers away. Not only could these devices provide more value - they also have the potential to access new biometrics.

The race to decarbonize on-road vehicles is undoubtedly being led by battery-electric powertrains. However, the superior energy density of fuel cell systems, when compared to today's Li-ion battery systems, means that they can deliver a greater range for the same system weight.

The world is on a quest for solutions to decarbonize its economy. More than 70 countries and over 1,200 companies have set a net-zero target, according to the United Nations. To limit warming to less than 2°C, emissions of hundreds of gigatonnes of carbon dioxide (CO₂) would need to be prevented and removed from the atmosphere.

As an important natural resource, water plays an irreplaceable role in people's daily life. Nowadays, water consumption in many regions is under "high stress". Many countries are already experiencing water scarcity, and it is expected that more countries will face a reduced availability of surface water resources by 2050.

IDTechEx's newly released report "Conductive Ink Markets 2023-2033" comprehensively explores this crucial material technology that underpins both photovoltaics and the emerging field of printed electronics.

With applications ranging from energy harvesting to sensing, and applicability to sectors being as varied as healthcare and automotive, printed/flexible electronics are set to change our expectations of what electronics can provide and where they can be utilized.