到2035年,全球固定式燃料电池的市场规模将增长到80亿美元以上

2025年-2035年固定式燃料电池市场:技术、参与者和预测

依据燃料电池类型、关键应用领域和运营模式划分的10年固定式燃料电池市场粒度预测。对技术市场、主要参与者和数据驱动基准进行批判性分析。


显示全部 说明 内容、图表列表 价格 Related Content
本报告深入评估了固定式燃料电池的市场格局、技术动态和参与者情况。通过对六大核心燃料电池类型、五大关键应用领域的详尽剖析,并结合2016年至2024年的历史数据,本报告对市场进行了全面回顾与深度展望。本报告的市场粒度预测涵盖39条独立预测路径,精确描绘了全球固定燃料电池市场的增长轨迹,预计至2035年,该市场规模将突破80亿美元大关。
本报告提供了关于固定式燃料电池市场的关键情报,按技术类型、主要参与者和主要应用进行细分。每个主要的固定电力应用领域都进行了深入分析,IDTechEx对每种燃料电池类型在市场部门中的适用性进行了独立评估。通过分析替代发电技术,本报告提供了整个固定式燃料电池市场的详细十年预测。报告内容包括:
 
燃料电池技术和主要市场参与者的深入审查
  • 质子交换膜燃料电池(PEMFC)、固体氧化物燃料电池(SOFC)、磷酸燃料电池(PAFC)、碱性燃料电池(AFC)、熔融碳酸盐燃料电池(MCFC)和直接甲醇燃料电池(DMFC)技术概述及新兴技术发展
  • 对每种燃料电池类型的关键分析和基准测试,按主要规格考虑因素细分
  • 按燃料电池技术对主要和新兴参与者的详细审查
 
固定式燃料电池使用的关键应用领域细分
  • 燃料电池各操作模式概述,包括连续发电、备用发电和峰值削减,并对每个领域的前景进行展望
  • 六大固定式燃料电池应用领域的细分,包括公用事业、工业、商业、数据中心与通信以及住宅发电,概述每个市场部门的规格要求
  • 评估每种燃料电池类型在各应用领域的适用性,包括详细案例研究回顾和技术基准测试
  • 对每个应用的前景评估以及对每种燃料电池类型预期趋势的分析
  • 概述竞争性固定发电技术及其对固定式燃料电池市场影响的分析
 
全面的市场分析
  • 各技术类型中固定式燃料电池市场参与者的回顾
  • 2025-2035年整体固定式燃料电池市场前景
  • 按燃料电池类型、应用领域和操作模式对固定式燃料电池市场预测进行细分
 
本报告涵盖的主要内容:
  • 执行摘要与结论
  • 主要固定式燃料电池技术
• 质子交换膜燃料电池(PEMFC)
• 固体氧化物燃料电池(SOFC)
• 磷酸燃料电池(PAFC)
• 碱性燃料电池(AFC)
• 熔融碳酸盐燃料电池(MCFC)
• 直接甲醇燃料电池(DMFC)
  • 燃料电池所用燃料
  • 关键参与者分析(25+简介)
  • 关键固定式发电应用
• 燃料电池操作模式
• 公用事业发电
• 工业发电
• 商业应用
• 数据中心与通信
• 住宅应用
  • 十年详细市场预测与前景
 
IDTechEx's latest report "Stationary Fuel Cell Markets 2025-2035: Technologies, Players & Forecasts" comprehensively covers the types of fuel cell technologies and the key specifications underpinning their emergence within the stationary power market. Benchmarking of the key fuel cell technologies, including proton exchange membrane fuel cells (PEMFCs), solid oxide fuel cells (SOFC), phosphoric acid fuel cells (PAFC), alkaline fuel cells (AFC), molten carbonate fuel cells (MCFC) and direct methanol fuel cells (DMFC), along with 25+ profiles of key market players, outlines the overall stationary fuel cell market. Segmentation of each of the six key stationary application areas, including utilities, industrial, commercial, data centres & telecoms and residential applications, is carried out alongside detailed analysis of the technological requirements, case studies and sector outlooks. Further breakdown of the market, including fuel cell operating modes, alternative power generation technologies, and the outlook of fuels used for fuel cells, helps to provide a clear status for the future stationary fuel cell market. The total stationary fuel cell market was valued at US$1.2 billion in 2023 and is forecast to exceed US$8 billion by 2035, representing a CAGR of 16.7%.
 
Outline of the major stationary fuel cell application areas and the current typical use cases by fuel cell type, with the key specification considerations for each application also listed.
 
Proton exchange membrane fuel cells are a promising back-up power technology
PEMFCs have received the greatest commercial attention, due to growing interest into their integration within automotive applications. However, a principal market for PEMFCs is within stationary power generation, particularly for back-up applications within data centres & telecoms and commercial buildings (hospitals, offices etc). PEMFCs operate using pure hydrogen fuel (>99.9%), combining this with oxygen to generate electricity, and water and heat as byproducts. Their low operating temperature (below 100°C), results in rapid start-up times, allowing a quick response to power demand changes.
 
With growing concern over global carbon dioxide emissions (CO2) and the expansion of the hydrogen economy, PEMFCs are well aligned for the replacement of diesel generators and the scale up of green power generation technology installations. Limitations due to their lack of fuel flexibility currently hinder widespread uptake, however, in this report, IDTechEx predicts the stationary PEMFC market to grow in line with the development of the hydrogen economy.
 
Solid oxide fuel cells set to leverage early adoption for long term success
The current state of the hydrogen economy is a limiting factor in the uptake of hydrogen fuel cells. Alternative technologies which can operate on multiple fuels are of interest. SOFCs are a high temperature alternative to PEMFCs. Operating at temperatures in excess of 650°C increases their tolerance to impurities and allows for the internal reforming of cheaper and readily available hydrogen carrier fuels, including natural gas and ammonia. The fuel cell exhaust can also be harnessed for combined heat and power operation, to provide heat to homes and buildings, increasing the overall cell efficiency to over 80%. Despite this, slow start-up times and high costs of thermally resistant materials have limited the overall uptake of SOFCs to predominately continuous power generation applications.
 
In this report, IDTechEx further outlines the key application areas for SOFCs, and the outlook for this technology. The wide availability of natural gas due to existing production and supply infrastructure, helps to drive current adoption of SOFCs. Consequently, SOFCs present a unique opportunity as a transition technology whilst the hydrogen economy develops, seeing near-term market adoption, and continued growth over the coming decade.
 
Alternative fuel cell technologies compete with PEMFC and SOFC front runners
PEMFCs and SOFCs have attracted the greatest market attention, however, alternative fuel cell technologies like AFCs, MCFCs, PAFCs and DMFCs still compete. The high temperature operation of MCFCs makes them a particular competitor to SOFCs. With a similar ability to operate on hydrogen carrier fuels via internal reforming, MCFCs can also be used for continuous high-power generation, operating with heat recovery. MCFCs require carbon dioxide (CO2) to operate, meaning they have been considered for carbon capture applications alongside power generation, particularly for the industrial sector, where an added value stream incentivizes market uptake.
 
Low temperature alternatives like AFCs and PAFCs have technological legacies dating back to the NASA space missions in the 1960s and with DMFCs a specification variation of PEM fuel cells. The acidic nature of PAFCs, however, has limited their market adoption, with original market players choosing to segue into the development of either PEMFCs or SOFCs. AFCs, like PEMFCs, can commence operation in a matter of seconds, leading to growth of uptake within the back-up power market. However, limited power densities and outputs compared to PEMFCs restrict their overall application scope. Similarly, DMFCs have been used for low power generation requirements, with their ability to operate using low cost and widely available methanol fuel helping to drive use cases. Limitations to their power densities, however, again hinder their uptake to low-power back-up applications, particularly for remote monitoring and telecoms. This report finds that DMFCs will be restricted to specific and niche use cases.
 
Lowering of capital expenditure will help drive widespread fuel cell uptake
Traditional power generation technologies like steam and gas turbines and diesel generators have low costs associated, helping to maintain their widespread market uptake, and fixed installation base. However, growing concerns over energy security and global decarbonization targets have placed greater strains on these technologies and sees companies begin to seek green power generation alternatives.
Key Aspects
 
This report provides critical intelligence on the stationary fuel cell market, segmented by technology type, key players and the major applications. Each of the main stationary power application areas are covered in depth, with IDTechEx providing an independent assessment of the suitability of each fuel cell type for the market sector. Analysis of alternative power generation technologies, helps to provide granular ten year forecasts of the entire stationary fuel cell market. This report includes:
 
An in-depth review of fuel cell technologies and major market players
  • Overview of proton exchange membrane fuel cells (PEMFC), solid oxide fuel cells (SOFC), phosphoric acid fuel cells (PAFC), alkaline fuel cells (AFC), molten carbonate fuel cells (MCFC) and direct methanol fuel cells (DMFC) technologies and emerging technological developments
  • Critical analysis and benchmarking of each of the fuel cell types, segmented by the main specification considerations
  • Detailed review of the major and emerging players by fuel cell technology
 
Breakdown of the key application areas for stationary fuel cell use
  • Overview of each of the operating modes of fuel cells, including continuous power generation, back-up power generation and peak shaving, and outlook for each area
  • Segmentation of the six main application areas for stationary fuel cells, including utilities, industrial, commercial, data centers & telecommunications and residential power generation, outlining the specification requirements for each market sector
  • Evaluation of the suitability of each fuel cell type for the application areas, including detailed case study review and technology benchmarking
  • Assessment of the outlook for each application and the trends expected for each fuel cell type
  • Outline of competing stationary power generation technologies and analysis of their impact to the stationary fuel cell market
 
Critical market analysis throughout
  • Reviews of stationary fuel cell market players throughout each technology type
  • Outlook of the overall stationary fuel cell market for 2025-2035
  • Segmentation of the stationary fuel cell market forecasts by fuel cell type, application area and operating mode
Report MetricsDetails
Historic Data2016 - 2024
CAGRThe global stationary fuel cell market is set to exceed US$8 billion by 2035, representing a CAGR of 16.7%.
Forecast Period2025 - 2035
Forecast UnitsMarket demand (MW), market value (USD$)
Segments CoveredFuel cell technology (PEMFC, SOFC, AFC, PAFC, MCFC, DMFC), Fuel cell application (Utilities, Industrial, Commercial, Data & Telecommunications, Residential), Operating mode (continuous power, back-up power)
从 IDTechEx 访问分析师
所有报告购买订单均包括与一名专家分析师进行 30 分钟的电话交谈,专家分析师将帮助您将报告中的重要发现与您正在处理的业务问题联系起来。这需要在购买报告后的三个月内使用。
更多信息
如果您对这一报告有任何疑问,请随时联系我们的报告团队 research@IDTechEx.com 或致电我们的销售经理:

AMERICAS (USA): +1 617 577 7890
ASIA (Japan): +81 3 3216 7209
ASIA (Korea): +82 10 3896 6219
EUROPE (UK) +44 1223 812300
Table of Contents
1.EXECUTIVE SUMMARY
1.1.Report introduction
1.2.What are fuel cells?
1.3.Types of fuel cells
1.4.Proton exchange membrane fuel cell (PEMFC) technology overview
1.5.Solid oxide fuel cell (SOFC) technology overview
1.6.Phosphoric acid fuel cell (PAFC) technology overview
1.7.Alkaline fuel cell (AFC) technology overview
1.8.Molten carbonate fuel cell (MCFC) technology overview
1.9.Direct methanol fuel cell (DMFC) technology overview
1.10.Benchmarking of stationary fuel cell technologies
1.11.Stationary fuel cell market overview
1.12.Global hydrogen policies driving decarbonization and the fuel cell market
1.13.The hydrogen economy and its impact on the fuel cell market
1.14.Alternative low carbon fuels for fuel cells
1.15.Types of stationary power generation - Operating modes
1.16.Stationary fuel cell applications
1.17.Overview of fuel cells used by application and key specification considerations
1.18.Fuel cells for utility power
1.19.Fuel cells for industrial applications
1.20.Fuel cells for commercial applications
1.21.Fuel cells for data centres and telecommunications
1.22.Residential fuel cells
1.23.Alternative power generation technologies
1.24.Fuel cell demand by technology type
1.25.Fuel cell market value by technology type
1.26.Outlook of the stationary fuel cell market
1.27.Access More With an IDTechEx Subscription
2.MARKET FORECASTS
2.1.Global stationary fuel cell demand (MW) - segmented by fuel cell type
2.2.Global stationary fuel cell market value (US$) - segmented by fuel cell type
2.3.Global stationary fuel cell demand (MW) - split by operating mode
2.4.Global PEMFC demand (MW) - segmented by application
2.5.Global SOFC demand (MW) - segmented by application
2.6.Global PAFC demand (MW) - segmented by application
2.7.Global AFC demand (MW) - segmented by application
2.8.Global MCFC demand (MW) - segmented by application
2.9.Global DMFC demand (MW) - segmented by application
3.INTRODUCTION
3.1.Report introduction
3.2.What are fuel cells?
3.3.NASA space shuttle missions and fuel cell development
3.4.Types of fuel cells
3.5.Stationary fuel cell applications
3.6.Overview of fuel cells used by application and key specification considerations
3.7.Combined heat and power
3.8.Global energy and renewable energy demand
3.9.Global hydrogen policies
3.10.The Korean Hydrogen Bidding Market
3.11.Carbon capture and fuel cells
4.FUELS FOR STATIONARY FUEL CELLS
4.1.Fuels for fuel cells
4.2.Desire for emission-free power
4.3.Low carbon fuels for fuel cells
4.4.Benchmarking volumetric energy densities of fuel cell fuels
4.5.Benchmarking carbon emissions of fuel cell fuels
4.6.Normalized benchmarking of fuel cell fuels
4.7.Cost of fuel versus energy density
4.8.The colours of hydrogen
4.9.Hydrogen electrolyzer systems for green hydrogen production
4.10.Ammonia fuel and the Haber Bosch process
4.11.Ammonia cracking technology
4.12.Methanol fuel and production
4.13.Overview of e-fuels
4.14.Liquefied natural gas fuel
5.FUEL CELL TECHNOLOGIES AND PLAYERS
5.1.1.What are fuel cells?
5.1.2.Comparison of fuel cell technologies
5.1.3.Comparison of fuel cell specifications continued
5.1.4.Benchmarking of fuel cells
5.2.Proton exchange membrane fuel cells
5.2.1.Overview of PEMFCs
5.2.2.PEMFCs operating principle
5.2.3.Major components for PEMFCs
5.2.4.Proton exchange membrane electrolyte - Nafion
5.2.5.Bipolar plates structure and assembly
5.2.6.Metallic vs carbon based BPPs
5.2.7.Gas diffusion layer purpose and structure
5.2.8.Cell catalysts
5.2.9.Catalytic poisoning
5.2.10.Water management in PEMFCs
5.2.11.PEMFC advantages and disadvantages
5.2.12.PEMFC technology conclusions
5.2.13.Latest research and development for PEMFCs
5.2.14.High temperature PEMFCs (HT-PEMFCs)
5.2.15.PFSA membrane developments
5.2.16.Bipolar plates developments
5.2.17.Electrocatalyst developments
5.2.18.Concerns with PFAS (including PFSA)
5.2.19.Introduction to PFAS
5.2.20.PFAS material concerns
5.2.21.PEMFC market players
5.2.22.Overview of the stationary PEMFC market
5.2.23.Acquisitions by major players
5.2.24.Overview of stationary PEMFC players in North American market
5.2.25.Overview of stationary PEMFC players in European market
5.2.26.Overview of stationary PEMFC players in Asia-Pacific market
5.2.27.Overview of PEMFC players within the mobility & transportation sector
5.2.28.Ballard Power Systems Overview
5.2.29.Ballard technologies
5.2.30.Ballard Power stationary fuel cell technology
5.2.31.Ballard Power global manufacturing capabilities and key partners
5.2.32.Ballard Power financials
5.2.33.Plug Power overview
5.2.34.Plug Power technology overview
5.2.35.Plug Power stationary power technology and fuelling
5.2.36.Plug Power customers
5.2.37.Plug Power financials
5.2.38.Plug Power revenue splits
5.2.39.PowerCell Group overview
5.2.40.PowerCell Group technologies
5.2.41.PowerCell Group partnerships and agreements
5.2.42.PowerCell Group financials
5.2.43.PowerCell Group financial analysis
5.2.44.Intelligent Energy overview
5.2.45.Intelligent Energy stationary power technology
5.2.46.Intelligent Energy partnerships
5.2.47.Toshiba overview
5.2.48.Toshiba fuel cell technology
5.2.49.Cummins overview
5.2.50.Accelera by Cummins fuel cell technology
5.2.51.SFC Energy overview
5.2.52.SFC Energy PEMFC technology
5.3.Solid oxide fuel cells
5.3.1.Overview of solid oxide fuel cells
5.3.2.SOFCs working principle
5.3.3.SOFC assembly and materials
5.3.4.SOFC electrolyte
5.3.5.Anode properties
5.3.6.Cathode properties
5.3.7.Interconnect for planar SOFCs
5.3.8.Tubular SOFCs
5.3.9.Polarization losses
5.3.10.SOFC technology variations
5.3.11.SOFC advantages and disadvantages
5.3.12.SOFC technology conclusions
5.3.13.Recent SOFC research and development
5.3.14.Low temperature SOFCs
5.3.15.Kyocera's cylinder-plate fuel electrode supports
5.3.16.Power generation from unused biomass resources
5.3.17.AMON Project
5.3.18.Integrated gasification fuel cells and carbon capture
5.3.19.SOFC market players
5.3.20.Overview of key SOFC players
5.3.21.Overview of players in the SOFC market - USA
5.3.22.Overview of players in the SOFC market - Europe
5.3.23.Overview of players in the SOFC market - APAC
5.3.24.Bloom Energy overview
5.3.25.Bloom Energy technology
5.3.26.Bloom Energy example customers
5.3.27.Bloom Energy example customers (2)
5.3.28.Bloom Energy installation base
5.3.29.Bloom Energy financials
5.3.30.Bloom Energy financial analysis
5.3.31.Bloom-SK Fuel Cell
5.3.32.Ceres Power overview
5.3.33.Ceres Power technology
5.3.34.Ceres Power financials
5.3.35.Ceres Power revenue splits
5.3.36.Ceres Power & Partners
5.3.37.Ceres Power & Bosch/Weichai
5.3.38.Ceres Power & Doosan
5.3.39.Ceres Power & Delta Electronics
5.3.40.Ceres Power & Miura
5.3.41.FuelCell Energy overview
5.3.42.FuelCell Energy SOFC technology
5.3.43.Mitsubishi Power overview
5.3.44.Mitsubishi Power technology
5.3.45.Players offering residential and off-grid SOFCs
5.3.46.Redox Power
5.3.47.OxEon Energy
5.3.48.OxEon Energy continued
5.3.49.Upstart Power
5.3.50.Aris Renewable Energy
5.3.51.Osaka Gas
5.3.52.Osaka Gas Ene-Farm
5.4.Phosphoric acid fuel cells
5.4.1.Overview of phosphoric acid fuel cells (PAFCs)
5.4.2.PAFCs working principle
5.4.3.PAFC assembly and materials
5.4.4.Electrolyte and matrix
5.4.5.Cathode materials and reaction
5.4.6.Anode materials and reaction
5.4.7.Cell catalyst development - electrode alloying
5.4.8.Bipolar plates developments
5.4.9.Cell performance and lifetime
5.4.10.Alternative FC developments using phosphoric acid - HT-PEMFCs
5.4.11.PAFC advantages and disadvantages
5.4.12.PAFC technology conclusions
5.4.13.PAFC market players
5.4.14.Overview of PAFC market technologies and players
5.4.15.PAFC technology benchmarking
5.4.16.Combined heat and power
5.4.17.Doosan Fuel Cell overview
5.4.18.HyAxiom overview
5.4.19.Doosan Fuel Cell and HyAxiom technology
5.4.20.Doosan and HyAxiom off-grid EV charging
5.4.21.Doosan Fuel Cell installation base
5.4.22.Doosan Fuel Cell financials
5.4.23.Doosan Fuel Cell and the Korean Hydrogen Bidding Market
5.4.24.Doosan Fuel Cell and HyAxiom global investments
5.4.25.Fuji Electric overview
5.4.26.Fuji Electric technology
5.4.27.Fuji Electric installation base
5.4.28.Fuji Electric historical case studies
5.5.Alkaline fuel cells
5.5.1.Alkaline fuel cell technology overview
5.5.2.AFCs working principle
5.5.3.Materials and structure
5.5.4.Stack assembly
5.5.5.Electrolyte type and configurations
5.5.6.Cathode catalysts
5.5.7.Anode catalysts
5.5.8.Gas diffusion electrodes
5.5.9.Cell degradation
5.5.10.AFC advantages and disadvantages
5.5.11.AFC technology conclusions
5.5.12.Anion exchange membrane fuel cells
5.5.13.Anion exchange membrane fuel cells (AEMFCs) - emerging alternative to AFCs
5.5.14.Working principle
5.5.15.Anion exchange membranes
5.5.16.Catalysts
5.5.17.AEMFC development summary
5.5.18.AFCs vs AEMFCs
5.5.19.AFC market players
5.5.20.Overview of AFC key players
5.5.21.GenCell overview
5.5.22.GenCell technologies
5.5.23.GenCell technology specifications
5.5.24.GenCell partners and customers
5.5.25.GenCell global installation and partnerships
5.5.26.GenCell's United States market focus
5.5.27.GenCell financials
5.5.28.AFC Energy overview
5.5.29.AFC Energy technology specifications
5.5.30.AFC Energy partnerships and customers
5.5.31.AFC Energy financials
5.5.32.AFC Energy operating activity
5.5.33.Historic players - Alkaline Fuel Cell Power
5.5.34.Alternative fuels for AFCs
5.5.35.Ammonia cracking and green ammonia synthesis
5.5.36.AFC fuel conversion technologies
5.6.Molten carbonate fuel cells
5.6.1.Molten carbonate fuel cell (MCFC) technology overview
5.6.2.Operating principles
5.6.3.Electrolyte
5.6.4.Cathode materials
5.6.5.Anode materials
5.6.6.Matrix materials
5.6.7.Material component summary
5.6.8.MCFC advantages and disadvantages
5.6.9.MCFC technology conclusions
5.6.10.MCFCs for carbon capture, utilization and storage (CCUS)
5.6.11.MCFC market players
5.6.12.FuelCell Energy Overview
5.6.13.FuelCell Energy technology specifications
5.6.14.FuelCell Energy - Tri-generation system
5.6.15.Carbon capture technology & FuelCell Energy
5.6.16.FuelCell Energy financials
5.6.17.FuelCell Energy revenue splits
5.6.18.FuelCell Energy and ExxonMobil (EMTEC) partnership
5.6.19.FuelCell Energy and Drax Group
5.6.20.FuelCell Energy in the South Korean market
5.6.21.Emerging player - EcoSpray
5.7.Direct methanol fuel cells
5.7.1.Direct methanol fuel cells overview
5.7.2.DMFCs working principle
5.7.3.Materials and structure
5.7.4.Electrolyte
5.7.5.Anode catalysts and reaction
5.7.6.Cathode catalysts
5.7.7.Operating conditions
5.7.8.Cell degradation
5.7.9.DMFC advantages and disadvantages
5.7.10.DMFC technology conclusions
5.7.11.DMFC market players
5.7.12.DMFC market landscape
5.7.13.SFC Energy overview
5.7.14.SFC Energy technology overview
5.7.15.SFC Energy - DMFC technology specifications
5.7.16.SFC Energy financials
5.7.17.SFC Energy revenue split by region
5.7.18.Ensol Systems and SFC Energy partnership
5.7.19.DMFC Corp overview
5.7.20.DMFC Corp products
5.7.21.Antig- Fuel Cell Innovation overview
5.7.22.Antig technology overview
5.7.23.Fujikura overview
6.ALTERNATIVE POWER GENERATION TECHNOLOGIES
6.1.Alternative technologies to stationary fuel cells
6.2.What is long duration energy storage?
6.3.Energy storage technology classification
6.4.Key energy storage technologies benchmarking with advantages and disadvantages
6.5.Longer duration Li-ion BESS projects on the rise
6.6.Hydrogen combustion engines overview
6.7.Hydrogen combustion engines for stationary power generation
6.8.Diesel generators overview
6.9.Global initiatives for the removal of diesel fuel and generators
6.10.Diesel generator market players
7.APPLICATIONS
7.1.1.Worldwide energy demand growth
7.1.2.Stationary fuel cell applications
7.1.3.Overview of the stationary fuel cell application market
7.1.4.Continuous power generation applications and requirements
7.1.5.Backup power generation applications and requirements
7.1.6.Peak shaving applications and requirements
7.2.Industrial
7.2.1.Overview of industrial applications
7.2.2.Industrial application considerations
7.2.3.Technology benchmarking for industrial applications
7.2.4.PEMFC industrial case studies
7.2.5.SOFC industrial case studies
7.2.6.PAFC industrial case studies
7.2.7.MCFC industrial case studies
7.2.8.Conclusions: Fuel cells for industrial power generation
7.3.Commercial
7.3.1.Overview of commercial applications
7.3.2.Commercial application technology considerations
7.3.3.Technology benchmarking for commercial applications
7.3.4.PEMFC commercial case studies
7.3.5.SOFC commercial case studies
7.3.6.PAFC commercial case studies
7.3.7.AFC small scale commercial case studies
7.3.8.Conclusions: Fuel cells for commercial power generation
7.4.Utilities
7.4.1.Overview of utilities applications
7.4.2.Utilities application considerations
7.4.3.Technology benchmarking for utilities
7.4.4.PEMFC utilities generation case studies
7.4.5.SOFC utilities case studies
7.4.6.PAFC utilities case studies
7.4.7.MCFC utilities case studies
7.4.8.AFC utilities case studies
7.4.9.Conclusions: Fuel cells for utilities power generation
7.5.Data centres & Telecommunications
7.5.1.Overview of data centres and telecommunication applications
7.5.2.Data centres power demand growth
7.5.3.Data centres and telecom application technology considerations
7.5.4.Technology benchmarking for data centres and telecommunications applications
7.5.5.PEMFC telecommunications case studies
7.5.6.PEMFC data centre case studies
7.5.7.SOFC data centre case studies
7.5.8.AFC telecommunications case studies
7.5.9.DMFC telecommunications case studies
7.5.10.DMFC telecommunications and remote monitoring case studies
7.5.11.Conclusions: Fuel cells for telecommunications and data centres
7.6.Residential
7.6.1.Overview of residential applications
7.6.2.Residential application technology considerations
7.6.3.Technology benchmarking for residential applications
7.6.4.Feed-in tariffs (FiT) and solar power incorporation
7.6.5.Comparison with residential batteries
7.6.6.Outlook for solid oxide fuel cells
7.6.7.Conclusions: Residential fuel cells
8.COMPANY PROFILES
8.1.AFC Energy
8.2.Alma Clean Power: Solid-Oxide Fuel Cells for Transport
8.3.Aris Renewable Energy
8.4.AVL: Solid Oxide Fuel Cells
8.5.Ballard Power Systems
8.6.Bloom Energy
8.7.Ceres (2024)
8.8.Ceres Power (2023)
8.9.Cummins: Solid Oxide Fuel Cells
8.10.Doosan Fuel Cell
8.11.Edge Autonomy
8.12.Elcogen
8.13.FuelCell Energy
8.14.Fuji Electric (PAFC)
8.15.GenCell Energy
8.16.Intelligent Energy
8.17.Nedstack
8.18.Osaka Gas: Solid Oxide Fuel Cell
8.19.OxEon Energy
8.20.Plug Power
8.21.PowerCell
8.22.Redox Power Systems
8.23.SFC Energy
8.24.SOLIDpower
8.25.Sunfire
8.26.Toshiba (Fuel Cell Business)
8.27.Upstart Power
 

Ordering Information

2025年-2035年固定式燃料电池市场:技术、参与者和预测

£$¥
电子版(1-5 名用户)
£5,650.00
电子版(6-10 名用户)
£8,050.00
电子版及 1 份硬拷贝文件(1-5 名用户)
£6,450.00
电子版及 1 份硬拷贝文件(6-10 名用户)
£8,850.00
电子版(1-5 名用户)
€6,400.00
电子版(6-10 名用户)
€9,100.00
电子版及 1 份硬拷贝文件(1-5 名用户)
€7,310.00
电子版及 1 份硬拷贝文件(6-10 名用户)
€10,010.00
电子版(1-5 名用户)
$7,000.00
电子版(6-10 名用户)
$10,000.00
电子版及 1 份硬拷贝文件(1-5 名用户)
$7,975.00
电子版及 1 份硬拷贝文件(6-10 名用户)
$10,975.00
电子版(1-5 名用户)
元50,000.00
电子版(6-10 名用户)
元72,000.00
电子版及 1 份硬拷贝文件(1-5 名用户)
元58,000.00
电子版及 1 份硬拷贝文件(6-10 名用户)
元80,000.00
电子版(1-5 名用户)
¥990,000
电子版(6-10 名用户)
¥1,406,000
电子版及 1 份硬拷贝文件(1-5 名用户)
¥1,140,000
电子版及 1 份硬拷贝文件(6-10 名用户)
¥1,556,000
Click here to enquire about additional licenses.
If you are a reseller/distributor please contact us before ordering.
お問合せ、見積および請求書が必要な方はm.murakoshi@idtechex.com までご連絡ください。

报告统计信息

幻灯片 363
Companies 27
预测 2035
已发表 Oct 2024
ISBN 9781835700655
 

预览内容

pdf Document Sample pages
 
 
 
 

Subscription Enquiry