| 1. | EXECUTIVE SUMMARY |
| 1.1. | Sensors for humanoid robots - market snapshot |
| 1.2. | Report scope and motivation |
| 1.3. | Analyst opinion: Sensors for humanoid robots |
| 1.4. | Humanoids - a brief technology and market primer |
| 1.5. | Humanoid forecasts and optimal market launch timing & entry points |
| 1.6. | Humanoid players by region: China expected to dominate early market while other regions are focusing on more selective deployments in the near term |
| 1.7. | Automotive players are leveraging existing expertise to enter the market, with growing pressure from humanoid-focused OEMs |
| 1.8. | Humanoid robots vs human labor: Cost and ROI analysis |
| 1.9. | Humanoid robots vs human labor: Economics and adoption inflection |
| 1.10. | Types of sensors deployed in a typical humanoid robot |
| 1.11. | Sensor technologies in humanoid robotics - detailed breakdown |
| 1.12. | Overlap with automotive sensor technologies |
| 1.13. | Perception sensors for humanoid robots |
| 1.14. | Technology principles of depth cameras used in humanoid robotics |
| 1.15. | Technology benchmark: Depth cameras for humanoid robots |
| 1.16. | Lidar deployments in humanoid robots - key takeaways |
| 1.17. | Summary of trade-offs between lidar and cameras |
| 1.18. | mmWave radar and ultrasonic sensors as secondary perception sensors |
| 1.19. | Benchmarking comparison of perception sensors for humanoid robots: Depth cameras, lidar, radar, and ultrasonic sensors |
| 1.20. | Key takeaways for perception sensors for humanoid robots |
| 1.21. | Overview of torque and force sensors used in humanoid robotics |
| 1.22. | Six-axis force-torque sensor technologies |
| 1.23. | Key takeaways for six-axis force-torque sensors in humanoid robots |
| 1.24. | Which key humanoid OEMs are integrating tactile sensors? |
| 1.25. | Benchmarking tactile sensors by technology |
| 1.26. | Key IMU suppliers for humanoid robots |
| 1.27. | Where are IMUs deployed in a humanoid robot? |
| 1.28. | Key Trends & IDTechEx outlook: Tactile Sensors & IMUs |
| 1.29. | Market landscape: Perception sensors for humanoid robots |
| 1.30. | Market landscape: Force-torque sensors, encoders, IMUs for humanoid robots |
| 1.31. | Market landscape: Tactile sensors for humanoid robots |
| 1.32. | Methodology |
| 1.33. | Average number of sensors per humanoid robot |
| 1.34. | Annual Volume of Sensors for Humanoid Robots, 2027-2037 |
| 1.35. | Annual Supplier Revenue by Sensor, 2027-2037 |
| 1.36. | Cost Breakdown by Sensor for Humanoid Robots, 2027 vs 2037 |
| 1.37. | Key takeaways from forecasting sensors for humanoid robots |
| 2. | INTRODUCTION |
| 2.1. | Overview of Trends in Humanoid Market and Regional Analysis |
| 2.1.1. | Humanoid players by region |
| 2.1.2. | Overview of key humanoid OEMs |
| 2.1.3. | From Prototype Demonstrations to Early Deployment in 2026: BYD and Tesla case study |
| 2.1.4. | IDTechEx predicts 2026 will be inflection point in the adoption of humanoids |
| 2.1.5. | Maturity of commercialization of humanoid robots by application |
| 2.1.6. | Surge in hype around humanoid technology in 2023 |
| 2.1.7. | Humanoid robotics commercialization pathway |
| 2.1.8. | Drivers for humanoid market growth |
| 2.1.9. | Challenges for the humanoid market |
| 2.2. | Overview of Sensors Used in Humanoid Robotics |
| 2.2.1. | Sensor categories in this report |
| 2.2.2. | Types of sensors deployed in a typical humanoid robot |
| 2.2.3. | Report content: Sensor technologies in humanoid robotics |
| 2.2.4. | Sensor technologies in humanoid robotics - detailed breakdown |
| 2.2.5. | Case Study: Sensors used in the Tesla Optimus |
| 2.2.6. | Introduction to sensors in robotics: Internal vs external data |
| 2.2.7. | Sensor fusion in humanoid robots |
| 2.2.8. | Overlap with automotive sensor technologies |
| 2.2.9. | Market landscape: Perception sensors for humanoid robots |
| 2.2.10. | Market landscape: Force-torque sensors, encoders, IMUs for humanoid robots |
| 2.2.11. | Market landscape: Tactile sensors for humanoid robots |
| 3. | MARKET FORECASTS |
| 3.1. | Methodology |
| 3.2. | Humanoid volume forecast |
| 3.3. | Average number of sensors per humanoid robot |
| 3.4. | Potential future trends in the number of sensors per humanoid robot |
| 3.5. | Annual volume of sensors for humanoid robots, 2027-2037 |
| 3.6. | Annual supplier revenue by sensor, 2027-2037 |
| 3.7. | Annual supplier revenue by sensing category, 2027-2037 |
| 3.8. | Cost breakdown by sensor for humanoid robots, 2027 vs 2037 |
| 3.9. | Key takeaways from forecasting sensors for humanoid robots |
| 4. | PERCEPTION SENSORS - DEPTH CAMERAS, LIDAR, RADAR, AND ULTRASONIC SENSORS |
| 4.1. | Introduction: Perception Sensors for Humanoid Robots |
| 4.1.1. | Chapter overview - Perception sensors for humanoid robots |
| 4.1.2. | Types of perception sensors in humanoids |
| 4.1.3. | IMUs and Simultaneous Localization and Mapping (SLAM) |
| 4.1.4. | Overlap with automotive perception sensor technologies |
| 4.1.5. | Cameras and lidars deployed by robot |
| 4.1.6. | Market landscape: Perception sensors for humanoid robots |
| 4.2. | Depth Cameras (3D Cameras) |
| 4.2.1. | Introduction to depth cameras for humanoid robots |
| 4.2.2. | Technology principles of depth cameras used in humanoid robotics |
| 4.2.3. | Company landscape: 3D cameras for humanoids |
| 4.2.4. | Orbbec - Depth cameras for robotics could overtake biometrics as their biggest market |
| 4.2.5. | StereoLabs - RGB passive stereo cameras for humanoids |
| 4.2.6. | RealSense - Active stereo NIR cameras for robots with various add-ons |
| 4.2.7. | Technology benchmark: Depth cameras for humanoids |
| 4.2.8. | SWOT: Depth (3D) cameras for humanoid robots |
| 4.3. | Lidar |
| 4.3.1. | Introduction to lidar in humanoid robots |
| 4.3.2. | Technical considerations for using lidar in humanoid robots |
| 4.3.3. | Introduction to lidar categories: Beam steering technology |
| 4.3.4. | Introduction to lidar categories: Solid-state vs mechanical |
| 4.3.5. | Introduction to lidar categories: Detection options |
| 4.3.6. | Overview of lidar beam steering technologies |
| 4.3.7. | Comparison of lidar beam steering technologies |
| 4.3.8. | Lidar deployments in humanoid robots and example products - table |
| 4.3.9. | Lidar deployments in humanoid robots - key takeaways |
| 4.3.10. | Why is there a need for lidar in humanoid robots? |
| 4.3.11. | Company overview: RoboSense |
| 4.3.12. | Company overview: Hesai Technology |
| 4.3.13. | Other relevant lidar players |
| 4.3.14. | Potential entrants: The wider lidar market by beam steering technology and wavelength |
| 4.3.15. | Summary of trade-offs between lidar and cameras |
| 4.3.16. | Outlook for lidar in humanoid robots |
| 4.3.17. | Component-level lidar cost breakdown |
| 4.3.18. | SWOT: Lidar for humanoid robots |
| 4.4. | mmWave Radar |
| 4.4.1. | Introduction to mmWave radar and ultrasonic sensors for humanoids - secondary perception sensors |
| 4.4.2. | mmWave radar market landscape |
| 4.4.3. | mmWave radar for humanoids |
| 4.4.4. | Promising advances for mmWave radar in humanoids, but current adoption is limited |
| 4.4.5. | SWOT: mmWave radar for humanoid robots |
| 4.5. | Ultrasonic Sensors |
| 4.5.1. | Ultrasonic sensors market landscape |
| 4.5.2. | Deployment of ultrasonic sensors in humanoid robots |
| 4.5.3. | Sonair - 3D ultrasonic sensor targeting human-robot safety |
| 4.5.4. | SWOT: Ultrasonic sensors for humanoid robots |
| 4.6. | Case Studies and Conclusions |
| 4.6.1. | Case Study: Unitree G1 with named lidar and depth camera |
| 4.6.2. | Case Study: Tesla's vision-only approach for both vehicles and humanoids |
| 4.6.3. | Case Study: UBTech's Walker series appears to opt for pure vision route |
| 4.6.4. | Case Study: UBTech's Walker X with multi-cameras and ultrasonic sensors |
| 4.6.5. | Case Study: Boston Dynamics - lidar, depth sensor and RGB camera |
| 4.6.6. | Benchmarking comparison of perception sensors for humanoid robots: Depth cameras, lidar, radar, and ultrasonic sensors |
| 4.6.7. | Benchmarking comparison of perception sensors for humanoid robots: Depth cameras, lidar, radar, and ultrasonic sensors |
| 4.6.8. | Summary of each type of perception sensor: Depth cameras, lidar, radar, and ultrasonic sensors |
| 4.6.9. | Key takeaways for perception sensors for humanoid robots |
| 5. | FORCE-TORQUE SENSORS AND ENCODERS (POSITION SENSORS) |
| 5.1. | Overview of Force and Torque Sensors in Humanoids |
| 5.1.1. | Introduction to force-torque sensors and encoders in humanoid robots |
| 5.1.2. | Overview of force-torque sensors deployed in humanoid robots |
| 5.1.3. | Linear force and torque sensors within actuators |
| 5.1.4. | The number of force and torque sensors varies with the DoF of a humanoid |
| 5.1.5. | Mapping the degrees of freedom in a typical humanoid |
| 5.1.6. | Force and torque sensor technologies: Case study - FUTEK |
| 5.2. | Encoders (Position Sensors) |
| 5.2.1. | Overview of encoders (position sensors) in humanoid robots |
| 5.2.2. | Encoder sensing technologies: Magnetic, optical, and inductive |
| 5.2.3. | Key players for encoders for humanoid robots |
| 5.3. | Six-Axis Force-Torque Sensors (6D Force Sensors) |
| 5.3.1. | Introduction to six-axis force-torque sensors |
| 5.3.2. | Six-axis force-torque sensor technologies |
| 5.3.3. | Company landscape: Six-axis force-torque sensors for humanoids |
| 5.3.4. | Key players: Six-axis force-torque sensors for humanoid robots (table) |
| 5.3.5. | Market leaders for six-axis force-torque sensors |
| 5.3.6. | Market opportunities for six-axis force/torque sensors are mostly limited to robotics |
| 5.3.7. | Incumbent six-axis force-torque sensors are precision instruments, not mass-manufacturable MEMS devices |
| 5.3.8. | Costs are falling as six-axis force-torque sensors move to mass-production |
| 5.3.9. | SWOT: Six-axis force-torque sensors (6D force sensors) |
| 5.3.10. | Key takeaways for six-axis force-torque sensors in humanoid robots |
| 6. | TACTILE SENSORS |
| 6.1. | Market Overview of Tactile Sensors in Humanoids |
| 6.1.1. | Overview of tactile sensors for humanoids |
| 6.1.2. | Tactile sensing in humanoid - 2026 state of the market |
| 6.1.3. | Tactile sensing seeing greater market penetration in the US than China? |
| 6.1.4. | Tactile Sensing Integration Considerations |
| 6.1.5. | Tactile sensing for humanoids - market map segmented by sensor technology type |
| 6.1.6. | Which key humanoid OEMs are integrating tactile sensors? |
| 6.1.7. | Multiple humanoid OEMs won't disclose the exact technology underpinning their tactile sensing functionality or be specific about use-cases |
| 6.2. | Tactile Sensing Technologies Breakdown |
| 6.2.1. | Introduction to tactile sensing technology opportunities |
| 6.3. | Tactile Sensing: MEMS and Semiconductor |
| 6.3.1. | MEMS based tactile sensing players: Overview and materials insights (1) |
| 6.3.2. | MEMS based tactile sensing players: Overview and materials insights (2) |
| 6.3.3. | Tactile Sensing with MEMS - OEM Case Study: Sanctuary.AI's Phoenix General Purpose Robots |
| 6.3.4. | Digid - MEMS nanosensor for pressure-temperature sensing in fingertips |
| 6.3.5. | Intouch robotics - semiconductor sensor modules for e-skins |
| 6.4. | Tactile Sensing: Capacitive sensors |
| 6.4.1. | Capacitive sensing precursor |
| 6.4.2. | Tesla suspected to be utilizing capacitive sensors |
| 6.4.3. | E-Skins for Humanoids: Neura Robotics |
| 6.4.4. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: Robotiq (1) |
| 6.4.5. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: Robotiq (2) |
| 6.4.6. | Aidin Robotics and Samsung Electronics |
| 6.4.7. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: PPS |
| 6.4.8. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: DIC Corp. |
| 6.5. | Tactile Sensing: Printed and/or Flexible Sensors |
| 6.5.1. | Introduction to the printed and flexible sensor market (1) |
| 6.5.2. | Printed and flexible can be synonymous but there are distinctions |
| 6.5.3. | Multifunctional hybrid sensors are greater than the sum of their parts |
| 6.5.4. | Market map of applications and players: Printed piezoresistive sensors |
| 6.5.5. | Tactile Sensing with Printed Sensors - OEM Case Study: Unitree uses Nexdor and Hanwei's tactile sensors |
| 6.5.6. | E-Skins for Humanoids: Hanson Robotics and Microfluidics |
| 6.5.7. | E-Skins for Humanoids: Kawasaki Robotics 'T-Skin' |
| 6.5.8. | B-Neo: Aiming for full-body tactile intelligence (1) |
| 6.5.9. | B-Neo: Aiming for full-body tactile intelligence (2) |
| 6.5.10. | SWOT Analysis: Printed and Flexible sensors for humanoid tactility |
| 6.5.11. | Printed sensors: Typical material and substrate requirements |
| 6.6. | Tactile Sensing: Optical and Vision |
| 6.6.1. | Tactile Sensing with Vision based Sensors - Supplier Case Study: Gelsight - Digit |
| 6.6.2. | Gelsight Approach: Monocular vision-based tactile sensing |
| 6.6.3. | Daimon Robotics - vision-based tactile sensing using dense colour patterns |
| 6.6.4. | Tactile Sensing with Optical Sensors - Supplier Case Study: Contactile |
| 6.7. | Tactile Sensing: Magnetic Sensors |
| 6.7.1. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Xela Robotics |
| 6.7.2. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Paxini (1) |
| 6.7.3. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Paxini (2) |
| 6.7.4. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Paxini (3) |
| 6.7.5. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Shadow Robot |
| 6.8. | Tactile Sensing in Humanoids: Benchmarking and Conclusions |
| 6.8.1. | Benchmarking tactile sensors by technology |
| 6.8.2. | Near-term opportunities in hands, higher volume opportunities in e-skins |
| 6.8.3. | Conclusions |
| 7. | INERTIAL MEASUREMENT UNITS (IMUS) |
| 7.1. | Introduction to IMUs |
| 7.1.1. | Overview of Inertial Measurement Units (IMUs) |
| 7.1.2. | Application grades of IMUs |
| 7.1.3. | IMU key applications |
| 7.2. | MEMS IMUs |
| 7.2.1. | MEMS IMUs - Key player introduction |
| 7.2.2. | Key IMU suppliers for humanoid robots |
| 7.2.3. | Where are IMUs deployed in a humanoid robot? |
| 7.2.4. | High-end IMU market - less suitable for commercial humanoids |
| 7.2.5. | Materials for MEMS IMUs: High level overview |
| 7.2.6. | MEMS novel accelerometers - commercial innovators |
| 7.2.7. | IMUs and Simultaneous Localization and Mapping (SLAM) |
| 7.2.8. | IMU (Inertial Measurement Unit) - material considerations and conclusions |
| 8. | COMPANY PROFILES |
| 8.1. | AgiBot |
| 8.2. | Agility Robotics |
| 8.3. | Bayflex Solutions |
| 8.4. | Booster Robotics |
| 8.5. | Covestro |
| 8.6. | Digid GmbH |
| 8.7. | FUTEK |
| 8.8. | Hesai Technology |
| 8.9. | NanoSen |
| 8.10. | Orbbec |
| 8.11. | Pasinic Perception Technology |
| 8.12. | Photron |
| 8.13. | Quantum Technology Supersensors |
| 8.14. | Realbotix |
| 8.15. | RealSense |
| 8.16. | RoboSense |
| 8.17. | Samsung |
| 8.18. | Sanctuary AI |
| 8.19. | Schaeffler |
| 8.20. | Sharpa Robotics |
| 8.21. | Sonair |
| 8.22. | StereoLabs |
| 8.23. | Unitree Robotics |
| 8.24. | Unitree Robotics: Humanoid Robotics |
| 9. | APPENDIX |
| 9.1. | Methodology: Cost and ROI Modeling for Humanoid Robots (1) |
| 9.2. | Methodology: Cost and ROI Modeling for Humanoid Robots (2) |