Electric vehicle range extenders: leaving piston engines behind
Aug 09, 2013
This article shares some of the research in the new IDTechEx report, "Range Extenders for Electric Vehicles Land, Water & Air 2013-2023" (www.IDTechEx.com/range) which covers all such vehicles, on land, on/under water and airborne. Hybrid versions of electric vehicles are the successful part of the electric car business, outselling pure electric versions by at least six to one. Hybrids are soon to be a major part of the electric aircraft and boat businesses and in the form of off-road vehicles; notably now outdoor forklifts but also mining and agricultural vehicles.
Those successful hybrids are mainly in the simplest form that does not offer a plug in option and requires no change in driver behaviour. Increasingly, they are series hybrids where the conventional piston engine never drives the wheels: it simply charges the battery. These engines are known as range extenders because they extend the range beyond what would be affordable with batteries alone. They are smaller than the piston engines used in conventional vehicles and are simplified in some respects, sometimes even able to be mounted sideways and lacking an oil pump, but these remain incremental improvements. Something better is needed to match the radical changes elsewhere in hybrids, such as the replacement of the traction battery with a supercapacitor in the Toyota hybrid Formula One car and the MAN hybrid city bus. What is a radically improved range extender? One answer is the fuel cell, as in the Riversimple fuel cell car with its supercapacitor in place of a traction battery. However, fuel cells are not a complete answer due to issues such as cost, reliability and lack of hydrogen infrastructure.
Range extenders sit in a complex and rapidly evolving power environment but they are usually designed to operate at near constant load and torque for optimal efficiency and life. Range extender power may therefore be on demand at all times or most of the time, whereas the battery also experiences fast charging which is on demand when stationary and now energy harvesting power that is intermittent. Energy harvesting includes photovoltaics and regenerative braking on land, the propeller going backwards in regenerative soaring and landing of aircraft, and also regenerative mooring of a boat in a tidestream. The power electronics to interface all this becomes more complex.
Something more radical is needed: rotary engines
Something more radical is needed if the full potential of hybrids is to be realised. Ideally, we need quieter, smaller, lower cost, more reliable and multi-fuel versions that do not vibrate. Motors that inherently generate electricity called "fuel generators" are even more elegant, the fuel cell being one of these.
Rotary engine technology is beginning to realise most of the desired improvements. Following the success of small Wankel engines in Unmanned Aerial Vehicles (UAVs) that are not electric, a manned Diamond aircraft flew in Germany with a rotary range extender from its investment Austro Engine in Austria.
Innovation in rotary engines is proceeding rapidly. In January 2013 the engine AE80R performed on the Austro Engine test bench. As a final target it will have a weight of 27 kg with an output of 80 hp (58 kw).
Compared to the AE50R (55 PS Austro Engine rotary engine) the new engine has no loss lubrication system anymore which results in an extremely low oil consumption. A dual FADEC (Full Authority Digital Engine Control) controlled fuel injection system will keep fuel consumption on the lowest possible level. The engine is designed to power small manned or unmanned aircraft.
According to Christian Dries, Chairman and Owner Diamond Aircraft, the AE80R might have the potential to become one of the leaders in the extremely weight sensitive market of LSA (Light Sport Aircraft) and ultra-light aircraft. "The engine has no vibration and therefore it is ideal to power UAVs (Unmanned Aerial Vehicles) with highly sensitive equipment" he added.
LiquidPiston in the USA develops engines which are said to be two to three times more fuel efficient than today's engines, as well as five to ten times lighter, quieter, more powerful, and multi-fuel capable - including diesel, JP8, gasoline and natural gas. In July 2013, Connecticut, US-based advanced internal combustion engine developer LiquidPiston closed a $6.5m Series C venture funding round. The round was led by intellectual property-focused investor Northwater Capital Management and technology venture capital firm Adams Capital Management.
LiquidPiston's founder and CTO Nikolay Shkolnik said, "We are thrilled to have raised an additional $6.5m for LiquidPiston."
"Our X engine represents major breakthroughs for internal combustion engines. We have demonstrated a lightweight, compact, fuel-efficient, quiet, multi-fuel capable rotary prototype engine that is scalable from less than 1 to over 1000 HP. We look forward to working with industry partners to further develop this engine for specific market applications that value high power-density, fuel-efficiency, low-noise, and low-vibration."
Lead investor, Northwater Capital Management's CEO, David Patterson said, "Northwater Capital is extremely proud to continue our investment in LiquidPiston to enable rapid industry adoption of the company's game-changing engine technology."
There is even a fuel generator version being developed by Clarian Laboratories in the USA, basically a rotary engine incorporating coils and magnets, which inherently generates electricity with no need for a rotating shaft to a generator. It started as a four-cycle, 125cc rotary generator with 5kW output in 10 kg self-contained package. It is compact, lightweight and has only two moving parts, making it reliable, safe, and easy-to-maintain but there has been little news on this since the main announcements in 2011.
Many other forms of range extender
Many other forms of range extender are being developed and there will be a place for many of them in the marketplace given the breadth of requirement. The new IDTechEx research report, "Range Extenders for Electric Vehicles Land, Water & Air 2013-2023" (www.IDTechEx.com/range) profiles 29 developers and manufacturers of them and 37 integrators.
For example, in aircraft reliability and power- to-weight ratio are paramount whereas, in cars, cost is one of the most critical factors, ruggedness coming to the fore in mining, earthmoving, material handling and agricultural vehicles. The Bladon Jets mini turbine in the UK is at the main part of the potential market in power output requirement - 20 to 70kW - and it is being offered first as a replacement for diesel generators on buildings in the developing nations. When it has economy of scale at the 100,000 units a year level, the mini jet will be offered as a low vibration, exceptionally reliable, multi-fuel range extender for electric vehicles, particularly suitable for aircraft but more easily introduced to cars and other land vehicles that have less onerous regulations. Give that five years. Will it find a place in the $66 billion global market for range extenders, mostly for car-sized vehicles followed by larger land vehicles? Time will tell.
New Report by IDTechEx
Range Extenders for Electric Vehicles Land, Water & Air 2013-2023 (www.IDTechEx.com/range) profiles key developers, manufactures and integrators of range extenders for land, water and airborne electric vehicles. It gives ten year forecasts of the different types of electric vehicle and of range extenders by number, unit value and market value. Market drivers and the changing requirements for power output are analysed. Will shaftless range extenders with no separate electricity generator take over and when will that be? What fuels will be used and when? What are the pros and cons of each option and who are the leaders? It is all here.
IDTechEx guides your strategic business decisions through its Research and Events services, helping you profit from emerging technologies. We provide independent research, business intelligence and advice to companies across the value chain based on our core research activities and methodologies providing data sought by business leaders, strategists and emerging technology scouts to aid their business decisions. To discuss your needs please contact us on research@IDTechEx.com or see www.IDTechEx.com .
IDTechEx Research Subscriptions
Subscription services allow you to access a wide range of our technology and market research on a given topic or across topics, providing you with unlimited access to new related content throughout the subscription period at tremendous value. See www.IDTechEx.com/subscriptions.