Mr Mario Kohl, Project Manager
Europe 2016 Presentation - Fraunhofer IFAM*
Europe 2016 Audio Presentation - Fraunhofer IFAM*
If you already have access, please [Login]
Access is available via an IDTechEx Market Intelligence Subscription
For integrating temperature sensors on surfaces and into composites, printing allows a high flexibility in view of design and manufacturing. In addition to noble metals, in special, Cu-CuNi- (type T) as well as Ni-NiCr- (type K) couples are standard materials for thermocouples and are therefore interesting materials also for printing purposes.
Due to the high oxidation tendency of Cu-based materials and the high sintering behaviour of Ni / NiCr, composites of metallic alloys in a polymer matrix can be an interesting approach to print temperature sensors on temperature sensitive surfaces. In this paper we report on screen-printing and sintering behaviour of CuNi- and NiCr alloys as well as CuNi- and NiCr-polymer composites for temperature sensor applications. Screen printing has been used to print temperature sensors on different substrates, including glass, ceramics, polymer films and metals. Resulting sensor structures show good adhesion on different surfaces after sintering of metals or curing of polymer composites, respectively. Sintering of alloy structures above 750°C as well as curing of alloy composites below 400°C result in thermocouples. Results will be discussed in view of printing processes, post-treatment as well as reliability and reproducibility of temperature sensors, respectively.
Speaker Biography (Mario Kohl)
Dipl.-Ing. Mario Kohl received a degree in Production Engineering with a main focus on material sciences from the University of Bremen in 2008. After that he started working as a project manager in the department "Functional Printing" at the Fraunhofer IFAM in Bremen. Main research interests are thick-film technology with focus on sensor application and surface modification.
Company Profile (Fraunhofer IFAM)
View Fraunhofer IFAM Timeline
Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM carries out applied research and development along the entire value chain.
The Functional Printing group has many years of experience in this area, with focus being on nanocomposites, nanostructured functional materials, printed electronics, and sensor systems. In addition, solutions for energy harvesting and 3D-integration are being developed. Regarding functionality integration, our interdisciplinary team works closely with customers to develop concepts, materials, and production processes. For the realization of functionality integration in production, various technologies are available such as 3D-printing, inkjet printing, aerosol printing as well as sputtering, compounding, and extruding techniques.