Research Articles

IDTechEx calculated that this industry received over $100m in investment in 2019. There are very good reasons for both the composite and 3D printing industry to be excited.

Global Production of Electric Light Commercial Vehicles to Exceed 2.4 Million Units Annually by 2030 Forecasts IDTechEx. The light commercial vehicle market is at the dawn of a revolution; the future is electric.

2030 will be the global 'tipping point' for sustainable mobility in the world's largest cities, according to Kantar's Mobility Futures study, confirming the IDTechEx study just before. Kantar predicts private car journeys in the world's largest cities decreasing 10% by 2030 due to the sharing economy, multi-modality, autonomous vehicles and ageing population.

IDTechEx attended AutoSens 2019 in Brussels. The event took place at the car museum in Brussels. This event is focused on all future vehicle perception technologies including lidar, radar, and camera. It focuses on the hardware side as well as on the software and data processing side.

Masterclasses are the ideal way to train staff on emerging technologies. Bracketing the IDTechEx show in Berlin, the IDTechEx masterclasses on 12th and 15th May 2020 will contain the latest insights and analysis on their chosen topics.

Healthcare Sensor Innovations 2020, hosted in San Jose on March 17-18, identifies and assesses the opportunities for printed and flexible electronics in healthcare as the technology enables a new wave of medical wearable devices.

In-Mold Electronics (IME) will one day become a well-established process with a well-developed ecosystem and a mature, easy-to-use design-to-product workflow. This process will become the basis of many novel structural electronic designs and products.

Healthcare Sensor Innovations North America debut on Marc, 17-18, 2020 in San Jose, USA will focus on the latest developments in the use of wearables and sensors in point of care diagnostics and continuous monitoring.

Some of the biggest hurdles to widespread adoption of electric vehicles are range anxiety, battery longevity and safety. As the electric vehicle market grows and for it to reach its full potential, there is an increased need for effective thermal management of the vehicles.

Memphis Meats a leading start-up in the race to develop cultured meat products, recently announced that it had closed a $161 million funding round. IDTechEx Analyst Dr Michael Dent discusses what this means for the commercialisation of the cultured meat industry.

In 2020 the market for conductive inks will be $2.4Bn, according to extensive research by IDTechEx. Of that, 95% of the conductive ink supply by value goes into just three applications. However, for years now there has been work on a myriad of new applications for conductive ink, in this article we assess some of those opportunities.

IDTechEx will be hosting a free webinar on Thursday 27 February 2020 titled Electric Trucks: An Impending Revolution?

Graphene is on the cusp of significant market growth; the opportunities are exciting and diverse, each with significant potential. Graphene and 2D Materials Europe 2020 (13-14 May, Berlin) is the largest B2B event on the topic with a dedicated focus on the commercial frontiers. www.GrapheneEurope.tech

Attendees at Healthcare Sensor Innovations USA 2020 will hear from industry representatives on how the next wave of connected and wearable medical devices will bring increased benefits to patients, healthcare providers, insurers, and the pharmaceutical industry.

Vehicles for construction, agriculture and mining CAM have become one industry served by giants such as Caterpillar, CNH Industrial, John Deere and Komatsu but also small businesses making the new requirements such as drone systems and weeding and mine survey robots.

The current outbreak of a novel coronavirus (2019-nCoV) has hit China in the past month and spread to 25 nations. Early detection and diagnosis are essential to reduce the prevalence of infectious diseases and to prevent them from becoming epidemic or even pandemic.

The rise of electric vehicles is creating many new material opportunities. One such material class is the die attach material used in power electronics.

Since their accelerated growth began in 2015, 2019 saw two of the top three regions selling electric cars plateau as a short-term transition from 'carrot' to 'stick' unfolds. In China, serious subsidy phase-outs, amid relaxing of internal combustion engine bans (to stimulate overall car sales), are to blame. Similarly, growth in the US has been underpinned by Tesla, whose tax credits were slashed mid-year as quotas were reached.

IDTechEx will be hosting a free webinar on Wednesday 12 February 2020 titled XR: What is XR, and where is it going?

What does it take to commercialize photonic beam steering?

Cardiovascular disease (CVD) must be better managed for patient care to improve. The protocols for monitoring patients are rapidly evolving. Historically, patients who fall ill are required to travel in order to visit a general practitioner or hospital. This procedure may soon become a thing of the past.

IDTechEx attended AutoSens 2019, the event took place at the car museum in Brussels. This event is focused on all future vehicle perception technologies, including lidar, radar, and camera. In this article, we summarized key learnings around lidar technologies.

In this article, IDTechEx highlight the trends, challenges, and innovation opportunities, shedding light on the likely technology roadmap towards QLED.

Understanding the future of the Li-ion supply chain requires clarity on the technologies and chemistries that will be used over the coming decade.

IDTechEx will be hosting a free webinar on Wednesday 5 February 2020 titled Plant-Based and Cultured Meat: The Future of Meat Alternatives.

Electric vehicles by land, water and air are rapidly arriving and rapidly being misunderstood. Motors last forever? No. We now push motors so hard they wear out, increasing sales.

There is dramatic change in some industries, with leading printed electronics vendors moving quickly to capitalize on the new sought after capabilities. These opportunities will be addressed at the Printed Electronics Europe exhibition and conference in Berlin on 13 - 14 May (register by 23 January to save 40%).

Here come previously impossible devices and structures. The new IDTechEx report, "Smart Material Opportunities in Structural Electronics 2020-2030" analyses and forecasts a remarkable $200 billion materials opportunity by making dumb structures smart.

IDTechEx will be hosting a free webinar on Thursday 23 January 2020 titled Electric Vehicle Motor Manufacturers: Which to Buy, Employ, Avoid.

Diagnosing CVD is the first step in patients' road to recovery. It is imperative to detect the disease early in order to administer treatment while it is still treatable. In addition, preventing the disease altogether is becoming more important in healthcare. The main approaches for detecting CVD are currently in vitro diagnostics (IVD) at point-of-care (POC) and the use artificial intelligence (AI) in cardiovascular imaging.

IDTechEx Technology Analyst Dr David Wyatt has recently published a report update "Electric Truck 2020-2030", focusing on electrification in the medium and heavy-duty truck markets, providing a comprehensive set of market forecasts.

Recycling waste plastics is essential to creating a circular economy. Current recycling methods are hampered by issues such as societal perceptions of recycling, to economic barriers and technological; however, over the past few years the number of technical innovations to improve polymer recycling have substantially increased.

IDTechEx has issued the first in-depth report on this called, "Robot Shuttles and Autonomous Buses 2020-2040". Robot shuttles are an important new, reconfigurable form of transportation for goods and people that may even function as mobile offices, workshops, restaurants and more.

New IDTechEx report on AR, VR and MR products by Technology Analyst Dr. Charlotte Coles discusses the technology, market, and players of the past, present and future. XR, or extended reality, products are at the forefront of technological change. Virtual reality, Augmented Reality and Mixed Reality. With so many different XR products now available for a variety of use cases, it is important to understand how the different technologies are used, and companies which create them.

Last mile delivery is the most expensive part of the delivery chain, often representing more than 50% of the overall cost. This is mainly because it is the least productive and automated step. As such, many are seeking to bring automation into the last mile.

Few of the giant car makers have shown urgency in transitioning away from the internal combustion engine. What's more, the automotive market is set to decline once again in 2019 whilst electrifying newcomers made huge gains in front of sleeping incumbents' noses. Although a large fraction of this is orders (not deliveries), if OEMs do not wake up now, they never will.