Full profile interview
3 Oct 2022

Our Next Energy (ONE)
Our Next Energy are a US start-up developing advanced battery technology for electric vehicles. IDTechEx spoke with them (Samuel Haberl, Technical Product Manager) at the Battery Show North America 2022.
30 Sep 2022

Guinness World Record for Fastest 100 Metres by a Bipedal Robot
Cassie the robot has established a Guinness World Record for the fastest 100 meters by a bipedal robot. Cassie clocked the historic time of 24.73 seconds starting from a standing position and returning to that position after the sprint, with no falls.
28 Sep 2022

Battery Free, Wireless Underwater Camera
Scientists estimate that more than 95 percent of Earth's oceans have never been observed, which means we have seen less of our planet's ocean than we have the far side of the moon or the surface of Mars. The high cost of powering an underwater camera for a long time, by tethering it to a research vessel or sending a ship to recharge its batteries, is a steep challenge preventing widespread undersea exploration. Now researchers have taken a major step to overcome this problem by developing a battery-free, wireless underwater camera that is about 100,000 times more energy-efficient than other undersea cameras. The device takes color photos, even in dark underwater environments, and transmits image data wirelessly through the water.
Background
1 Sep 2022

Torc: An Autonomous Technology Company in Roboshuttles and Trucks
Torc has a history in robotics and autonomous technology development. It has worked on autonomous roboshuttles and autonomous trucks.
31 Aug 2022

License Extension Granted to Bourne Tidal Test Site
The Marine Renewable Energy Collaborative of New England announced that the US Army Corps of Engineers has renewed its license for the Bourne Tidal Test Site, allowing them to conduct an extended test, starting in October, of a new tidal energy technology developed by Littoral Power Systems.
31 Aug 2022

Hydrogen Fuel Cell Powered Autonomous Underwater Vehicle
The missions demonstrated the remarkable autonomous launch of a micro-AUV from Solus-LR while submerged and underway. Following the launch, the micro-AUV surfaced and transmitted a status message to Solus-LR's command and control center via Iridium satellite. The operation was the first of its kind and demonstrated near real-time, over-the-horizon communications from a submerged AUV.
11 Aug 2022

The World's First Rechargeable, Safe, Electric Fuel
Researchers have created a new type of flow battery that is predicated upon a composite material that they invented, which is a nanofluid where the nanoparticles are battery-active materials, that they called nanoelectrofuel.
9 Aug 2022

New York Electric Vehicle Charging Pilot
This project forms part of the DOT Studio - a collaboration between the New York City Department of Transportation and Newlab, focused on applying emerging technologies to advance planning, policy, operations, and real-time management of transportation across New York City in line with the City's Vision Zero and sustainability goals.
9 Aug 2022

Wearable to Detect Allergens, Fire Accelerants, Chemical Markers
A researcher is creating a portable, wearable device for rapid gas analysis that could detect illness immediately. Advancements in micro-gas chromatography in the past 20 years have demonstrated great potential for the development of powerful portable gas analysis devices. But it remains a challenge to achieve efficient separation and rapid detection for effective gas analysis in a highly integrated and cost-effective platform, as well as in a mobile device.
4 Aug 2022

Surgical Robot Readies for Space Station Test
A miniaturized robot is on scheduled to blast off into space to showcase its skills. NASA recently awarded the University of Nebraska-Lincoln $100,000 through the Established Program to Stimulate Competitive Research to ready the surgical robot for a 2024 test mission aboard the International Space Station.
2 Aug 2022

Stickers That Can See Inside the Body
New stamp-sized ultrasound adhesives produce clear images of heart, lungs, and other internal organs.
Full profile interview
1 Aug 2022

Equivital
Equivital provides wearable technology and other solutions to monitor vital signs, particularly heat stress for industrial and medical markets including emergency response and clinical trials/remote patient monitoring. Tess Skyrme, Technology Analyst at IDTechEx, interviewed Marketing Manager Sally Maclachlan.
Full profile interview
27 Jul 2022

HEVO
HEVO is a Brooklyn-based company that offers wireless charging hardware and software for EVs. They are also the commercialisation partner for the U.S. Department of Energy's Oakridge National Lab's high power wireless charging solutions. IDTechEx liaised with their founder and learnt about their product portfolio and commercialisation strategy.
26 Jul 2022

Drop by Drop: MXene in Complex 3D Device Architectures
Despite being only a few atoms thick, MXene packs a powerful punch. This class of single layer, two-dimensional nanomaterials exhibits desirable properties like excellent thermal and electrical conductivity, heat resistance and high specific surface area. These characteristics promise to revolutionize high-performance electronic devices and energy storage systems.
External press release
26 Jul 2022

Velo3D Partners with Hartech Group
The partnership makes Hartech Group a preferred distributor for the federal government for Velo3D. Together, the companies will deliver full-service project execution for the sale, installation, and onboarding of Velo3D's advanced metal additive manufacturing solution.
Full profile interview
21 Jul 2022

Remedee Labs
Remedee labs is developing a wearable endorphin stimulator using mm-wave frequencies for a drug-free solution to pain. Tess Skyrme, Technology Analyst at IDTechEx, chaired a panel on wearables at the CEA-Leti conference on healthcare innovations in June 2022 alongside co-founder Jacques Husser who shared the latest updates from the company.
External press release
19 Jul 2022

Xerox Elem Additive and US Navy Deploy First Metal 3D Printer at Sea
Xerox Elem Additive Solutions today announced that an ElemX liquid metal printer was recently installed on board USS Essex (LHD 2), making it the first metal additive manufacturing machine deployed on a US Naval vessel.
Update interview
1 Jul 2022

Ultramins
Ultramins is a Dutch company producing ultrasonic transmitters for irrigation water purification. IDTechEx spoke with the company at the GreenTech 2022 event.