TyroMotion GmbH (AT)

High-Tech Vest Monitors Lung Function

Patients with severe respiratory or lung diseases require intensive treatment and their lung function needs to be monitored on a continuous basis. Researchers have developed a technology whereby noises in the lungs are recorded using a textile vest with integrated acoustic sensors. The signals are then converted and displayed visually using software. In this way, patients outside of intensive care units can still be monitored continuously. The technology increases the options for diagnosis and improves the patient's quality of life.

The World's First Rechargeable, Safe, Electric Fuel

Researchers have created a new type of flow battery that is predicated upon a composite material that they invented, which is a nanofluid where the nanoparticles are battery-active materials, that they called nanoelectrofuel.

Emberion: Cameras With Extended Spectral Band

Originally a spinoff from Nokia, Emberion was co-founded in 2016 by its employees and Verso Capital, a Finnish venture capital company. The company provides cameras with extended wavelength range as solutions to professional imaging and detection.

Holst Centre (Impulse Printing)

Impulse printing is a new non-contact printing methodology that uses a heat pulse to expel ink. It has been developed by Holst Centre, and is targeting 3D electronics and advanced packaging. IDTechEx was shown a demonstration in person at the Flex 2022 conference.

Robotic Motion in Curved Spaces Defies Standard Laws of Physics

When humans, animals, and machines move throughout the world, they always push against something, whether it's the ground, air, or water. Until recently, physicists believed this to be a constant, following the law of conservation momentum. Now, researchers have proven the opposite - when bodies exist in curved spaces, it turns out that they can in fact move without pushing against something.

A Simple, Cheap Material for Carbon Capture, Perhaps from Tailpipes

Carbon dioxide is the main greenhouse gas warming Earth and is emitted in large quantities in the flue gas from industrial and power plants. A new method for removing CO2 from these flue gases involves piping the emissions through a porous material based on the chemical melamine. DETA, a chemical bound inside the porous melamine, grabs CO2 and removes it from the gas, with nitrogen vented to the atmosphere.

Philippines to Develop up to 3GW Wind Power

The Philippines' bid to increase the share of renewable energy received a boost following the awarding of a grant by the US government to a local firm to develop up to three-gigawatt wind power capacity.

Using Artificial Intelligence to Control Digital Manufacturing

Scientists and engineers are constantly developing new materials with unique properties that can be used for 3D printing, but figuring out how to print with these materials can be a complex, costly conundrum. Researchers have now used artificial intelligence to streamline this procedure. They developed a machine-learning system that uses computer vision to watch the manufacturing process and then correct errors in how it handles the material in real-time.

Electric Cars H1 2022: Targets, Sales & Shortages

In this premium article, IDTechEx provides an overview of the multiple industry shortages, an update on global car sales data for H1 2022, and highlights three approaches to improve drive cycle efficiency: 800V platforms, high voltage cabling, and solar bodywork.

TuSimple: Autonomous Trucks on the Verge of Commercial Deployment

TuSimple is one of the biggest and best-funded companies working on autonomous trucks. It has been expanding its network of autonomous compatible roads, making partnerships with potential commercial customers, and engaging in the most advanced stages of testing. In December 2021, TuSimple became the first company to operate a completely unmanned mission from Tucson to Phoenix in Arizona, US.

New York Electric Vehicle Charging Pilot

This project forms part of the DOT Studio - a collaboration between the New York City Department of Transportation and Newlab, focused on applying emerging technologies to advance planning, policy, operations, and real-time management of transportation across New York City in line with the City's Vision Zero and sustainability goals.

Advanced Semiconductor Packaging Paves Way to Data-Centric Future

If the future were to be categorized in one word, it would be "data-centric". IC vendors have been pushed towards "advanced semiconductor packaging" to meet the world's data needs.

Wearable to Detect Allergens, Fire Accelerants, Chemical Markers

A researcher is creating a portable, wearable device for rapid gas analysis that could detect illness immediately. Advancements in micro-gas chromatography in the past 20 years have demonstrated great potential for the development of powerful portable gas analysis devices. But it remains a challenge to achieve efficient separation and rapid detection for effective gas analysis in a highly integrated and cost-effective platform, as well as in a mobile device.

Recylable Wind Turbine Blades Get to Work

The first commercial installation of recyclable wind turbine technology recently took place at RWE's Kaskasi offshore wind power project in Germany. It marks a turning point in the long-term sustainability of offshore wind power.

Nano Sponges on Graphene Have Potential for Rapid Wastewater Treatment

Efficient adsorbents for industrial wastewater treatment are important to minimize potential environmental damage. In particular, organic dyes, as a significant group of industrial pollutants, are usually highly water soluble, non-degradable and many are toxic to carcinogenic. Researchers now present a new approach to design an innovative composite material, consisting of a nanoporous, ultrathin covalent organic framework anchored on graphene, that is highly efficient at filtering organic pollutants from water.

ENSO Launches Pay-Per-Mile Tyre for Electric Taxis

London-based EV tyre manufacturer ENSO will launch its innovative Pay-Per-Mile Tyre this summer, in collaboration with digital fleet financing provider Zeti.

Stratasys To Acquire Covestro's Additive Manufacturing Business

Stratasys Ltd has signed a definitive agreement to acquire the additive manufacturing materials business of Covestro. The acquisition is expected to be immediately accretive upon closing.

OrelTech

OrelTech has developed an innovative range of particle-free conductive inks that can be metallized at low temperatures using plasma rather than heat or light. These are targeted at multiple application sectors, including biosensors and catalytic surfaces.

UltraSense Systems: All-in-One AI Haptic Processor

Headquartered in San Jose, USA, UltraSense Systems is a startup offering its haptic process for both sensing touch and driving actuators, focused on pioneering smart surfaces with rapid product integration capabilities.

Bioplastics to Rapidly Expand With CAGR 10.1%, Says IDTechEx

As bioplastic materials transition from being a "nice-to-have" to materials with a very strong, viable business case, manufacturers are racing to keep up with demand. With all this activity, IDTechEx forecasts global annual bioplastics production capacity to grow at a CAGR of 10.1% over the next ten years.