News article (Portal)
20 Dec 2021

Soft Semiconductors that Stretch Like Human Skin
Semiconductors are moving away from rigid substrates, which are cut or formed into thin discs or wafers, to more flexible plastic material and even paper thanks to new material and fabrication discoveries. The trend toward more flexible substrates has led to fabrication of numerous devices, from light-emitting diodes to solar cells and transistors.
News article (Portal)
22 Jul 2021

Bridge Energy to be Harvested in Pioneering Research Project
Unused energy trapped within bridges is to be harvested in a major new international project. Traffic and wind regularly cause low frequency vibrations to ripple through bridge building materials such as steel and concrete. This energy would normally travel away from its source before dissipating but academics have recognised an opportunity. They intend to capture and recycle this untapped source by using the principles of physics.
External press release (Portal)
15 Jul 2021

Backscatter Breakthrough Runs Near-Zero-Power IoT Comms at 5G Speeds
The promise of 5G Internet of Thingsnetworks requires more scalable and robust
communication systems — ones that deliver drastically higher data rates and lower power
consumption per device.
Full profile interview
23 Apr 2021

Atheraxon
Atheraxon is a start-up that spun out of the ATHENA Lab at Georgia Tech. IDTechEx spoke with their CEO Brian Arnberger and CTO Jimmy Hester on 15th Apr. 2021.
Full profile interview
15 Apr 2021

Carbice Corporation
Carbice Corporation produce advanced thermal interface materials based on CNTs. IDTechEx spoke with Dr Baratunde Cola (CEO) and their team.
News article (Portal)
31 Mar 2021

Leveraging the 5G Network to Wirelessly Power IoT Devices
Researchers have uncovered an innovative way to tap into the over-capacity of 5G networks, turning them into "a wireless power grid" for powering Internet of Things devices that today need batteries to operate.
News article (Portal)
10 Mar 2021

Key to Low-cost, Fast Production of Solid-state Batteries for EVs
A new fabrication technique could allow solid-state automotive lithium-ion batteries to adopt nonflammable ceramic electrolytes using the same production processes as in batteries made with conventional liquid electrolytes.
External press release (Portal)
8 Dec 2020

Researchers use Facebook Activity to Predict Psychiatric Diagnoses
Researchers at The Feinstein Institutes for Medical Research developed novel machine learning algorithms from a user's Facebook activity capable of accurately predicting those who go on to develop schizophrenia spectrum disorders and mood disorders more than a year prior to the patient's first hospitalization and official diagnosis.
News article (Portal)
19 Aug 2020

New Flexible Electronics Research Shows Promise for Spinal Therapies
Patients recovering from spinal cord injuries or who have mobility disorders related to spinal nerve compression are frequently treated by the conditioning of the Hoffmann's reflex via non-surgical electrostimulation therapy. To track the progress of the treatment, electromyography is used to record the amplitude of the patient's muscle twitch response.
News article (Portal)
22 Jun 2020

Hyper-Efficient Conservation Robot
For the next several months, visitors to the Atlanta Botanical Garden will be able to observe the testing of a new high-tech tool in the battle to save some of the world's most endangered species. SlothBot, a slow-moving and energy-efficient robot that can linger in the trees to monitor animals, plants, and the environment below, will be tested near the Garden's popular Canopy Walk.
Topic overview
12 Jun 2020

mmWave electronics: towards AiP (antenna-in-package) technologies
Electronic packaging will play an important role in enabling higher frequency - e.g., mmWave - electronics. In particular, as the frequency goes up, the antenna spacing shrinks, the need to have large antenna arrays for gain as well as beam forming purposes increases; and the imperative to cut down transmission loss including by placing components closer together inside a package dramatically grows
News article (Portal)
18 May 2020

Self-Charging Medical Devices
Expect more healthcare wearables that power themselves, many even managing with no battery. The IDTechEx report, "Energy Harvesting for Electronic Devices 2020-2040" covers this and more.
News article (Portal)
23 Apr 2020

Lung-Heart Super Sensor on a Chip Tinier Than a Ladybug
During a stroll, a woman's breathing becomes a slight bit shallower, and a monitor in her clothing alerts her to get a telemedicine check-up. A new study details how a sensor chip smaller than a ladybug records multiple lung and heart signals along with body movements and could enable such a future socially distanced health monitor.
News article (Portal)
25 Dec 2019

Storing Medical Information Below the Skin's Surface
Every year, a lack of vaccination leads to about 1.5 million preventable deaths, primarily in developing nations. One factor that makes vaccination campaigns in those nations more difficult is that there is little infrastructure for storing medical records, so there's often no easy way to determine who needs a particular vaccine.
News article (Portal)
5 Dec 2019

Perovskite Nanocrystals More Durable with Plastic Hair and Silica
Perovskite nanocrystals hold promise for improving a wide variety of optoelectronic devices - from lasers to light emitting diodes - but problems with their durability still limit the material's broad commercial use.
News article (Portal)
12 Nov 2019

Novel Solar Cells Arrive at International Space Station for Testing
Five different types of solar cells have arrived at the International Space Station to be tested for their power conversion rate and ability to operate in the harsh space environment as part of the MISSE-12 mission. One type of cell, made of low-cost organic materials, has not been extensively tested in space before.
News article (Portal)
9 Oct 2019

3D printing technique accelerates nanoscale fabrication a thousandfold
Using a new time-based method to control light from an ultrafast laser, researchers have developed a nanoscale 3D printing technique that can fabricate tiny structures a thousand times faster than conventional two-photon lithography techniques, without sacrificing resolution.
News article (Portal)
24 Sep 2019

Shape-shifting robots built from 'smarticles'
Building conventional robots typically requires carefully combining components like motors, batteries, actuators, body segments, legs and wheels. Now, researchers have taken a new approach, building a robot entirely from smaller robots known as "smarticles" to unlock the principles of a potentially new locomotion technique.
News article (Portal)
24 Sep 2019

Wearable brain-machine interface could control a vehicle, computer
Combining new classes of nanomembrane electrodes with flexible electronics and a deep learning algorithm could help disabled people wirelessly control an electric wheelchair, interact with a computer or operate a small robotic vehicle without donning a bulky hair-electrode cap or contending with wires.
News article (Portal)
12 Sep 2019

Stretchy plastic electrolytes for new lithium-ion battery design
The growing popularity of lithium-ion batteries in recent years has put a strain on the world's supply of cobalt and nickel - two metals integral to current battery designs - and sent prices surging. In a bid to develop alternative designs for lithium-based batteries with less reliance on those scarce metals, researchers have developed a promising new cathode and electrolyte system that replaces expensive metals and traditional liquid electrolyte with lower cost transition metal fluorides and a solid polymer electrolyte.