This report has been updated. Click here to view latest edition.

If you have previously purchased the archived report below then please use the download links on the right to download the files.

电动车的动力电子组件 2023-2033


显示全部 说明 内容、图表列表 价格 Related Content
在《电动车的动力电子组件 2023-2033》中,IDTechEx 深入探讨了电动车动力电子组件领域,针对不断发展的半导体和封装材料,包括硅、碳化硅和氮化镓半导体、管芯连接材料、引线接合、热管理等,提出了深刻的技术见解。IDTechEx 提供了详细的预测,列明逆变器、车载充电器 (OBC)、DC-DC 转换器(按电压分为 600V、1200V)和半导体类型(硅、碳化硅、氮化镓)的单位销售额、GW 和美元需求。
The demand for electric vehicle (EV) power electronics will increase dramatically in the next ten years, primarily driven by rapid growth in the battery electric vehicle (BEV) car market where IDTechEx predicts a 15% CAGR globally over the next decade. Currently, the weighted-average battery capacity of BEV cars is increasing in all regions, piling pressure on battery supply chains and creating uncertainty. The result is that drive cycle efficiency must come to the forefront of powertrain design, meaning the time has come for high voltage wide bandgap (WBG) power electronics.
In this report, IDTechEx provides a deep-dive into EV power electronics with technology insights into the evolving semiconductor and package materials, including Si, SiC and GaN semiconductors, die-attach materials, wire bonding, thermal management, and more. IDTechEx presents granular forecasts detailing unit sales, GW and US$ demand for inverters, onboard chargers (OBC) and DC-DC converters segmented by voltage (600V, 1200V) and semiconductor type (Si, SiC, GaN).
Wide bandgap (WBG) semiconductors: SiC & GaN for inverters, OBCs, DC-DC converters
Si IGBTs have dominated the medium-to-high power device range for 20 years including in EV power electronics but are giving way to a new generation of WBG materials: SiC and GaN. This will fundamentally impact the design of new power devices, including the package materials, as ever smaller and higher power-density modules, operating at higher temperatures, emerge.
SiC MOSFET adoption is the main story of the mid-term outlook and will grow rapidly to dominate market share, with adoption timelines for individual device types given in the report. While the performance gap between demonstrated and theoretical SiC MOSFETs is typically less than an order of magnitude, reflecting some room for progress, GaN is operating two orders of magnitude less than its theoretical limits, reflecting huge long-term potential. GaN commercialization is currently limited by its low power/voltage operation, a result of technological immaturity, and its adoption in EV depends on this improving. Today costs for bulk Gan are also prohibitive, but Gan-on-Si will initially be adopted with the first 600V GaN inverters starting to emerge.
OBCs and DC-DC converters operate at much lower powers than inverters, but WBG semiconductors will still be beneficial and adopted at a similar rate in these device types. As well as increasing overall power density, the greater efficiency allows for faster charging of the battery from the OBC, and less energy loss during low voltage battery charging (via the converter), increasing range. The IDTechEx report predicts GaN market entry occurs for OBC and DC-DC converters slightly earlier than for inverters due to the lower power and voltage requirements.
Evolution of package materials & thermal management: die-attach, wire bonding, TIM, water/oil cooling and more
The report compares a new generation of compact and efficient packaging structures designed to sustain higher power densities and operating temperatures. Approaches include direct substrate cooling, ribbon bonding, direct lead bonding, copper ribbon bonds, silver or copper sintered die attach pastes, integrated heatsinks, TIM removal, oil cooling, double sided cooling and more.
Die attach materials are a clear pain point with higher junction temperatures and a ban on Pb materials leading the market to Ag and Cu sintered materials. Ag sintering has been in the qualification phase for many years and IDTechEx believes this is a very promising technology whose time has now come. Indeed, the nano versions being adopted rapidly today were in development for over seven years. Cu sintered materials are still largely pre commercial but have the potential to improve on the performance of Ag sintering while offering greater versatility. The report highlights and compares sintered materials and provides insight into the emerging supply chain.
Another key area is wire bonding. The first generation of power electronic packages used Al wire bonding which was easily applied to dies without too much force or time. However, Al has poor surface area coverage (<20%) and a lower thermal conductivity than copper. This is leading the market to different types of copper bonding, which brings new manufacturing challenges with a requirement for higher bonding powers, right at a time when WBG materials cause dies to shrink in thickness and become more fragile. The report covers case studies for different Cu bonding types in EV applications.
Looking at thermal management, many inverter suppliers have now eliminated the TIM between the heatsink and baseplate to improve thermal resistance, although this does not mean there are no TIM opportunities within power electronics. Many components still require a TIM and TIMs are often still used to bond the module heat sink to the water-glycol cold plates. The report provides analysis of these trends and the drivers behind adoption.
Inverter IGBT or SiC MOSFET modules are mostly cooled using water-glycol. However, both single-side and double-sided cooling options are used, each with their own benefits. There has also been an increase in using oil to cool power electronics to eliminate much of the water-glycol componentry within the electric drive unit, using the same oil for the motors and inverter. Whilst there has not been adoption of this approach in the current market, IDTechEx sees promise for this approach and includes a 10-year outlook for EV inverters using air, water, or oil cooling.
Key Aspects:
  • Electric vehicle markets: regional trends & future growth
  • Supply chain for power semiconductor materials, devices & OEMs
  • Evolution of package materials & thermal management: die-attach, wire bonding, TIM, water/oil cooling and more
  • High voltage platform (800V) market drivers & future developments
  • Company profiles including interviews
  • Forecasts 2023-2033: Unit sales, GW and US$ demand for inverters, onboard chargers (OBC) and DC-DC converters segmented by voltage (600V, 1200V) and semiconductor type (Si, SiC, GaN).
  • Forecasts 2023-2033: OBC by Power Level: 4kW, 6-11.5kW, 16-22kW
  • Forecasts 2023-2033: Inverter, OBC & Converter, Si, SiC, GaN, Cost Outlook (US$ per kW)
  • Forecasts 2023-2033: AC & DC Charging infrastructure installations (Global)
  • Forecasts 2023-2033: Inverter cooling strategy: air, oil, water-glycol
从 IDTechEx 访问分析师
所有报告购买订单均包括与一名专家分析师进行 30 分钟的电话交谈,专家分析师将帮助您将报告中的重要发现与您正在处理的业务问题联系起来。这需要在购买报告后的三个月内使用。
如果您对这一报告有任何疑问,请随时联系我们的报告团队 或致电我们的销售经理:

AMERICAS (USA): +1 617 577 7890
ASIA (Japan): +81 3 3216 7209
ASIA (Korea): +82 10 3896 6219
EUROPE (UK) +44 1223 812300
Table of Contents
1.1.Report Introduction
1.2.Power Electronics in Electric Vehicles
1.3.Benchmarking Silicon, Silicon Carbide & Gallium Nitride Semiconductors
1.4.Power Electronics & Battery Shortages
1.5.SiC Drives 800V Platforms
1.6.EV Markets Surge in 2022
1.7.Inverter Forecast 2020-2033 (GW): GaN 600V, Si IGBT 600V, SiC MOSFET 600V, 1200V
1.8.Discretes vs Power Modules for Inverters 2020-2033
1.9.Inverter Power Density Increases Over Time
1.10.Automotive: Key Application for Sintering
1.11.Power Electronics: Materials Trends Overview
1.12.Inverter Market Share 2020-2033: GaN 600V, Si IGBT 600V, SiC MOSFET 600V, 1200V
1.13.800V Model Announcements in China (2022)
1.14.Evolving SiC Supply Relationships
1.15.OBC by Level: 4kW, 6-11.5kW, 16-22kW 2023- 2033
1.16.OBC & DC-DC Converter: Si, SiC, GaN 2020 - 2033 (GW)
1.17.Inverter, OBC, DC-DC Converter 2020-2023 (GW)
1.18.Inverter, OBC, DC-DC Converter 2020-2023 (US$ billion)
1.19.IDTechEx Company Profiles
2.1.Electric Vehicle Definitions
2.2.Electric Vehicles: Typical Specs
2.3.Exponential Growth in Regional EV Markets
2.4.Summary of Regional Trends & Drivers for EVs in 2022
2.5.Regional Trends: China
2.6.NEV Sales by Vehicle Class
2.7.The Dual-Credit System (1)
2.8.The Dual-Credit System (2)
2.9.Regional Trends: EU + UK + EFTA
2.10.Europe Emissions Standards
2.11.EU ICE Ban by 2035
2.12.EU 'Fit for 55'
2.13.Regional Trends: US
2.14.Electric Pickups - The Next Big Thing
2.15.Hybrid Car Sales Surges
2.16.Powertrain Tailpipe Emissions Comparison
2.17.Automaker & Government EV Targets
2.18.Cars: Total Cost of Ownership
2.19.Shortages Across the Supply Chain
2.20.Grid Emissions (1)
2.21.Grid Emissions (2)
2.22.Chip Shortages - Background
2.23.Semiconductor Content Increased
3.1.What is Power Electronics?
3.1.1.Power Electronics Use in Electric Vehicles
3.1.2.Transistor History & MOSFET Overview
3.1.3.Wide Bandgap (WBG) Semiconductor Advantages & Disadvantages
3.1.4.Benchmarking Silicon, Silicon Carbide & Gallium Nitride Semiconductors
3.1.5.Advantages of SiC Material
3.1.6.Limitations of SiC Power Devices
3.1.7.GaN's Potential to Reach High Voltage
3.1.8.SiC & GaN Have Substantial Room for Improvement
3.1.9.Automotive GaN Device Suppliers are Growing
3.1.10.GaN to Become Preferred OBC Technology
3.1.11.Challenges for GaN Devices
3.1.12.SiC Power Roadmap
3.1.13.Applications Summary for WBG Devices
3.2.Inverter, OBC, Converter Design & Si, SiC, GaN Outlook
3.2.1.Inverter Overview
3.2.2.Pulse Width Modulation
3.2.3.Traditional EV Inverter
3.2.4.Discretes & Modules
3.2.5.Inverter Printed Circuit Boards
3.2.6.Electric Vehicle Inverter Benchmarking
3.2.7.SiC Impact on the Inverter Package
3.2.8.Inverter Forecast 2020 - 2033 (GW): GaN 600V, Si IGBT 600V, SiC MOSFET 600V, 1200V
3.2.9.OBC & DC-DC Converter: Si, SiC, GaN 2020-2033 (GW)
3.2.10.Onboard Charger Circuit Components
3.2.11.Tesla Onboard Charger / DC-DC Converter
3.2.12.OBC by Level: 4kW, 6-11.5kW, 16-22kW 2023- 2033
4.1.Automotive Power SC Supplier Market Shares
4.2.Evolving SiC Supply Relationships
4.3.SiC Supply Chain in 2023
4.4.Infineon CoolSiC Efficiency Gains
4.5.Infineon Establishing Major OEM Partnerships
4.6.Hyundai Diversifies SiC Supply for Best-Selling 800V E-GMP Platform
4.7.ROHM Semiconductor Expands SiC Production Capacity
4.8.STMicroelectronics Releases ACEPACK in Race for Market Leadership
4.9.Wolfspeed: Major Investment & OEM Partnerships for SiC
4.10.Delphi Technologies (BorgWarner) Supply Luxury Automakers with Viper SiC Module
4.11.BorgWarner Integrated Drive Module for Ford
4.12.On Semi EliteSiC
4.13.GM From Bolt & Volt to Ultium
4.14.Hitachi Double Sided IGBTs to Major OEM
4.15.Volvo Heavy Duty SiC Inverter
4.16.Continental / Jaguar Land Rover
4.17.Nissan Leaf Custom Design
5.1.Toyota Prius 2004-2010
5.2.800V Si IGBT Choices
5.3.2008 Lexus
5.4.Toyota Prius 2010-2015
5.5.Nissan Leaf 2012
5.6.Honda Accord 2014
5.7.Honda Fit (by Mitsubishi)
5.8.Toyota Prius 2016 Onwards
5.9.Chevrolet Volt 2016 (by Delphi)
5.10.Cadillac 2016 (by Hitachi)
5.11.BWM i3 (by Infineon)
5.13.Continental / Jaguar Land Rover Inverter
5.14.Nissan Leaf Custom Inverter Design
6.1.1.Power Module Packaging Over the Generations
6.1.2.Power Electronics Material Evolution
6.1.3.Automotive: Key Application for Sintering
6.1.4.Module Packaging Material Dimensions
6.1.5.OEM Power Module Material Innovations
6.1.6.Die Attach Materials: Solder, Ag & Cu Sintering & Key Players
6.1.7.WBG Moves Beyond the Limits of SAC
6.1.8.Inverter Power Density Increases Over Time
6.1.9.Die and Substrate Attach are Common Failure Modes
6.1.10.Ag Sintering with WBG Semiconductors
6.1.11.Resolving Challenges with Ag Sintering
6.1.12.Nano Particle Ag Sinter
6.1.13.Power Module Supply Chain & Innovations
6.1.14.Summary of Ag sintering, Solder and TLPB
6.1.15.Toyo Chem: Sintered Die Attach Paste
6.1.16.LG: Ag Sintering Paste with Low Sintering Temperature
6.1.17.Amo Green: Pressure-less Nano Ag Sintering Paste
6.1.18.Indium Corp: Nano Ag Pressure-less Sinter Paste
6.1.19.Nihon Superior: Nano Silver for Sintering
6.1.20.Cu Sintering Pastes Improve Ag Sintered Performance
6.1.21.Hitachi: Cu Sintering Paste
6.1.22.Cu Sintering: Characteristics
6.1.23.Reliability of Cu Sintered Joints
6.1.24.Mitsui Mining: Nano Copper Pressured and Pressure-less Sintering Under N2 Environment
6.1.25.Mitsui Mining: Nano Copper Pressure-less Sintering Under N2 Environment
6.1.26.Die Attach Technology Trends
6.1.27.Wire Bond Evolution & Future Alternatives
6.1.28.Wire Bonds a Failure Point
6.1.29.Alternative Wire Bonding Techniques
6.1.30.Die Top System - Heraeus
6.1.31.Direct Lead Bonding (Mitsubishi)
6.1.32.Tesla Inverter Design Evolution
6.1.33.Embedded Lead Frames for Thermal Performance
6.1.34.Technology Evolution Beyond Al Wire Bonding
6.2.Substrate Materials & Future Alternatives
6.2.1.The Choice of Ceramic Substrate Technology
6.2.2.AlN: Overcoming its Mechanical Weakness
6.2.3.Thermal Conductivity vs Thermal Expansion
6.2.4.Ceramics: CTE Mismatch
6.2.5.Approaches to Metallisation: DPC, DBC, AMB and Thick Film Metallisation
6.2.6.Direct Plated Copper (DPC): Pros and Cons
6.2.7.Double Bonded Copper (DBC): Pros and Cons
6.2.8.Active Metal Brazing (AMB): Pros and Cons
6.2.9.Thick Film Printing
6.2.10.Heraeus - Materials for Power Electronics
6.2.11.ALMT - MgSiC Baseplate
6.3.Thermal Management
6.3.1.Optimal Temperatures for Multiple Components
6.3.2.Single Side, Double Side, Direct, and Direct Cooling
6.3.3.Double-Sided Cooling Examples
6.3.4.Baseplate, Heat sink, and Encapsulation Materials
6.3.5.Removing Thermal Interface Materials
6.3.6.Why TIM is Used in Power Electronics
6.3.7.Why the Drive to Eliminate the TIM?
6.3.8.Thermal Grease: Other Shortcomings
6.3.9.EV Inverter Modules Where TIM has Been Eliminated (1)
6.3.10.EV Inverter Modules Where TIM has Been Eliminated (2)
6.3.11.Infineon - Pre-Applied TIM
6.3.12.IGBTs and SiC are not the Only TIM Area in Inverters
6.3.13.Cooling power electronics: water or oil
6.3.14.Inverter Package Cooling
6.3.15.Drivers for Direct Oil Cooling of Inverters
6.3.16.Advantages, Disadvantages and Drivers for Oil Cooled Inverters
6.3.17.Direct Oil Cooling Projects
6.3.18.Inverter Cooling Strategy Forecast (Units)
6.3.19.Ford Mustang Mach-E
6.3.20.Fraunhofer and Marelli - Directly Cooled Inverter
6.3.21.Hitachi - Oil Cooled Inverter
6.3.22.Jaguar I-PACE 2019
6.3.23.Lucid - Water Cooled Onboard Charger
6.3.24.Nissan Leaf
6.3.25.Renault Zoe 2013 (Continental)
6.3.27.Senior Flexonics - IGBT Heat Sink Design
6.3.28.Tesla Model 3
6.3.29.VW ID
7.1.SiC Drives 800V Platforms
7.2.Emerging 800V Platforms & SiC Inverters
7.3.Inverter Market Share 2020 - 2033: SiC 1200V, SiC 600V, GaN 600V, Si IGBT 600V
7.4.800V Model Announcements in China (2022)
7.5.800V For & Against
7.6.DCFC Impact on Li-ion Cells
7.7.Fast Charge Cell Design Hierarchy - Levers to Pull
7.8.DC Fast Charging Levels
7.9.AC & DC Charging Installations 2015-2032
7.10.800V Platform Discussion & Outlook
8.1.Exponential Growth in Regional EV Markets
8.3.Inverters per Car Forecast
8.4.Multiple Motors / Inverters per Vehicle
8.5.Inverter Forecast 2020 - 2033 (GW): GaN 600V, Si IGBT 600V, SiC MOSFET 600V, 1200V
8.6.Inverter Market Share 2020 - 2033: GaN 600V, Si IGBT 600V, SiC MOSFET 600V, 1200V
8.7.Inverter Cooling Strategy Forecast (Units)
8.8.Discretes vs Power Modules for Inverters 2020 - 2033
8.9.OBC & DC-DC Converter: Si, SiC, GaN 2020 - 2033 (GW)
8.10.Inverter, OBC, DCDC Converter 2020 - 2023 (GW)
8.11.Inverter, OBC, DCDC Converter 2020 - 2023 (US$ billion)
8.12.OBC by Level: 4kW, 6-11.5kW, 16-22kW 2023- 2033
8.13.Inverter, OBC & Converter, Si, SiC, GaN Cost Assumptions (US$ per kW)
8.14.AC & DC Charging Installations 2015-2032
9.2.Efficient Power Conversion: GaN FETs
9.5.ESI Automotive
9.6.General Electric: Megawatt Converters
9.9.Nexperia: GaN for EV Power Electronics
9.10.Power Electronics: EV Charging


幻灯片 221
预测 2033
ISBN 9781915514523

Subscription Enquiry