Printed, Flexible and Organic Electronics

Printed, Flexible and Organic Electronics

Printed Electronics, being thin film silicon or inorganic or organic semiconductors, can be used to form Thin Film Transistor Circuits (TFTCs), such as replacing the functionality of simple silicon chips. TFTCs also employ thin film conductors and dielectrics and the ultimate objective is to make many different components at the same time - such as displays, batteries, sensors, microphones etc using the same materials or at least the same deposition techniques thus saving cost and improving reliability. Some TFTCs will be capable of covering large areas to affordably form electronic billboards, smart shelves and so on. They will be lightweight, rugged and mechanically flexible. Often they will be made by rapid, high-volume reel-to-reel processing even forming a part of regular printing processes for graphics. These circuits will be cheap enough to permit electronics where envisaged silicon chips are always or almost always too expensive, where multiple components and needed, and where silicon is impracticle (e.g. not flexible, brittle, thick etc).
Filtered by:
Printed, Flexible and Organic Electronics
Company
Topic
Show
 
2019
19 Jul 2019

Sheaths become mighty new layer in artificial muscles

Over the last 15 years, researchers have invented several types of strong, powerful artificial muscles using materials ranging from high-tech carbon nanotubes to ordinary fishing line.
19 Jul 2019

A crystal clear step closer to commercial solar cells

A synthetic approach developed by researchers generates homogeneous and defect-free crystals that could fast-track the commercialization of perovskite solar cells.
18 Jul 2019

Artificial "muscles" achieve powerful pulling force

As a cucumber plant grows, it sprouts tightly coiled tendrils that seek out supports in order to pull the plant upward. This ensures the plant receives as much sunlight exposure as possible. Now, researchers have found a way to imitate this coiling-and-pulling mechanism to produce contracting fibers that could be used as artificial muscles for robots, prosthetic limbs, or other mechanical and biomedical applications.
18 Jul 2019

Window film evens out indoor temperature using solar energy

​A window film with a specially designed molecule could be capable of taking the edge off the worst midday heat and instead distributing it evenly from morning to evening. The molecule has the unique ability to capture energy from the sun's rays and release it later as heat.
18 Jul 2019

Red wine may hold the key to next-gen wearable technology

A team of scientists are seeking to kick-start a wearable technology revolution by creating flexible fibres and adding acids from red wine.
18 Jul 2019

CPI to accelerate commercialisation of lightweight nanomaterials

CPI is contributing its state-of-the-art facilities and capabilities to a Horizon 2020 project focused on creating an open-innovation test bed for the development and production of lightweight embedded electronics.
18 Jul 2019

Study contributes to the production of flexible electronic devices

Extremely light and even bendable optoelectronic equipment that supplies, detects and controls light will become commonplace in the near future. A great deal of research is progressing in this direction, as exemplified by a paper recently published.
17 Jul 2019

Printed Electronics USA: The must-attend event

IDTechEx has studied the printed electronics market since 2002. Of course, we're not just looking at materials that are printed, but also devices that are flexible, organic, large area—in reality, there isn't a good phrase to encompass the huge set of enabling materials, processes and components that are radically changing electronics as we know it. The phrase "not conventional electronics" doesn't really cover it, as some aspects of printed electronics are mature today, having been used for many years.
17 Jul 2019

Laser diodes: How smartphones and self-driving cars see the world

Tiny infrared lasers offer 3D sensing functionality for consumer electronics like smartphones and robots like self-driving cars. In this article, the technology consulting firm IDTechEx demonstrate how advances in laser technology and decreases in laser price enable novel applications in optical sensing.
17 Jul 2019

High-safety, flexible and scalable rechargeable planar micro-batteries

Increasing development of micro-scale electronics has stimulated demand of the corresponding micro-scale power sources, especially for micro-batteries. However, complex manufacturing process and poor flexibility of the traditional stacked batteries have hindered their practical applications.
16 Jul 2019

Tiny nanocrystals create 'brighter' future for TV viewers

Researchers have discovered tiny 'greener' nanocrystals that can be manipulated to produce high-quality pictures and lighting in electronic devices such as televisions.
15 Jul 2019

New technique could brighten screens, make smartphone batteries last

Our future TV and smartphone screens could have double the energy efficiency, thanks to a technique invented by scientists.
15 Jul 2019

Organic solar cells will last 10 years in space

Over the past two decades, organic solar cells have garnered much attention thanks to their light weight, flexibility and unprecedented energy-to-weight ratios of 10 to 20 W/g, which make them a promising candidate for space applications, although their radiation stability is still poorly
12 Jul 2019

Direct diode lasers: how technology evolution is opening new markets

The evolution of diode laser price and performance is rapidly opening new markets. In this article, the technology consulting firm IDTechEx demonstrate how advances in semiconductor laser technology enable novel applications in laser material processing and industrial manufacturing.
12 Jul 2019

CLEARink And FLEx to create next gen ePaper display solutions

CLEARink Displays and FLEx Lighting announce a collaboration to create the next generation ePaper display solution based on CLEARink's ePaper 2.0 and FLEx's ultra-thin front light.
12 Jul 2019

Lumitronix utilises paper and PET as printed circuit board

In cooperation with its technology partners, the Swabian LED company Lumitronix succeeded in equipping plasma-metallised flexible printed circuit boards with electronic components. This is based on the one-of-a-kind process of plasma metallisation.
11 Jul 2019

Wearable electronics that are comfortable, elastic, fully untethered

ElectroDermis is a fabrication system that simplifies the creation of wearable electronics that are comfortable, elastic, and fully untethered. Electronics that can be temporarily attached to the body (like bandages or party masks), but functional and aesthetically pleasing.
10 Jul 2019

Ynvisible Interactive to Acquire Consensum Production AB

Ynvisible Interactive Inc is pleased to announce that it has entered into a binding Letter of Intent with Consensum Production AB, which sets out the basic terms and conditions pursuant to which Ynvisible will acquire 100% of the issued and outstanding shares of Consensum.
9 Jul 2019

A wearable vibration sensor for accurate voice recognition

A voice-recognition feature can be easily found on mobile phones these days. Often times, we experience an incident where a speech recognition application is activated in the middle of a meeting or a conversation in the office. Sometimes, it is not activated at all regardless of numbers of times we call out the application.
9 Jul 2019

Capability to produce selective plating onto stretchable fabrics

Statex and Laird Performance Materials have announced a joint and new capability which creates selective plating and high electrical conductivity onto both sides of stretchable fabrics. Potential uses will range from components found in consumer/professional wearable products to medical devices to military/aerospace and automotive critical systems.