This report has been updated. Click here to view latest edition.

If you have previously purchased the archived report below then please use the download links on the right to download the files.

5G 및 6G를 위한 저손실 재료 (2023-2033년)

5G 및 6G 재료 시장 평가. 저손실 재료 예측, 동향, 기업 및 기술.

모두 보기 설명 목차, 표 및 그림 목록 가격 Related Content
전 세계적으로 5G 장치의 배포가 증가함에 따라 수십억 달러 규모의 산업으로 성장했다. 5G 네트워크의 가장 혁신적인 측면은 10년 후에 도약할 고주파 5G 기술에 의존한다. mmWave 5G 장치는 저손실 재료를 사용하여 PCB 및 패키지 수준에서 전송 손실을 줄인다. 이는 5G용 저손실 재료 시장을 주도하여, 2033년까지 미화 18억 달러를 넘어설 것이다.
Fifth-generation telecommunication technology, 5G, is more than a faster mobile experience to stream movies. It enables a universal connection between devices from automotive to remote robots. As profitable business models and killer applications start to emerge, 5G is one of fastest growth markets, which IDTechEx forecasts to hit over $842B in 2033 and contribute trillions in annual connectivity boost to global GDP.
The most revolutionary aspect of the 5G network relies on high frequency 5G technologies, i.e. mmWave 5G, which utilize spectrum from 26 GHz up to 40 GHz. At such high frequencies, many technologies and devices are facing challenges such as significant transmission loss, higher power usage needing more efficient power supply, and excess heat generation. Transmission loss is a pain point for both 5G antennas and radio frequency integrated circuits. For low-frequency 5G, i.e. sub-6 GHz 5G, due to the high data transfer speed, reducing signal loss is also desirable.
Overview of challenges, trends and innovations for mmWave 5G, source: IDTechEx
With the future rise of mmWave 5G, low-loss materials will experience rapid growth and play an increasingly important role. In this report, we survey the landscape of the low-loss materials and benchmark their performance by five key factors, i.e. dielectric constant (Dk), dissipation factor (Df), moisture absorption, cost, and manufacturability. Low-loss materials will not only be used as a substrate for RF components or for the PCB, but also within advanced packages. One strong packaging trend is antenna in package (AiP); as telecom technology goes higher in frequency towards mmWave 5G, the size of the antenna elements will shrink such that the arrays can be fitted into the package itself. This integration will also help shorten the RF paths and thus minimize the transmission losses. AiP will need low-loss materials for the substrates, redistribution layers, electromagnetic interference (EMI) shielding, mold underfill (MUF) materials, and more.
Scope of the low-loss materials covered in the report, source: IDTechEx
We highlight promising low-loss materials for 5G devices. This includes:
  • Low-loss thermoset materials: thermoset materials dominate the market for 3G/4G network devices. However, the high Dk and Df restrict their use in mmWave 5G. We focus on the strategies and R&D effort from key materials suppliers to reduce the Dk and Df for these materials
  • Polytetrafluoroethylene (PTFE): one of the most common materials for high-frequency applications such as automotive radar systems, high speed/high frequency (HS/HF) board and connectors
  • Liquid crystal polymers (LCP): it has been adapted to make flexible board for smartphone antennas. The market will continue to grow and expand into other applications
  • Low temperature co-fired ceramic (LTCC): the low Df and wide range of Dk for LTCC will accelerate the use of LTCC based components such as compact high frequency filters
  • Others: in order to optimise the performance for 5G systems, a variety of materials will be used, such as hydrocarbons, poly (p-phenylene ether) (PPE or PPO), and glass. Those alternative materials will take over a large share of the low-loss 5G materials market.
Additionally, though the 6G spectrum is years away from being allocated, research institutions and materials suppliers are already exploring the material requirements needed to meet the next generation of telecommunication technologies. This report explores the approaches to achieve even lower Df/Dk and the potential 6G applications, like reconfigurable intelligent surfaces (RIS).
A ten-year granular forecast focusing on low-loss materials area and revenue for 5G devices is presented in this report, with over five forecast lines. The forecasts are segmented by:
  • Frequency: sub-6 GHz 5G and mmWave 5G
  • Market applications: low-loss materials for infrastructure, smartphone and customer premises equipment (CPE)
  • Materials type: exploring the evolution of low-loss materials for both sub-6GHz 5G and mmWave 5G
Forecast and growth rate of low-loss materials for 5G, source: IDTechEx
Based on materials trends, we forecast the low-loss materials revenue for 5G devices from 2023 to 2033. The total market will be over US$1.8B by 2033. The report contains a comprehensive analysis of different low-loss materials from different perspectives such as performance, technology trends, potential, and bottlenecks for large scale deployment. Importantly, the report presents an unbiased analysis of primary data gathered via our interviews with players across the supply chain, and it builds on our large database of 5G infrastructure and user equipment data.
Key questions answered in this report:
  • Which low-loss materials are the incumbents in each 5G application?
  • Which low-loss materials are emerging for each 5G application?
  • What are the advantages and disadvantages for each material type in 5G?
  • Who are the key suppliers for low-loss materials in 5G?
  • What is the current status of low-loss materials for 6G?
  • How much area of low-loss material for 5G will be sold between 2023 and 2033?
  • How will sales of low-loss materials evolve by frequency and material type?
  • Which 5G application will drive growth for low-loss materials?
This report provides extensive information and analysis on the major materials, players, and trends for low-loss materials for the 5G and 6G markets.
Material trends for low-loss materials and manufacturer analysis:
  • Identification of incumbent and emerging low-loss materials
  • Analysis of materials used in different applications (i.e. printed circuit boards, filters, antennas, packaging, etc)
  • Benchmarking of dielectric properties of commercialized low-loss materials in different material categories
  • Identification of critical material suppliers for different material categories
  • Discussion of growth drivers and limitations for different material categories in different applications: 5G base stations, 5G smartphone antennas, 5G CPEs
  • Discussion of emerging technologies for 5G and their low-loss materials: antenna-in-package, advanced semiconductor packaging, ink-based EMI shielding, etc
  • Analysis of low-loss materials for 6G and current status
Market Forecasts & Analysis:
  • 10-year granular market forecasts for low-loss materials for 5G, segmented by frequency, application, and material type
  • 10-year market forecasts for low-loss materials for three 5G applications: 5G base stations, CPEs, smartphones
  • Analysis of 5G deployment and material trends for three 5G applications
IDTechEx의 분석가 액세스
모든 보고서 구입에는 전문가 분석가와의 최대 30분의 전화통화 시간이 포함되어, 보고서의 주요 결과를 귀하가 제시하는 비즈니스 문제에 연결하도록 돕습니다. 이 전화통화는 보고서를 구매한 후 3개월 이내에 사용해야합니다.
추가 정보
이 보고서에 대해 궁금한 점이 있으시면 언제든지 research@IDTechEx.com으로 보고서 팀에 문의하거나, 영업 관리자에게 문의하십시오

AMERICAS (USA): +1 617 577 7890
ASIA (Japan): +81 3 3216 7209
ASIA (Korea): +82 10 3896 6219
EUROPE (UK) +44 1223 812300
Table of Contents
1.1.5G, next generation cellular communications network
1.2.Two types of 5G: Sub-6 GHz and mmWave
1.3.Summary: Global trends and new opportunities in 5G/6G
1.4.New opportunities for low-loss materials in mmWave 5G
1.5.Low-loss materials for 5G/6G discussed in this report
1.6.Applications of low-loss materials in semiconductor and electronics packaging
1.7.Evolution of low-loss materials used in different applications
1.8.Evolution of organic PCB materials for 5G
1.9.Benchmark of commercial low-loss organic laminates @ 10 GHz
1.10.Benchmark of LTCC and glass materials
1.11.Benchmarking of commercial low-loss materials for 5G PCBs/components
1.12.Status and outlook of commercial low-loss materials for 5G PCBs/components
1.13.Key low-loss materials supplier landscape
1.14.Summary of market news for low-loss materials
1.15.Summary of product development news and product launches for low-loss materials
1.16.Packaging trends for 5G and 6G connectivity
1.17.Packaging trends for 5G and 6G connectivity
1.18.Benchmark of low loss materials for AiP
1.19.Overview: Redistribution layers in advanced semiconductor packages for 5G smartphones
1.20.IDTechEx outlook of low-loss materials for 6G
1.21.Forecast of low-loss materials for 5G: Area and revenue
1.22.Forecast of low-loss materials for 5G segmented by frequency
1.23.Forecast of low-loss materials for 5G segmented by material type: Revenue and area
1.24.Market discussion: Low-loss materials for 5G
1.25.Market discussion: Low-loss materials for 5G base stations
1.26.Market discussion: Low-loss materials for 5G smartphone antennas
1.27.Market discussion: Low-loss materials for 5G CPEs
2.1.Terms and definitions
2.1.1.IDTechEx definitions of "substrate"
2.1.2.IDTechEx definitions of "package"
2.1.3.Glossary of abbreviations
2.2.Introduction to 5G
2.2.1.Evolution of mobile communications commercial/pre-commercial services (2022), next generation cellular communications network standardization roadmap
2.2.5.Two types of 5G: Sub-6 GHz and mmWave network deployment strategy
2.2.7.Low, mid-band 5G is often the operator's first choice to provide 5G national coverage
2.2.8.Approaches to overcome the challenges of 5G limited coverage commercial/pre-commercial services by frequency mmWave commercial/pre-commercial services (Sep. 2022)
2.2.11.Mobile private networks landscape - By frequency
2.2.12.The main technique innovations in 5G for mobile consumers market overview for industries overview supply chain overview user equipment player landscape for home: Fixed wireless access (FWA) Customer Premise Equipment (CPE)
2.2.19.Summary: Global trends and new opportunities in 5G
2.3.Introduction to low-loss materials for 5G
2.3.1.Overview of challenges, trends, and innovations for high frequency 5G devices
2.3.2.New opportunities for low-loss materials in mmWave 5G
2.3.3.Applications of low-loss materials in semiconductor and electronics packaging
2.3.4.Anatomy of a copper clad laminate
2.3.5.Applications of low-loss materials: Beamforming system in 5G base station
2.3.6.Applications of low-loss materials: PCBs in 5G CPEs
2.3.7.Applications for low-loss materials: mmWave 5G antenna module for smartphones
2.3.8.Applications for low-loss materials: Semiconductor packages
2.3.9.Roadmap of Df/Dk development across all packaging materials for mmWave 5G
3.1.1.Overview of low-loss materials for PCBs and semiconductor packages
3.1.2.Five important metrics impacting low-loss materials selection
3.2.Low-loss organic laminate overview
3.2.1.Electric properties of common polymers
3.2.2.Thermoplastics vs thermosets
3.2.3.Thermoplastics vs thermosets for 5G
3.2.4.Evolution of organic PCB materials for 5G
3.2.5.Innovation trends for organic high frequency laminate materials
3.2.6.Hybrid system: Cost reduction for high frequency circuit boards
3.2.7.Key suppliers for high frequency and high-speed copper clad laminate
3.2.8.Benchmark of commercialised low-loss organic laminates
3.2.9.Benchmark of commercial low-loss organic laminates @ 10 GHz
3.2.10.Other examples of low-loss laminates
3.3.Low-loss thermosets
3.3.1.Strategies to achieve lower dielectric loss and trade-offs
3.3.2.Factors affecting dielectric loss: Polarizability and molar volume
3.3.3.Factors affecting dielectric loss: curing temperature
3.3.4.Strategies to reduce Dk and Df: Low polarity functional groups or atomic bonds
3.3.5.Strategies to reduce Dk and Df: Additives
3.3.6.Strategies to reduce Dk: Bulky structures
3.3.7.Strategies to reduce Dk: Porous structures
3.3.8.Strategies to reduce Df: Rigid structures
3.3.9.Where is the limit of Dk for modified thermosets?
3.3.10.The influence of Dk and substrate choice on PCB feature size
3.3.11.The challenge of thinning the PCB-substrate for high frequency applications
3.3.12.Low-loss thermoset suppliers: Ajinomoto Group's Ajinomoto Build Up Film (ABF)
3.3.13.Low-loss thermoset suppliers: Taiyo Ink's epoxy-based build-up materials
3.3.14.Low-loss thermoset suppliers: Taiyo Ink's epoxy-based build-up materials
3.3.15.Low-loss thermoset suppliers: DuPont's Pyralux laminates
3.3.16.Low-loss thermoset suppliers: Laird's ECCOSTOCK
3.3.17.Low-loss thermoset suppliers: Panasonic's R5410
3.3.18.Low-loss thermoset suppliers: JSR Corp's aromatic polyether (HC polymer)
3.3.19.Low-loss thermoset suppliers: Showa Denko's polycyclic thermoset
3.3.20.Low-loss thermoset laminate suppliers: Mitsubishi Gas Chemical's BT laminate
3.3.21.Low-loss thermoset laminate suppliers: Isola
3.3.22.Low-loss thermoset laminate suppliers: Isola
3.4.Low-loss thermoplastics: Liquid crystal polymers
3.4.1.Liquid crystal polymers (LCP)
3.4.2.LCP classification
3.4.3.LCP antennas in smartphones and FPCBs
3.4.4.Liquid crystal polymer supply chain
3.4.5.Liquid crystal polymer supply chain for printed circuit boards: Companies
3.4.6.LCP types and key suppliers
3.4.7.LCP as an alternative to PI for flexible printed circuit boards
3.4.8.LCP vs PI: Dk and Df
3.4.9.LCP vs PI: Moisture
3.4.10.LCP vs PI: Flexibility
3.4.11.LCP vs MPI: Cost
3.4.12.LCP vs MPI: FCCL signal loss
3.4.13.Commercial LCP and LCP-FCCL products
3.4.14.Next-generation materials for smartphone antennas
3.4.15.Evolution of smartphone antennas from 2G to mmWave 5G
3.4.16.LCP product suppliers: Murata's MetroCirc antennas for smartphones
3.4.17.LCP product suppliers: Career Technology
3.4.18.LCP product suppliers: Avary/ZDT
3.4.19.LCP product suppliers: KGK (Kyodo Giken Kagaku)
3.4.20.LCP product suppliers: SYTECH's LCP-FCCL for mmWave 5G applications
3.4.21.LCP product suppliers: iQLP
3.4.22.LCP product suppliers: IQLP and DuPont's LCP-PCB
3.5.Thermoplastic polymer: PTFE
3.5.1.An introduction to fluoropolymers and PTFE
3.5.2.Key properties of PTFE to consider for 5G applications
3.5.3.Effect of crystallinity on the dielectric properties of PTFE-based laminates
3.5.4.Key applications of PTFE in 5G
3.5.5.Hybrid couplers using PTFE as a substrate
3.5.6.Ceramic-filled vs glass-filled PTFE laminates
3.5.7.Concerns of using PTFE-based laminates for high frequency 5G
3.5.8.PTFE laminate suppliers: Rogers' Advanced Connectivity Solutions
3.5.9.PTFE laminate suppliers: Rogers' ceramic-filled PTFE laminates
3.5.10.PTFE laminate suppliers: Taconic
3.5.11.PTFE laminate suppliers: SYTECH
3.6.Other organic materials
3.6.1.Poly(p-phenylene oxide) (PPO): Sabic
3.6.2.Poly(p-phenylene ether) (PPE): Panasonic's MEGTRON
3.6.3.Modified poly(p-phenylene ether) (mPPE): Asahi Kasei's XYRON
3.6.4.Polyphenylene sulfide (PPS): Solvay's materials for base station antennas
3.6.5.Polyphenylene sulfide (PPS): Toray's transparent, heat-resistant film
3.6.6.Polybutylene terephthalate (PBT): Toray
3.6.7.Hydrocarbon-based laminates
3.6.8.Polymer aerogels as antenna substrates
3.6.9.Aerogel suppliers: Blueshift's AeroZero for polyimide aerogel laminates
3.6.10.Wood-derived cellulose nanofibril
3.6.11.Polycarbonate (PC): Covestro's materials for injection-molded enclosures and covers
3.7.Inorganic materials
3.8.Ceramics/low-temperature co-fired ceramics (LTCC) application areas for ceramics/LTCC
3.8.2.Introduction to ceramic materials
3.8.3.The evolution from HTCC to LTCC
3.8.4.Benchmark of LTCC materials
3.8.5.Dielectric constant: Stability vs frequency for different inorganic substrates (LTCC, glass)
3.8.6.Temperature stability of dielectric parameters of HTCC and LTCC alumina
3.8.7.LTCC suppliers: Ferro
3.8.8.LTCC suppliers: DuPont
3.8.9.LTCC and HTCC-based substrates
3.8.10.HTCC metal-ceramic packages
3.8.11.LTCC substrate for RF transitions
3.8.12.Production challenges of multilayer LTCC package
3.8.13.LTCC suppliers: Kyocera's LTCC-based packages
3.8.14.LTCC suppliers: Kyocera's LTCC-based packages
3.8.15.LTCC suppliers: Kyocera's LTCC-based products and development projects
3.8.16.Need for filter technologies beyond SAW/BAW
3.8.17.Filter technologies compatible with mmWave 5G
3.8.18.Benchmark of selected filter technologies for mmWave 5G applications
3.8.19.Materials for transmission-line filters
3.8.20.Role of LTCC and glass for future RF filter substrates
3.8.21.LTCC suppliers: NGK's multi-layer LTCC filters
3.8.22.LTCC suppliers: Minicircuits' multilayer LTCC filter
3.8.23.LTCC suppliers: Sunway communication's phased array antenna for mmWave 5G phones
3.8.24.LTCC suppliers: Tecdia's thin film and ceramic capacitors
3.9.1.Glass substrate
3.9.2.Benchmark of various glass substrates
3.9.3.Glass suppliers: JSK's HF-F for low transmission loss laminates
3.9.4.Glass suppliers: SCHOTT's FLEXINITY connect
3.9.5.Glass suppliers: AGC/ALCAN System's transparent antennas for windows
3.9.6.Glass as a filter substrate
3.9.7.Glass integrated passive devices (IPD) filter for 5G by Advanced Semiconductor Engineering
3.10.Summary of low-loss materials for PCBs and RF components
3.10.1.Benchmarking of commercial low-loss materials for 5G PCBs/components
3.10.2.Status and outlook of commercial low-loss materials for 5G PCBs/components
3.10.3.Property overview of low-loss materials
3.10.4.Options for mmWave filter substrates
4.1.Overview of electronic and semiconductor packaging
4.1.1.Overview of general electronic packaging
4.1.2.Overview of advanced semiconductor packaging
4.1.3.From 1D to 3D semiconductor packaging
4.1.4.Overview of semiconductor packaging technologies
4.1.5.Packaging trends for 5G and 6G connectivity
4.2.System in package (SiP)
4.2.1.Heterogeneous integration solutions
4.2.2.Overview of System on Chip (SOC)
4.2.3.Overview of Multi-Chip Module (MCM)
4.2.4.System in Package (SiP)
4.2.5.Analysis of System in Package (SiP)
4.2.6.Trend of increasing SiP content in electronics
4.3.Towards AiP (antenna in package)
4.3.1.High frequency integration and packaging trend
4.3.2.Qualcomm: Antenna in package design (antenna on a substrate with flip chipped ICs)
4.3.3.Evolution of Qualcomm mmWave AiP
4.3.4.High frequency integration and packaging: Requirements and challenges
4.3.5.Three methods for mmWave antenna integration
4.3.6.Benchmarking of antenna packaging technologies
4.3.7.AiP development trend
4.3.8.Two types of AiP structures
4.3.9.Two types of IC-embedded technology
4.3.10.Two types of IC-embedded technology
4.3.11.Key market players for IC-embedded technology by technology type
4.3.12.Low loss materials: Key for 5G mmWave AiP
4.3.13.Choices of low-loss materials for 5G mmWave AiP
4.3.14.Benchmark of low loss materials for AiP
4.3.15.Organic materials: the mainstream choice for substrates in AiP
4.3.16.LTCC AiP for 5G: TDK
4.3.17.Glass substrate AiP for 5G: Georgia Tech
4.3.18.Summary of AiP for 5G
4.4.Epoxy molded compounds (EMC) and mold under fill (MUF)
4.4.1.What are EMC and MUFs?
4.4.2.Epoxy Molding Compound (EMC)
4.4.3.Key parameters for EMC materials
4.4.4.Importance of dielectric constant for EMC used in 5G applications
4.4.5.Experimental and commercial EMC products with low dielectric constant
4.4.6.Epoxy resin: Parameters of different resins and hardener systems
4.4.7.Fillers for EMC
4.4.8.EMC for warpage management
4.4.9.Supply chain for EMC materials
4.4.10.EMC innovation trends for 5G applications
4.4.11.High warpage control EMC for FO-WLP
4.4.12.Possible solutions for warpage and die shift
4.4.13.EMC suppliers: Sumitomo Bakelite
4.4.14.EMC suppliers: Sumitomo Bakelite
4.4.15.EMC suppliers: Kyocera's EMCs for semiconductors
4.4.16.EMC suppliers: Samsung SDI
4.4.17.EMC suppliers: Showa Denko
4.4.18.EMC suppliers: Showa Denko's sulfur-free EMC
4.4.19.EMC suppliers: KCC Corporation
4.4.20.Molded underfill (MUF)
4.4.21.MUF critical for flip clip molding technology
4.4.22.Liquid molding compound (LMC) for compression molding
4.5.Ink-based EMI shielding
4.5.1.Electromagnetic interference (EMI) shielding and why it matters to 5G
4.5.2.Challenges and key trends for EMI shielding for 5G devices
4.5.3.Conformal coating growing in popularity
4.5.4.Package-level EMI shielding
4.5.5.Adoption of package-level shielding
4.5.6.Adoption of package-level shielding in smartphones
4.5.7.Which suppliers and elements have used EMI shielding?
4.5.8.Comparison of conformal shielding processes
4.5.9.PVD sputtering
4.5.10.Screen printed EMI shielding: Process and advantages
4.5.11.Spray-on EMI shielding: Process and advantages
4.5.12.Suppliers targeting ink-based conformal EMI shielding
4.5.13.Ink-based EMI shielding suppliers: Henkel
4.5.14.Ink-based EMI shielding suppliers: Duksan
4.5.15.Ink-based EMI shielding suppliers: Ntrium
4.5.16.Ink-based EMI shielding suppliers: Clariant
4.5.17.Ink-based EMI shielding suppliers: Fujikura Kasei
4.5.18.Spray machines used in conformal EMI shielding
4.5.19.Spray-on EMI Shielding: Particle size and morphology choice
4.5.20.Ink formulation challenges: thickness and Ag content
4.5.21.Ink formulation challenges: Thickness and Ag content
4.5.22.Ink formulation challenges: Sedimentation prevention
4.5.23.EMI shielding suppliers: Heraeus' inkjet printed particle-free Ag inks
4.5.24.EMI shielding: Heraeus' inkjet printed particle-free Ag inks
4.5.25.Status of commercial adoption of ink-based solutions
4.5.26.Key trend for EMI shielding: Compartmentalization of complex packages
4.5.27.The challenge of magnetic shielding at low frequencies
4.5.28.The challenge of magnetic shielding at low frequencies
5.1.Redistribution layer (RDL)
5.2.Redistribution layer (RDL) vs silicon
5.3.Importance of low-loss RDL materials for different packaging technologies
5.4.Low-loss RDL materials for mmWave: TSMC's InFO AiP
5.5.Polymer dielectric materials for RDL
5.6.RDL-dielectric suppliers: Toray's polyimide materials
5.7.RDL-dielectric suppliers: DuPont's Arylalkyl polymers
5.8.RDL-dielectric suppliers: DuPont's InterVia
5.9.RDL-dielectric suppliers: HD Microsystems
5.10.RDL-dielectric suppliers: Taiyo Ink's epoxy-based high-density RDL
5.11.RDL-dielectric suppliers: Ajinomoto's nanofiller ABF
5.12.RDL-dielectric supplier: Showa Denko
5.13.Market for low-loss RDLs - Advanced semiconductor packages for 5G smartphones
5.14.Overview: Redistribution layers in advanced semiconductor packages for 5G smartphones
6.1.1.Evolution of mobile communications development and standardization roadmap standardization roadmap spectrum - Which bands are considered?
6.1.5.Spectrum outlook from 2G to 6G
6.1.6.Overview of potential 6G services - An overview of key applications
6.1.8.Overview of land-mobile service applications in the frequency range 275-450 GHz
6.1.9.Summary: Global trends and new opportunities in 6G
6.1.10.Technical innovation comparison between 5G and 6G
6.1.11.IDTechEx outlook of low-loss materials for 6G
6.1.12.Research approaches for 6G low-loss materials by material category
6.1.13.Thermoplastics for 6G: Georgia Tech
6.1.14.PTFE for 6G: Yonsei University, GIST
6.1.15.Thermosets for 6G: ITEQ Corporation, INAOE
6.1.16.PPE for 6G: Taiyo Ink, Georgia Institute of Technology
6.1.17.Silica for 6G: University of Oulu, University of Szeged
6.1.18.Glass for 6G: Georgia Tech
6.1.19.LTCC for 6G: Fraunhofer IKTS
6.1.20.Sustainable materials for 6G: University of Oulu
6.1.21.Metal interposers for 6G: Cubic-Nuvotronics
6.1.22.Roadmap development for low-loss materials for 6G
6.2.Radio-frequency metamaterials for 6G
6.2.1.What is a metamaterial?
6.2.2.Segmenting the metamaterial landscape
6.2.3.Metamaterials for 6G: Reconfigurable intelligent surfaces (RIS)
6.2.4.Key drivers for reconfigurable intelligent surfaces in telecommunications
6.2.5.The current status of reconfigurable intelligent surfaces (RIS)
6.2.6.Key takeaways for RIS
6.2.7.Materials selection for RF metamaterials: Introduction
6.2.8.Operational frequency ranges by application
6.2.9.Comparing relevant substrate materials at low frequencies
6.2.10.Comparing relevant substrate materials at high frequencies
6.2.11.Identifying suitable materials for active RF metamaterials near THz
6.2.12.PP and PTFE show better performance than PET
6.2.13.RIS for 5G/6G: Suitable RF metamaterials
6.2.14.Metamaterials in RIS for 5G/6G: SWOT
7.1.1.Forecast methodology and scope
7.2.Low-loss material forecasts for 5G
7.2.1.Forecast of low-loss materials for 5G: Area and revenue
7.2.2.Forecast of low-loss materials for 5G segmented by material type: Revenue and area
7.2.3.Forecast of low-loss materials for 5G segmented by frequency
7.2.4.Market discussion: Low-loss materials for 5G
7.3.Low-loss material forecasts for 5G infrastructure
7.3.1.Forecast of low-loss materials for 5G base stations segmented by frequency
7.3.2.Forecast of low-loss materials for 5G base stations segmented by material
7.3.3.Market discussion: Low-loss materials for 5G base stations
7.3.4.Forecast of low-loss materials for 5G base stations segmented by components
7.4.Low-loss material forecasts for 5G smartphones
7.4.1.Forecast of low-loss materials for 5G smartphone antennas segmented by frequency
7.4.2.Forecast of low-loss materials for 5G smartphone antennas segmented by material
7.4.3.Market discussion: Low-loss materials for 5G smartphone antennas
7.5.Low-loss material forecasts for 5G customer premises equipment (CPEs)
7.5.1.Forecast of low-loss materials for 5G CPEs segmented by frequency: Area and revenue
7.5.2.Forecast of low-loss materials for 5G CPEs segmented by material: Area and revenue
7.5.3.Market discussion: Low-loss materials for 5G CPEs
9.2.Blueshift Materials
9.3.EnPro Industries
9.4.Chasm Advanced Materials
9.7.Ericsson (2020)
9.8.Ericsson (2021)
9.11.Showa Denko
9.12.Taiyo Ink
10.1.Forecast of low-loss materials for 5G: Area and revenue
10.2.Forecast of low-loss materials for 5G segmented by material type: Revenue and area
10.3.Forecast of low-loss materials for 5G segmented by frequency
10.4.Forecast for low-loss materials for 5G - Segmented by frequency and application
10.5.Forecast of low-loss materials for 5G base stations segmented by components
10.6.Forecast of low-loss materials for 5G base stations segmented by material
10.7.Forecast of low-loss materials for 5G smartphone antennas segmented by material
10.8.Forecast of low-loss materials for 5G CPEs segmented by material: Area and revenue

보고서 통계

슬라이드 362
전망 2033
ISBN 9781915514394

Subscription Enquiry