Research Articles

It is a technological megatrend providing billion dollar business opportunities. The unique new IDTechEx Research report "Smart Materials as Structural Electronics and Electrics 2019-2029" explains how structural materials can be electronically, electrically, mechanically, magnetically and optically smart nowadays.

Advanced Ceramic Fibers (ACF) manufacture specialty fibers for metal, polymer and ceramic matrix composites. Ken Koller (CEO/COO), Shawn Perkins (President), and John Garnier (Founder/CTO) spoke with IDTechEx technology analyst Richard Collins.

This article concerns TactoTek in Oulu Finland and how its technologies can scale up and create billion dollar businesses.

IDTechEx Technology Analyst Dr Nadia Tsao attended the Tissue Engineering and Regenerative Medicine International Society (TERMIS) World Congress 2018. The event was held between September 5 - 7, 2018 at the Kyoto International Conference Center in Kyoto, Japan. The World Congress is held every 3 years - chapter meetings (Europe, Americas, Asia Pacific) are held in the intervening years.

Advances in laser technologies over the past three decades have enabled lasers to progress from specialist scientific instruments to a diverse range of end-user markets. In this article, time periods where data storage and data communication segments dominated the laser diode market are coloured yellow, while the current era of emerging laser diode applications in material processing, sensing and healthcare is indicated by green shading in the charts.

Key areas discussed and displayed at the LCV event include the battery, powertrain, lightweighting, autonomous driving and electric vehicle charging, from not only the technology but also business model and policy perspectives.

IDTechEx Technology Analyst Dr Nadia Tsao attended the Taiwan International 3D Printing Show 2018. The event was held between 29 August - 1 September, 2018 at the Taipei Nangang Exhibition Center.

The CEO of Buzz Technology discusses their distributed manufacturing solution which allows for the creation of more socially conscious consumer products through robotics and 3D printing.

In this article, IDTechEx describe the emerging dynamic between the different QD approaches for displays: edge optic, film-type, color filter type, and on-chip- type. We will examine how, and when, these technologies are likely to commercially rise and fall.

The key next iteration for fiber reinforced polymer products will be the concept of multifunctionality. This is the idea of making a structural part carry out additional role(s) beyond their current primary mechanical task - the market for smart composite material is forecast to exceed 5 kilotons by 2029.

IDTechEx will be hosting a free webinar on Wednesday 26 September titled Progress to the Foldable OLED Display.

IDTechEx will be hosting a free webinar on Tuesday 2 October titled Fuel Cell Vehicles

Technology Analyst, Dr Nadia Tsao, discusses reconstructive skin modelling with Dr Maïté Rielland, L'Oréal, who is focused on bioprinting human skin models for cosmetic evaluation.

After surfacing its Vespa Elettrica concept at EICMA last year, a large motorcycle trade show known for these sort of announcements from manufacturers, Piaggio finally announced that it will go to production this September, and that it will take preorders in October with the first deliveries later that month.

This is a technological megatrend. Dumb load-bearing metal structures move to plastic and composite and incorporate energy harvesting and storage material - massless energy. Indeed you could call some of it negative mass energy. Goodbye components-in-a-box.

Tongtai is an equipment manufacturer based in Taiwan. IDTechEx analyst Nadia Tsao stopped by the Tongtai booth at the Taiwan International 3D Printing Show 2018.

ITO alternative (TCFs) are no longer a young technology. They have been in the semi commercial mode for more than a decade and half. In that time, they have often come tantalising close to success, and in some instances, even carved out niche markets. Yet, they are still hoping for that great breakthrough. So why has the commercialization process been prolonged for so long?

IDTechEx will be hosting a free webinar on Thursday 20 September titled Smart City Opportunities.

IDTechEx will be hosting a free webinar on Tuesday 25 September titled Electric two-wheelers: the EV underdog?

Mothership Aero started at August 2016. Mothership provides a relatively huge airship that might be able to carry heavy payloads and to generate power.

Kray Technologies provide drone spraying of agricultural fields and products.

Embever provide middleware to connect IoT to web applications and apps.

In April 2018, IDTechEx gave a presentation at the world copper conference in Santiago Chile. This was part of work carried out for the International Copper Association to benchmark the commercial status of emerging conductive material. The presentation delivered can be seen below.

The need for flexible, transparent, ultrahigh performance, and low-cost barriers has long held back the promise of many flexible devices. Indeed, for long, it appeared as the grand challenge, and a potential showstopper.

IDTechEx will be hosting a free webinar on Thursday 13 September titled Graphene and Carbon Nanotube (CNT) Commercialization: Past, Present and Future.

The founder of Flexegraph shares information on their nano enhanced fluids and how they function to benefit closed loop cooling systems.

Third Skins CTO explains how this company wishes to use their augmented audio technology, Hy, within day-to-day lives, from conference calling, to finding a location. They hope to bring their product to market before the end of 2018.

In nearly every sector the progression away from "dumb" structural materials is evident.

IDTechEx Research has just published a new report 'Fuel Cell Vehicles 2019-2029'. Fuel cells are commercially successful in stationary applications but commercially unsuccessful in vehicles, beyond a few thousand purchased for material handling vehicles, notably forklifts.

LoC is a device that integrates one or several laboratory functions on a single integrated circuit (commonly called a "chip") to achieve automation and high-throughput screening for PoC.

The new IDTechEx Research report "Global OLED Display Forecasts and Technologies 2019-2029" provides a comprehensive assessment of OLED display technologies and markets based on primary research conducted globally by IDTechEx analysts.

In this article, IDTechEx Research will focus on some of the key frontiers of short-, medium-, and long-term change in quantum dot films. In particular, we will argue that the transition away from Cd based QDs will soon be complete; we will show how QD material improvements are translating into total cost reductions and how that is reshaping the market's pricing strategies; and finally we will consider whether film type QDs can continue their supreme reign, or whether relentless innovation soon render them obsolete.

There are two opposing views on storm survival by the new forms of sea power that are mobile and need no massive concrete and steel infrastructure unlike massive river dams, tidal barrages a offshore conventional wind towers.

The CEO of ViCardio displays how their technology measures beat-to-beat arterial blood pressure, a measurement not normally available outside of intensive care. He explains how his company is unique within the arena of bio-sensors

AWE should be seen as part of a bigger picture. The next generation of zero emission electricity producing technologies has no huge steel and concrete infrastructure, so it can have much less cost and installation time and making it redeployable.

The drone market has boomed in recent years. This is essentially because easy-to-use, reliable and small-sized flying machines have become available at highly accessible prices- well in the range of consumer electronic products. This has created its own demand amongst customers and professional.