Laminar Co., Ltd.

Laminar Co., Ltd.

HQ Country
Korea
Profile
LCTR® means a reactor using a Taylor flow developed by Laminar. The LCTR® is supposed to replace the existing chemical reactors through the production of high-purity substances via a very uniform and powerful mixing effect using a Taylor flow.
The application of our products to the production of graphene and graphene oxide has the following advantages:
 
Decreasing of reaction time (Max 15 min)
Enhancement of productivity via continuous production (1500 ton/yr @ 1 ton reactor)
Reduction of costs via an increase in yields (99.9%, less than 5 layers )
Very simple operating method.
フィルター:
Laminar Co., Ltd.
Company
Topic
Show
 
2018
19 Nov 2018

Electric Vehicle Futures at the IDTechEx Show! Silicon Valley

Many new electric vehicles were on display at the IDTechEx Show! on November 14-15 in Santa Clara, but that was the tip of the iceberg. The event had a hidden message; the future enabling technologies for electric vehicles (EVs) from buses to cars to mining vehicles.
1 Oct 2018

A report from GPEX 2018

IDTechEx attended the Global Power and Energy Exhibition in Barcelona from 17 - 20th September 2018
18 Sep 2018

Multifunctionality is the future for polymer composites

The key next iteration for fiber reinforced polymer products will be the concept of multifunctionality. This is the idea of making a structural part carry out additional role(s) beyond their current primary mechanical task - the market for smart composite material is forecast to exceed 5 kilotons by 2029.
17 Sep 2018

Structural composites as batteries & supercapacitors

A key trend across many sectors is the multifunctionality of structural parts. This has extended to fiber reinforced polymer (FRP) composite material and the added functionality ranges to: enhanced electrical & thermal conductivity, embedded sensors & actuators, energy storage & harvesting, data transmission, self-healing, and adaptive response (morphing) mechanisms.
17 Aug 2018

BrightVolt

BrightVolt, previously know as Solicore, is a single-use solid-state thin film lithium polymer battery company located in Lakeland, Florida. Their main product is Flexion and the main target markets are smart cards and medical devices.
16 Aug 2018

Villinger R&D

Villinger R&D have developed a semi-conductive polymer coating. Markus Villinger (CEO) was interviewed by IDTechEx technology analyst Dr Richard Collins.
25 Apr 2018

Structural Electronics: Silicon on Supercapacitor Has Big Potential

Single crystal silicon photovoltaics will now be very affordable, obsoleting polycrystalline Si PV by having efficiency much higher. Laminating it onto supercapacitor sheeting will form a load bearing material that both makes and stores electricity, delivering it exceptionally fast when needed.
14 Mar 2018

TWI

TWI are an engineering firm that specialize in joining and composite technology. They have recently developed a smart composite that can transmit data through the part without wires using surface waves. IDTechEx technology analyst Dr Richard Collins visited TWI and spoke with Paul Burling (Progamme Manager - Defence).
9 Jan 2018

Roads Generate Electricity for Even the Toughest Tasks

A solar roof on a road will make twice as much electricity per unit area compared to a solar road and be more easily upgraded to affordable higher efficiency PV as it becomes available.
2017
4 Sep 2017

Thermoelectrics: Doors Close; Doors Open

This article covers the challenges companies involved in thermoelectric energy harvesting have faced and possible areas of development in the future.
3 Jul 2017

Acellent Technologies

Acellent Technologies work on the structural health monitoring of composite and metallic parts. Dr Richard Collins interviewed Dr Amrita Kumar (Executive Vice President).
2 Jun 2017

Nature inspired wind turbine

The Aeroleaf is a micro wind turbine developed to capture urban winds, accumulate watts and produce kilowatts.
25 Apr 2017

North Thin Ply Technology

North Thin Ply Technology (NTPT) is a company formed in 2008 that specialize in the thin ply prepregs for composite products. IDTechEx analyst Richard Collins interviewed Joe Summers (Sales and Marketing director).
2016
15 Aug 2016

8Power Energy Harvesting: Electrodynamic, Electrostatic, Piezoelectric

Just two weeks since its creation, IDTechEx visited 8Power in the Cambridge University incubator Ideaspace West.
2015
4 Sep 2015

Advancing materials research into 3D-printed automotive parts

Local Motors and Arizona State University have formed a new partnership to advance materials research into 3D-printed automotive parts, which will be used on the world's first 3D-printed car, scheduled to be on-road in early 2016.
2014
10 Dec 2014

IDTechEx: structural electronics - never heard of it!

Structural electronics is one of the most important developments this century yet most people have never heard of it.
27 Oct 2014

Structural electronics forecast expanded to $97bn by 2025

Structural electronics (SE) is one of the most important emerging technologies this century.
23 Oct 2014

Structural energy storage and integrated photovoltaics

Structural electronics (SE) is one of the most important emerging technologies in this century.
12 Aug 2014

IoT, energy harvesting and storage & printed electronics

Powering the internet of things: simple words to type but not necessarily the simplest of tasks to undertake. This article explores synergies between IoT, energy harvesting and storage and printed electronics.
7 Aug 2014

Internet of Things, energy harvesting & storage & printed electronics

Powering the internet of things: simple words to type but not necessarily the simplest of tasks to undertake.