11 - 12 April 2018 | Estrel Convention Center, Berlin, Germany
Connecting Emerging Technologies With Global Brands

Academic Posters

Poster exhibits are an important aspect of the IDTechEx Show! conference and exhibition. Posters will be featured in the exhibition, where approximately 2,500 visitors are expected.

  Publicity
Best poster will be rewarded with Best Poster Award followed by an article in the relevant IDTechEx on-line Journal

Confirmed posters


Germany
Heidelberg University
Dr Thomas Higgins, Prof Dr Jana Zaumseil
Ambipolar transport properties of printed electrolyte-gated tungsten disulphide nanosheet thin film transistors produced from aqueous inks
UK
Nottingham Trent University
A.S. Satharasinghe, T. Dias and T. Hughes-Riley
Photodiodes embedded in textile yarn sensor
UK
Nottingham Trent University
Dr Dorothy Hardy
Textiles illuminated with electronic yarn
UK
Nottingham Trent University
Theodore Hughes-Riley, Steve Faulkner, Pasindu Lugoda, and Tilak Dias
Temperature sensing textiles for skin temperature monitoring in sport performance
Turkey
Istanbul Technical University
Bedri Utku Baykan
Stretchable and electrically conductive fibres
Germany
Koblenz University of Applied Sciences, RheinAhrCampus
Rashimah Rajah, Ph.D
Managing Cyberloafing in an IoPTS Workplace
Country
Department of Mechanical Engineering, University of Bath
Dr Yan Zhang, Prof. Chris Bowen
Piezoelectric materials for sensing and energy harvesting applications
Country
Karl Otto Braun GmbH & Co. KG, Kaiserslautern University of Applied Sciences
Sabrina Kopf
Smart Bandage: Heating with medical textiles
Lithuania
Kaunas University of Technology
Saulius Grigalevicius, Dain Lo, Chih-Hao Chang and Gintare Krucaite
Blue Aggregation-Induced Emission Materials for Non-Doped Organic Light-Emitting Diodes
Saudi Arabia
Computer Engineering Department, King Fahd Universtiy of Petroleum and Minerals, Dhahran
Muhammad Wasim Raad, Tarek Sheltami
An RFID based Activity of Daily Living for Elderly with Alzheimer's
Taiwan
Taiwan Textile Research Institute (TTRI)
Yu-Chi Wang, Chien-Lung Shen, Tzu-Hao Huang
A Preliminary Evaluation Study of a Wearable Elastic Strain Sensor
Israel
Tel Aviv University
Svetlana Menkin, Dan Schneier, Emanuel Peled, Fernando Patolsky, Diana Golodnitsky, Guy Davidi, Nimrod Harpak, Edna Mados
Novel High-Performance And Low-Cost 3d Silicon Nanostructures Anode For Lithium-Ion Batteries
Denmark
SDU Nanosyd, Mads Clausen Institute, University of Southern Denmark
Elodie Destouesse, Ala Cajocaru, Jani Lamminaho, Horst-Günter Rubahn, Morten Madsen
Flexible barrier foil with embedded ZnO CSP for slot-die coated organic solar cells
Ireland
Tyndall National Institute
Suzanne O'Callaghan, Marco Belcastro, Brendan O'Flynn, Paul Galvin, Conor O'Mahony - Tyndall National Institute, Ireland.
Frank Everaerts, Jeroen Schram - Holst Centre, Eindhoven, Netherlands
Mark Fleming, Ray O'Brien - Fleming Medical Ltd., Limerick, Ireland.
Dermatrax: Development of a Bluetooth-enabled Wound Dressing with onboard temperature and moisture sensing
Germany
Fraunhofer Institute for Ceramic Technologies and Systems IKTS; *Helmholtz-Zentrum Dresden-Rossendorf
M. Vinnichenko, M. Fritsch, D. Makarov*, N. Trofimenko, V. Sauchuk, and M.Kusnezoff
Innovative laser processing of inkjet-printed layers
Saudi Arabia
King Fahd University
Dr. MuhammedWassim Raad, MarquosSamuel, Ali Alquraini, Khalid Alhussain
IoTSchool Bus forTracking and Security title
Country
University of Chemical Technology and Metalurgy - Sofia
Eng. Kosta Shterev, Assoc. Prof. Tatyana Bozhkova, Assoc. Prof. Iskren Spiridonov, PhD
Overview of Security Printing and the implementation of Printed Electronics in it
UK
Manchester School of Art, MMU
Mark Beecroft
Digital Interlooping: 3D printing of weft-knitted textile based tubular structures using selective laser sintering of nylon powder
Israel
Tel Aviv University
Svetlana Menkin, Dan Schneier, Emanuel Peled, Fernando Patolsky, Diana Golodnitsky, Guy Davidi, Nimrod Harpak, Edna Mados
Silicon Nanostructures (SiNS) anode for high energy lithium ion Batteries
UK
De Montfort University
Shashi Paul, Krishnna Nama Manjunatha, Sridhar Govindarajan
Growth of Low Temperature Silicon Nanowires for Energy and Electronic Devices
Country
R&D Center for Low-Cost Plasma and Nanotechnology Surface Modifications, Masaryk University
Tomáš Homola, Richard Krumpolec
Roll-to-roll atmospheric plasma processing of surfaces and nanostructured coatings
Country
R&D Center for Low-Cost Plasma and Nanotechnology Surface Modifications, Masaryk University
Richard Krumpolec, Tomáš Homola
Atmospheric dry hydrogen plasma reduction and selective etching of flexible graphene electrodes and polymeric foils
Israel
Technion - Israel Institute of Technology
Walaa Saliba, Morad Nakhleh, Raneen Jeries, Falk Fish and Hossam Haick
Detection Of Tuberculosis From Exhaled Breath Using Nanomaterial-Based Sensors
Australia
Deakin University
Shayan Seyedin, Sepehr Moradi, Charanpreet Singh, Joselito M. Razal
Conductive Elastomer Fibres for Wearable Strain Sensing Textiles
Germany
Technical University of Dresden - Chair of Microsystems University of Maryland College Park - Department of Aerospace
Maxim Germer, Uwe Marschner, Alison Flatau
Magnetic flux analysis of a magnetostrictive unimorph energy harvester
Netherlands
Eindhoven University of Technology
Jeroen Knippenberg, Joris Remmers, Pascal Etman, Marc Geers
Process modelling of hybrid additive manufacturing with integrated electronics
Germany
Paderborn University
Dennis Drude, Marcel Schönhoff, Ulrich Hilleringmann
Modular thermoelectric generator for universal industrial waste heat recovery
UK
De Montfort University
Iulia Salaoru, Salah Maswoud
Inkjet Printing of Flexible Electronic Memory Devices
Saudi Arabia
King Fahd University
Hamed Alsakkaf, Abulqader Bin Hafeedh, Awadh Bahumran, Hussein Almasawa, Khaled Bin Jofan, Moemen Salem, Dr. Mohammad Wasim Raad
Smart Gloves: Physical therapy Assistant for Elderly with RFID Technology
Acondicionamiento Tarrasense Leitat
Sandra Martinez
Sustainable, Wireless, Autonomous Nanocellulose-based Quantitative DoA Biosensing Platform
Austria
Joanneum Research Forschungsgesellschaft mbH
Alexander Blümel, Pufinji Obene, Christine Boeffel, John Stark, Martin Mischitz, Juan Gemio, Susanne Resch, Andrew Morrison, Pietro Chirico, Auke Kronemeijer, Gil Bernstein Toker, Tung Huei Ke, Carlos Fornies
INSPIRED - INdustrial Scale Production of Innovative nanomateRials for printEd Devices
IES, Univ Montpellier, CNRS, Montpellier, France
Benjamin Saggin, Yassin Belaizi, D. Mottet, S. Pla, K. Bakhti, S. Fazilleau, Arnaud Vena, Brice Sorli
Low cost NFC sensor-RFID wristband used to determine Metabolic Equivalent of Task
Germany
Technical University of Applied Sciences Wildau
Helge Lux, Peter Siemroth, Matthias Edling, Sigurd Schrader
Ultra-fast synthesis of Graphene on poly-crystalline metal foils
Austria
AIT Austrian Institute of Technology GmbH
Rainer Hainberger AIT, DPI Holding GmbH, Infineon Technologies Austria AG, Maurer Services GmbH, Melecs EWS GmbH, Papiertechnische Stiftung, R-Biopharm AG, Ricoh UK Products Ltd, Saralon GmbH, Schoeller Technocell GmbH & Co KG, Gwent Electronic Materials Limited, Technical University Chemnitz
High Resolution Electrostatic Jet Printing of Copper Nanoparticle Based Inks
Portugal
Institute of Systems and Robotics, University of Coimbra
Mahmoud Tavakoli, Carmel Majidi
Electronic Tattoos enabled by Inkjet printing of a novel room temperature sintered stretchable ink
Austria
Joanneum Research Forschungsgesellschaft mbH
Alexander Blümel, Pufinji Obene, Christine Boeffel, John Stark, Martin Mischitz, Juan Gemio, Susanne Resch, Andrew Morrison, Pietro Chirico, Auke Kronemeijer, Gil Bernstein Toker, Tung Huei Ke, Carlos Fornies
High Resolution Electrostatic Jet Printing of Copper Nanoparticle Based Inks
Sweden
The Swedish School of Textiles, University of Borås
Veronica Malm, Fernando Seoane, Vincent Nierstrasz
Fused deposition modelling - Towards 3D printed electrodes on fabric for surface electromyography (sEMG)
UK
University of Cambridge
Toby P. Call, Tian Carey, Paolo Bombelli, David J. Lea-Smith, Philippa Hooper, Christopher J. Howe and Felice Torrisi
Platinum-free, graphene based anodes and air cathodes for single chamber microbial fuel cells

The €295 Academic Poster rate includes:

  • A poster display in the exhibition hall
  • A full 2 day pass to the conference and exhibition
  • Lunch and drinks
  • Entry into the best poster in show award

Requirements

Poster session applicants must be teaching or studying full-time. More than one academic can submit a poster. If you have any queries regarding the criteria please contact us.

The poster authors need to be beside their poster during lunch breaks on 11-12 April.

All posters will be entered into the IDTechEx Show! Best Poster Award. The poster winner will be announced during the drinks reception on the evening of 11 April and featured widely in publicity afterwards.

Submission of Abstracts

If you are interested in displaying a poster at the event please email Kimberly Smith at k.smith@idtechex.com with your contact details, a title and 500 word abstract by 16 March. If your submission is successful we will email you with details on the poster session and guidelines for producing your poster.

Download submission form

Contacts


Ms Kimberly Smith

k.smith@idtechex.com

+44 (0)1223 810200