Laminar Co., Ltd.

Laminar Co., Ltd.

HQ Country
Korea
Profile
LCTR® means a reactor using a Taylor flow developed by Laminar. The LCTR® is supposed to replace the existing chemical reactors through the production of high-purity substances via a very uniform and powerful mixing effect using a Taylor flow.
The application of our products to the production of graphene and graphene oxide has the following advantages:
 
Decreasing of reaction time (Max 15 min)
Enhancement of productivity via continuous production (1500 ton/yr @ 1 ton reactor)
Reduction of costs via an increase in yields (99.9%, less than 5 layers )
Very simple operating method.
Filtered by:
Laminar Co., Ltd.
Company
Topic
Show
 
2011
21 Jul 2011

Interview with Leyden Energy

IDTechEx Technology Analyst Harry Zervos interviewed Leyden Energy's Aakar Patel, discussing the company's battery technology, the attributes that make it a technology that's attracting the interest of consumer electronic, smart grid and EV developers as well as the company's prospects and aims for the future.
2 Jun 2011

Electric vehicles become electronic

About 80% of the value of a military jet aircraft lies in the circuitry, up from almost nothing a century ago. Civil airliners are about 50% electric and electronic, whereas the family car is around 30% so far, all these percentages steadily rising. The point is that an aircraft has far more than the radar, communications and other instruments accessed by the pilot: it is a sea of sensors, fuel controls and servo systems in the engines, wings and elsewhere. Even the family car adds much more than the satnav, phone, proximity sensors and other electronics directly assisting the driver, the MEMS accelerometer controlling the air bags being just one of an increasingly huge number of out-of-sight safety and other measures controlled by circuitry.
30 May 2011

Goodbye 100 mile range electric vehicles

150 miles range is the new benchmark for affordable electric vehicles: the 100 miles range of today's pure electric vehicles will quickly become an embarrassment.
20 Apr 2011

Electric Vehicles for Military, Security and Police - Land, Water, Air

This article shares some of the research carried out for the new IDTechEx report, "Electric Vehicles, Military, Security, Police 2011-2021".
9 Mar 2011

Printed electronics - Europe is different

Printed electronics is one of the most important new enabling technologies.
21 Feb 2011

Paper electronics ready for prime time

The term paper electronics refers to electronic and electric circuits printed onto paper - increasingly both at the same time. Paper electronics has its origins in the screen printing of electrodes onto battery separators for cylindrical batteries and it has been used for conductors and sensors in such things as T-Ink toys and novelties.
19 Jan 2011

Smart Skin for Land, Sea and Air Vehicles

Cars that glow in the dark and have far more passenger space, aircraft and submarines that monitor their complete outer surface, military vehicles that destroy missiles that hit them. The common factor here is smart skin.
2010
3 Nov 2010

Wireless electric vehicles

At the unique IDTechEx event, "Future of Electric Vehicles" in San Jose USA December 7-8, these "sea changes" will be tracked by the experts involved in land, air and, yes, seagoing electric vehicles.
7 Oct 2010

Sakti3 Third generation batteries backed

Earlier this year, the University of Michigan traction battery spinoff Sakti3, inc. announced $7 million in second round of venture funding led by capital firm Beringea, in addition to Khosla. Now G.M. Ventures has invested $3.2 Million in the company. Vloet/University of Michigan Professor Ann Marie Sastry of the University of Michigan is chief executive of Sakti3.
6 Oct 2010

New electric planes take off

It seems back to front but the unmanned pure electric aircraft have often been huge, including the AeroVironment and Aurora Flight Sciences vehicles that cruise to upper atmosphere on solar energy carrying out surveillance.
5 Oct 2010

Many ways to harvest energy from shock absorbers

In the new age of the electric vehicle, almost everything has to be rethought.
24 Aug 2010

Infinite Power Solutions raises $20 million in funding

Infinite Power Solutions, Inc has successfully completed its series C round of financing—raising $20 million. The new capital will be used to expand the company's manufacturing capacity, accelerate the build out of its global sales channels and further support advanced research and development of its eco-friendly, THINERGY® solid-state rechargeable energy storage devices.
19 Jul 2010

Report on Hybrid and Electric Vehicles Event

Dr Peter Harrop reports back on the Hybrid and Electric Vehicles conference - Powertrain development, technology and trends
22 Jun 2010

Major new advances in energy harvesting

There have been concerns about the limitations of the various energy harvesting technologies which might explain the modest success of energy harvesting in electronics beyond the widespread use of photovoltaics.
16 Jun 2010

Electric Vehicles- The Clever Ten Year Strategies

The electric vehicle business is over $33 billion today at ex factory prices but cars are less than half of that. As the market nearly quintuples over the next ten years, cars will rise to nearly 55% of the business but the devil is in the detail...
28 May 2010

Some impressions of Energy Harvesting Europe

The IDTechEx Energy Harvesting Europe event in Munich had its first day on 26 May. Here are some impressions from the first day.
20 May 2010

Laminar batteries are better

Laminar batteries are increasingly adopted in electronics because they have better cooling, damage tolerance and performance in respect of charge and discharge speed when optimally designed for this shape. Companies such as Cymbet and Infinite Power Solutions already supply small laminar lithium batteries for such applications as backup power for electronics and some even continue to operate if a nail is driven through them.
6 May 2010

IDTechEx exhibiting at SID later this month

Visit IDTechEx at our booth at SID (1309), where you will have a chance to speak with the IDTechEx team as well as the opportunity to discuss specific developments with our analysts.
24 Mar 2010

The truly integrated circuit is printed and flexible

For 40 years, so called integrated circuits have integrated little more than transistors, diodes and sensors onto one piece of material but now there are much more integrated circuits arriving where most electrical and electronic components are co-deposited on flexible substrates. Those flexible substrates are key, because this new electronics will be affordable and desirable on everything from apparel to human skin and electrical and consumer packaged goods, where surfaces are only rarely flat.
15 Mar 2010

Printing large batteries

170 years ago, Faraday appreciated the different electrical properties of nano gold over bulk metal in electrical devices, so applying nanotechnology to these things is scarcely new. However, the huge sums now being applied to improvement of lithium traction batteries in particular are now leading to work on a much larger scale and thin film technology, nanotechnology and printing are in increasingly important part of this.