Materials for Bone Implants 2026-2036: Trends, Players, and Forecasts

Granular ten-year hip and knee replacement market forecasts, regional analysis, price benchmarking, materials and design trend tracking. Primary interviews with key players in the market.

Show All Description Contents, Table & Figures List FAQs Pricing Related Content
Joint replacement is primarily used to surgically treat severe osteoarthritis (OA), which is on the rise due to an aging population and increasing obesity rates. OA is one of the most disabling diseases in developed countries and represents a growing global healthcare burden. OA most frequently affects the knee, followed by the hand and the hip. The hip and knee replacement implant market will approach US$34 billion by 2036. A relatively low CAGR of 4.6% is representative of the conservative nature of the medtech sector.
 
The IDTechEx report, "Materials for Bone Implants 2026-2036: Trends, Players & Forecasts", provides a comprehensive analysis of the hip and knee replacement market and a detailed assessment of the materials used for bone implants. The coverage includes but is not limited to: a dissection of the macroscopic and microscopic market drivers for implant adoption, a quantitative benchmarking of leading manufacturers and their products, a regional analysis of clinical heritage and implant pricing, a full characterization of the metals, ceramics, polymers, ceramicized metal and coating materials used for bone implants, and an outlook of the market size, implant adoption, and the trend of materials selection.
 
Hip replacement, hip arthroplasty, knee replacement, knee arthroplasty, orthopedic implant, bone implant, implant material, hip resurfacing
Market size of hip and knee replacement implant. Source: IDTechEx.
 
Surgeon preference heavily influences implant adoption
Surgeons are the primary customers in the hip and knee implant market. They make the ultimate decision on treatment plans and what implant to use. While their decisions are influenced by healthcare system guidelines, they retain significant autonomy. Surgeons need to consider individual patient conditions and risk factors to choose the best care option that minimizes the chance of revision and maximizes patient satisfaction. As a result, they tend to be more cautious towards new implants and techniques without a significant history of clinical success.
 
A defining feature of orthopedic surgery identified in this report is apprenticeship-based training. Surgeons are not only taught how to perform procedures but also which implant to trust. Therefore, all OEMs need experienced surgeons to champion their products and innovative design philosophies, especially for newer products. Establishing a collaborative relationship with key opinion leaders in the field is crucial to drive production adoption, regardless of the size of the company. For startups, having seasoned industry veterans on the board who understand the pain points of surgeons can greatly increase their chance of success.
 
Titanium alloys will remain the mainstay material
According to IDTechEx's extensive research of the market, Ti-6Al-4V alloy is the current gold standard for use in weight-bearing, tissue interfacing implant components due to its superior biocompatibility, strength-to-density ratio and corrosion resistance. It is also heavily used in implant coatings because of its proven osteoconductive (bone bonding) properties. Although osteoconductivity is not unique to titanium, it is still the most favored owing to the cost efficiency. Its suitability for power bed fusion additive manufacturing further enables its use in porous implants and custom-made implants. Therefore, the versatility of titanium alloys will strengthen its position as the dominant metallic material.
 
The key limitations of titanium alloys are the potential to cause stress shielding and the poor wear resistance. Stress shielding is a common concern for all implant materials with stiffness significantly higher than the bone. In the long term, this will lead to increased use of fully porous implants and alternative polymeric materials which have bone-like mechanical properties. Although titanium alloys are not suitable for implant components with articulating surfaces, the wear resistance can be improved via nitriding to create ceramicized titanium. This material will see increased adoption and broaden the application of titanium alloys.
 
Ceramic materials will play a bigger role in implant manufacturing
Engineered ceramics with extremely high wear resistance and enhanced toughness are increasingly used in implant components with articulating surfaces that experience compressive loading. The main competing materials are Cobalt-Chromium (CoCr) alloys which have lower wear resistance but higher toughness. However, CoCr is often associated with metal ion release concerns, limiting its use in patients with metal sensitivity. Therefore, ceramics are gradually replacing CoCr in the manufacture of hip femoral heads. Further benchmarking of the properties of competing materials is provided in this study.
 
Ceramic coating can be an alternative solution to the tradeoff between ceramic fracture toughness and metal ion release. Common coating materials include titanium nitride, titanium niobium nitride and zirconium nitride. The coating can prevent the release of metal ions from metallic substrates which possess desirable toughness. In addition, ceramic coating materials have significantly higher hardness compared to most metals, rendering the implant more wear resistant. Currently, ceramic coating is still a niche segment, but steady increase in market share can be expected due to its ease of manufacturing and low cost.
 
Key aspects
This report provides critical market intelligence about the hip and knee replacement market with a focus on implant materials. This includes:
 
In-depth market analysis of hip and knee replacement implants
  • Analysis of the macroscopic and microscopic market drivers of hip and knee replacements including aging population and surgeon preference.
  • Review of regional variations in implant adoption rate, clinical heritage, design philosophy preference, and surgical robotics use.
  • Deep dive into the products of the four leading manufacturers of knee and hip replacement implants: Zimmer Biomet, Stryker, DePuy Synthes (Johnson & Johnson) and Smith & Nephew, with further coverage of 20 other manufacturers in the US, Europe, and Asia.
  • Quantitative benchmarking of implant prices at different regions, including the US, the UK, and China.
  • Overview of the different approaches adopted by players on materials innovation and IP management.
 
Detailed assessment of the materials used for bone implants
  • Full characterization and benchmarking of materials used for hip and knee implants in terms of materials properties, clinical performance, and cost.
  • Review of different types of porous materials used in hip and knee implants for cementless biological fixation, including additive manufactured, plasma sprayed, sintered, and vapor deposited.
  • Discussion of market trends in materials of knee and hip replacements gathered via primary company interviews, including the increased use of ceramics, ceramicized metals, antibacterial coating and HXPE, and the emerging use of PEEK (polyetheretherketone).
  • Review of the benefits and limitations of different implant designs, including variations in fixation method, coating, and morphology.
  • Overview of other bone implants including spine and extremities joint replacement, including the use of alternative non-metallic materials.
 
Forecast of the hip and knee replacement market
  • Market forecasts for hip and knee replacements from 2026 to 2036 segmented into regions, including methodologies and assumptions.
  • Outlook of the change in materials selection for the manufacturing of hip and knee replacement implants.
Report MetricsDetails
CAGRThe global market for hip and knee replacements will approach US$34 billion by 2036, growing at a CAGR of 4.6%.
Forecast Period2026 - 2036
Forecast UnitsVolume (units), Revenue (US$)
Regions CoveredWorldwide, North America (USA + Canada), Europe, All Asia-Pacific
Segments CoveredHip replacement/arthroplasty, knee replacement/arthroplasty
Analyst access from IDTechEx
All report purchases include up to 30 minutes telephone time with an expert analyst who will help you link key findings in the report to the business issues you're addressing. This needs to be used within three months of purchasing the report.
Further information
If you have any questions about this report, please do not hesitate to contact our report team at research@IDTechEx.com or call one of our sales managers:

AMERICAS (USA): +1 617 577 7890
ASIA (Japan and Korea): +81 3 3216 7209
EUROPE (UK) +44 1223 812300
1.EXECUTIVE SUMMARY
1.1.Type of synthetic orthopedic implants
1.2.Introduction to hip and knee replacements
1.3.Key market drivers for joint replacements
1.4.Zimmer Biomet
1.5.Stryker
1.6.DePuy Synthes
1.7.Smith & Nephew
1.8.Chinese manufacturers and prices
1.9.Other manufacturers
1.10.Common materials used in hip and knee implants
1.11.Ceramic materials and manufacturers
1.12.Porous metallic implant designs
1.13.Trends in implant morphology
1.14.Hip resurfacing is coming back
1.15.Materials outlook for hip and knee replacements
1.16.Other Orthopedic implants
1.17.Global market share forecast of hip and knee replacements
1.18.Access more with an IDTechEx subscription
2.FORECAST
2.1.Methodology and assumptions
2.2.Number of hip and knee replacements
2.3.Market size of hip and knee replacements
2.4.Number of hip replacements by region
2.5.Market size of hip replacements by region
2.6.Number of knee replacements by region
2.7.Market size of knee replacements by region
2.8.Combined number of hip and knee replacements by region
2.9.Total market size of hip and knee replacements by region
2.10.Global market share forecast of hip and knee replacements
3.OVERVIEW OF HIP AND KNEE REPLACEMENT MARKET
3.1.1.Introduction to orthopedic implants
3.1.2.Type of synthetic orthopedic implants
3.1.3.Introduction to hip replacements
3.1.4.Introduction to knee replacements
3.2.Key market drivers and regional analysis
3.2.1.Osteoarthritis
3.2.2.Aging population
3.2.3.Obesity
3.2.4.Surgeons are the customers in orthopedics
3.2.5.Clinical heritage decides implant adoption
3.2.6.Global market for joint replacements
3.2.7.US joint replacement market
3.2.8.European joint replacement market
3.2.9.CE Mark is more costly to obtain
3.2.10.Asian joint replacement market
3.2.11.Leading manufacturers
3.2.12.Chinese manufacturers and prices
3.2.13.Other manufacturers
3.2.14.Implant prices in the US
3.2.15.Implant prices in the UK
3.2.16.Growth-share matrix for joint replacement markets
4.ZIMMER BIOMET
4.1.1.Introduction - Zimmer Biomet
4.1.2.Financial
4.1.3.Summary
4.2.Zimmer Biomet - Hip
4.2.1.Z1 hip stem
4.2.2.Avenir Complete hip stem
4.2.3.Echo hip stems
4.2.4.Taperloc Complete hip stems
4.2.5.Arcos femoral revision system
4.2.6.Wagner SL Revision hip stems
4.2.7.Highly crosslinked polyethylene
4.2.8.G7 acetabular shells
4.2.9.Triflange acetabular component
4.2.10.Trabecular Metal technology
4.2.11.Iodine Technology
4.3.Zimmer Biomet - Knee
4.3.1.Persona knee system
4.3.2.Persona revision and partial knee
4.3.3.Vanguard primary and revision knee system
4.3.4.NexGen complete knee solution
4.3.5.NexGen revision knee
4.3.6.Limb salvage systems
4.3.7.Oxford partial knees
4.3.8.Gender Solutions patellofemoral replacement
4.3.9.Tapestry Biointegrative implant
5.STRYKER
5.1.1.Introduction - Stryker
5.1.2.Financial 2020-2024
5.1.3.Financial Analysis
5.1.4.Stryker Summary
5.2.Stryker - Hip
5.2.1.Insignia hip stem
5.2.2.Secur-Fit Advanced hip stem
5.2.3.Accolade II hip stem
5.2.4.Restoration Modular revision hip stem
5.2.5.Exeter hip stem
5.2.6.Trident II acetabular shell
5.2.7.Trident acetabular shell
5.2.8.Modular dual mobility acetabular shell
5.2.9.Novae (SERF SAS) dual mobility acetabular shell
5.2.10.Acetabular shell liners and heads
5.2.11.X3 HXPE liner for hips and knees
5.3.Stryker - Knee
5.3.1.Triathlon knee
5.3.2.Triathlon Tritanium cementless knee
5.3.3.Triathlon TS revision knee
5.3.4.Triathlon Hinge revision knee
5.3.5.Global Modular Replacement System (GMRS)
5.3.6.Restoris MCK partial knee
6.DEPUY SYNTHES
6.1.1.Introduction - DePuy Synthes
6.1.2.Financial
6.1.3.Summary
6.2.DePuy Synthes - Hip
6.2.1.Actis hip stem
6.2.2.Summit tapered hip stem
6.2.3.Tri-Lock bone preservation stem & C-Stem AMT stem
6.2.4.Corail and Emphysis hip stems
6.2.5.Reclaim revision stems
6.2.6.Pinnacle acetabular shell
6.2.7.Emphasys acetabular shells
6.2.8.Bi-Mentum dual mobility
6.2.9.Permallon Avant ceramic heads
6.3.DePuy Synthes - Knee
6.3.1.Attune knee system
6.3.2.Attune cementless knee
6.3.3.Attune revision knee
6.3.4.Hinged knee and limb salvation
7.SMITH & NEPHEW
7.1.1.Introduction - Smith & Nephew
7.1.2.Financial
7.1.3.Summary
7.2.Smith & Nephew - Hip
7.2.1.Anthology hip stem
7.2.2.Polarstem hip stem
7.2.3.Catalystem hip stem
7.2.4.Redapt revision hip stem and shell
7.2.5.Birmingham hip resurfacing
7.2.6.R3 acetabular shells
7.2.7.Oxinium - ceramicized zirconium
7.3.Smith & Nephew - knee
7.3.1.Legion Knee
7.3.2.Journey II knee
8.TRENDS IN HIP AND KNEE REPLACEMENT MARKET
8.1.The rise of ambulatory/outpatient surgical centers
8.2.Cementless fixation is gaining popularity
8.3.Hip resurfacing: Renaissance (1/2)
8.4.Hip resurfacing: Renaissance (2/2)
8.5.Additive manufacturing: Hip acetabular shells
8.6.US - trend in hip replacements
8.7.US - trend in knee replacements
8.8.UK - trend in hip replacements
8.9.UK - trend in knee replacements
8.10.Hip replacement: Ceramic-on-ceramic (CoC) v. ceramic-on-polyethylene (CoP)
8.11.Dual mobility hip acetabular component
8.12.Trends in implant morphology
8.13.Ireland is a leading manufacturing hub
8.14.Managing IP: Two approaches
8.15.Surgical robotics are gaining popularity
8.16.Surgical robotics: Mako by Stryker
8.17.Implantable knee shock absorber
9.MATERIALS FOR HIP AND KNEE REPLACEMENTS
9.1.Implant failure reasons and material solutions
9.2.Cemented fixation and bone cement
9.3.Porous metallic materials used by leading manufacturers
9.4.Titanium v. Tantalum
9.5.Common materials used in hip and knee implants
9.6.Mechanical properties of common implant materials
9.7.All-polyethylene knee tibia
9.8.All-polyethylene hip cup
9.9.PEEK knee femoral component
9.10.Ceramic materials (1/2)
9.11.Ceramic materials (2/2)
9.12.Biolox Delta ceramic
9.13.Biolox delta implant components
9.14.Ceramic coatings
9.15.Ceramicized metal
9.16.Anti-bacterial coating (1/2)
9.17.Anti-bacterial coating (2/2)
9.18.Surface treated polyethylene
9.19.Additive manufacturing
9.20.Powder bed fusion additive manufacturing
9.21.Porous metallic implant designs
10.OTHER ORTHOPEDIC IMPLANTS
10.1.Spine
10.1.1.Spine conditions that require implants
10.1.2.Types of spine implants
10.1.3.Materials for spinal cages
10.1.4.Expandable spinal cages
10.1.5.Biologics for spinal fusion
10.1.6.Artificial discs
10.1.7.Total posterior spine (TOPS) system
10.1.8.Trend of spinal implant in the US
10.2.Extremities
10.2.1.Extremities joint replacement
10.2.2.Shoulder joint replacement
10.2.3.Elbow joint replacement
10.2.4.Wrist joint replacement
10.2.5.Hand anatomy
10.2.6.Finger joint replacement and materials
10.2.7.Ankle joint replacement
10.2.8.Big toe joint replacement
10.2.9.Extremities market and material trends
11.COMPANY PROFILES
11.1.Access to company profiles on the IDTechEx portal
 

About IDTechEx reports

What are the qualifications of the people conducting IDTechEx research?

Content produced by IDTechEx is researched and written by our technical analysts, each with a PhD or master's degree in their specialist field, and all of whom are employees. All our analysts are well-connected in their fields, intensively covering their sectors, revealing hard-to-find information you can trust.

How does IDTechEx gather data for its reports?

By directly interviewing and profiling companies across the supply chain. IDTechEx analysts interview companies by engaging directly with senior management and technology development executives across the supply chain, leading to revealing insights that may otherwise be inaccessible.
 
Further, as a global team, we travel extensively to industry events and companies to conduct in-depth, face-to-face interviews. We also engage with industry associations and follow public company filings as secondary sources. We conduct patent analysis and track regulatory changes and incentives. We consistently build on our decades-long research of emerging technologies.
 
We assess emerging technologies against existing solutions, evaluate market demand and provide data-driven forecasts based on our models. This provides a clear, unbiased outlook on the future of each technology or industry that we cover.

What is your forecast methodology?

We take into account the following information and data points where relevant to create our forecasts:
  • Historic data, based on our own databases of products, companies' sales data, information from associations, company reports and validation of our prior market figures with companies in the industry.
  • Current and announced manufacturing capacities
  • Company production targets
  • Direct input from companies as we interview them as to their growth expectations, moderated by our analysts
  • Planned or active government incentives and regulations
  • Assessment of the capabilities and price of the technology based on our benchmarking over the forecast period, versus that of competitive solutions
  • Teardown data (e.g. to assess volume of materials used)
  • From a top-down view: the total addressable market
  • Forecasts can be based on an s-curve methodology where appropriate, taking into account the above factors
  • Key assumptions and discussion of what can impact the forecast are covered in the report.

How can I be confident about the quality of work in IDTechEx reports?

Based on our technical analysts and their research methodology, for over 25 years our work has regularly received superb feedback from our global clients. Our research business has grown year-on-year.
 
Recent customer feedback includes:
"It's my first go-to platform"
- Dr. Didi Xu, Head of Foresight - Future Technologies, Freudenberg Technology Innovation
 
"Their expertise allows us to make data-driven, strategic decisions and ensures we remain aligned with the latest trends and opportunities in the market."
- Ralf Hug, Global Head of Product Management & Marketing, Marquardt

What differentiates IDTechEx reports?

Our team of in-house technical analysts immerse themselves in industries over many years, building deep expertise and engaging directly with key industry players to uncover hard-to-find insights. We appraise technologies in the landscape of competitive solutions and then assess their market demand based on voice-of-the-customer feedback, all from an impartial point of view. This approach delivers exceptional value to our customers—providing high-quality independent content while saving customers time, resources, and money.

Why should we pick IDTechEx research over AI research?

A crucial value of IDTechEx research is that it provides information, assessments and forecasts based on interviews with key people in the industry, assessed by technical experts. AI is trained only on content publicly available on the web, which may not be reliable, in depth, nor contain the latest insights based on the experience of those actively involved in a technology or industry, despite the confident prose.

How can I justify the ROI of this report?

Consider the cost of the IDTechEx report versus the time and resources required to gather the same quality of insights yourself. IDTechEx analysts have built up an extensive contact network over many years; we invest in attending key events and interviewing companies around the world; and our analysts are trained in appraising technologies and markets.
 
Each report provides an independent, expert-led technical and market appraisal, giving you access to actionable information immediately, rather than you having to spend months or years on your own market research.

Can I speak to analysts about the report content?

All report purchases include up to 30 minutes of telephone time with an expert analyst who will help you link key findings in the report to the business issues you're addressing. This needs to be used within three months of purchasing the report.

What is the difference between a report and subscription?

A subscription from IDTechEx can include more reports, access to an online information platform with continuously updated information from our analysts, and access to analysts directly.

Before purchasing, I have some questions about the report, can I speak to someone?

Please email research@idtechex.com stating your location and we will quickly respond.

About IDTechEx

Who are IDTechEx's customers?

IDTechEx has served over 35,000 customers globally. These range from large corporations to ambitious start-ups, and from Governments to research centers. Our customers use our work to make informed decisions and save time and resources.

Where is IDTechEx established?

IDTechEx was established in 1999, and is headquartered in Cambridge, UK. Since then, the company has significantly expanded and operates globally, having served customers in over 80 countries. Subsidiary companies are based in the USA, Germany and Japan.

Questions about purchasing a report

How do I pay?

In most locations reports can be purchased by credit card, or else by direct bank payment.

How and when do I receive access to IDTechEx reports?

When paying successfully by credit card, reports can be accessed immediately. For new customers, when paying by bank transfer, reports will usually be released when the payment is received. Report access will be notified by email.

How do I assign additional users to the report?

Users can be assigned in the report ordering process, or at a later time by email.

Can I speak to someone about purchasing a report?

Please email research@idtechex.com stating your location and we will quickly respond.
 

Ordering Information

Materials for Bone Implants 2026-2036: Trends, Players, and Forecasts

£€$元¥₩
Electronic (1-5 users)
£7,475.00
Electronic (6-10 users)
£10,465.00
Electronic and 1 Hardcopy (1-5 users)
£8,475.00
Electronic and 1 Hardcopy (6-10 users)
£11,465.00
Electronic (1-5 users)
€8,750.00
Electronic (6-10 users)
€12,250.00
Electronic and 1 Hardcopy (1-5 users)
€9,925.00
Electronic and 1 Hardcopy (6-10 users)
€13,420.00
Electronic (1-5 users)
$9,995.00
Electronic (6-10 users)
$13,990.00
Electronic and 1 Hardcopy (1-5 users)
$11,330.00
Electronic and 1 Hardcopy (6-10 users)
$15,325.00
Electronic (1-5 users)
元67,900.00
Electronic (6-10 users)
元95,000.00
Electronic and 1 Hardcopy (1-5 users)
元76,990.00
Electronic and 1 Hardcopy (6-10 users)
元104,050.00
Electronic (1-5 users)
¥1,200,000
Electronic (6-10 users)
¥1,692,000
Electronic and 1 Hardcopy (1-5 users)
¥1,416,000
Electronic and 1 Hardcopy (6-10 users)
¥1,908,000
Electronic (1-5 users)
₩15,130,000
Electronic (6-10 users)
₩21,180,000
Electronic and 1 Hardcopy (1-5 users)
₩17,150,000
Electronic and 1 Hardcopy (6-10 users)
₩23,200,000
Click here to enquire about additional licenses.
If you are a reseller/distributor please contact us before ordering.
お問合せ、見積および請求書が必要な方はm.murakoshi@idtechex.com までご連絡ください。
Hip and knee replacement market size will approach US$34 billion by 2036.

Report Statistics

Slides 205
Forecasts to 2036
Published May 2026
 

Preview Content

pdf Document Webinar slides
pdf Document Sample pages
 

Customer Testimonial

quote graphic
"The resources produced by IDTechEx are a valuable tool... Their insights and analyses provide a strong foundation for making informed, evidence-based decisions. By using their expertise, we are better positioned to align our strategies with emerging opportunities."
Director of Market Strategy
Centre for Process Innovation (CPI)
 
 
 
ISBN: 9781835701775

Subscription Enquiry