| 1. | EXECUTIVE SUMMARY |
| 1.1. | Humanoids - a brief technology and market primer |
| 1.2. | Growing humanoid robots market opens opportunities for materials & components suppliers |
| 1.3. | Humanoid players by region: China expected to dominate early market while other regions are focusing on more selective deployments in the near term |
| 1.4. | Automotive players are leveraging existing expertise to enter the market, with growing pressure from humanoid-focused OEMs |
| 1.5. | Key subsystems and materials for humanoid robots studied in this report |
| 1.6. | Materials roadmap for humanoids and optimal entry points for materials |
| 1.7. | Materials opportunities for humanoid applications |
| 1.8. | Global distribution of players for humanoid subsystems |
| 1.9. | Partnerships are emerging across the value chain for humanoid robots |
| 1.10. | Opportunity for subsystems to leverage automotive and existing robotics |
| 1.11. | Key trends & IDTechEx outlook: Actuators for humanoids |
| 1.12. | IDTechEx analysis of typical humanoid robot specifications |
| 1.13. | Humanoid robots: Consumer vs industrial |
| 1.14. | Material choices and weight of humanoids are largely governed by humanoid application and payload requirements |
| 1.15. | Key trends & IDTechEx outlook: Structural components for humanoids |
| 1.16. | Thermal path in humanoid robotics |
| 1.17. | Key trends & IDTechEx outlook: Thermal management of humanoids |
| 1.18. | Key trends & IDTechEx outlook: Tactile sensors & IMUs |
| 1.19. | 5 Leading materials with growth opportunities & bottlenecks/pain points (1) |
| 1.20. | 5 Leading materials with growth opportunities & bottlenecks/pain points (2) |
| 1.21. | 5 Leading materials with growth opportunities & bottlenecks/pain points (3) |
| 1.22. | Other Materials to Watch |
| 1.23. | Forecasts for humanoid actuator and structural materials 2026-2036 |
| 1.24. | Material splits in a humanoid robot |
| 1.25. | Access More With an IDTechEx Subscription |
| 2. | INTRODUCTION |
| 2.1. | Humanoid players by region |
| 2.2. | From prototype demonstrations to early deployment in 2026: BYD and Tesla case study |
| 2.3. | Overview of key humanoid OEMs |
| 2.4. | Developments in humanoid trials and deployments |
| 2.5. | Maturity of commercialization of humanoid robots by application |
| 2.6. | Surge in hype around humanoid technology in 2023 |
| 2.7. | Humanoid robotics commercialization pathway |
| 2.8. | Drivers for humanoid market growth |
| 2.9. | Challenges for the humanoid market |
| 2.10. | Humanoid robot system architecture: High level overview |
| 3. | ACTUATORS |
| 3.1.1. | Overview of actuators for humanoid robotics |
| 3.1.2. | Mapping the degrees of freedom in a typical humanoid |
| 3.1.3. | Actuators - componentry level split |
| 3.1.4. | A summary of actuator types of different humanoid robotics companies |
| 3.1.5. | Actuators in Current Humanoid Robots: Heavily focused on rigid actuators |
| 3.1.6. | Case study: Boston Dynamics' Atlas |
| 3.1.7. | Actuators: Soft actuators |
| 3.1.8. | Planetary roller screws and ball screws are used for linear actuators in humanoids |
| 3.1.9. | Ball screws and planetary roller screws: Key considerations and comparisons |
| 3.1.10. | Harmonic reducers suitable for precision while planetary reducers suited to force-dominant subsystems |
| 3.1.11. | Electric driven actuators are becoming increasingly mainstream due to greater precision and faster reaction times |
| 3.1.12. | Motors types in humanoid robots: Brushed vs brushless |
| 3.1.13. | Motors types in humanoid robots: Frameless |
| 3.1.14. | Motors Types in Humanoid Robots: Coreless Motors |
| 3.1.15. | Bearings enable precise and efficient movement in their joints and actuators |
| 3.2. | Material Requirements |
| 3.2.1. | Overview of materials for humanoid actuators |
| 3.2.2. | Actuator: Material requirements |
| 3.2.3. | Material requirements for humanoid robot actuators |
| 3.2.4. | Surface coatings and treatments typically required to enhance material properties |
| 3.2.5. | Heat treatment of metal components to optimize strength and performance |
| 3.3. | Materials & Challenges |
| 3.3.1. | Materials & challenges (1) - Overview and planetary roller screws |
| 3.3.2. | Materials & challenges (2) - Ball screws |
| 3.3.3. | Materials & challenges (4) - Reducers |
| 3.3.4. | Materials & challenges (4) - Motor |
| 3.3.5. | Lubrication in actuator parts is critical to minimize wear resistance |
| 3.3.6. | Corrosion resistance of steels used in actuators components |
| 3.3.7. | Wear resistance and fatigue life of materials in actuator components |
| 3.4. | Supply Chain/ Value Chain |
| 3.4.1. | Player developments and partnerships |
| 3.4.2. | Actuator Supply Chain Overview |
| 3.4.3. | Global distribution of players for actuators and actuator components |
| 3.4.4. | Overview of rare earth magnet supply chain |
| 3.4.5. | Rare earth magnet supply chain overview: Key players |
| 3.4.6. | Rare earth supply and magnet production is consolidated in China |
| 3.4.7. | For more information on rare earth magnets |
| 3.5. | Emerging & Alternative Materials |
| 3.5.1. | Examples of Emerging & Alternative Materials |
| 3.5.2. | Magnesium alloy - trend towards lightweight humanoid robot |
| 3.5.3. | Thermoplastic polyurethane in soft actuators |
| 3.5.4. | Self-healing materials for soft robotics |
| 3.6. | Benchmarking & Analysis |
| 3.6.1. | Material comparison for actuators (1) |
| 3.6.2. | Material Comparison for Actuators (2) - Radar plots |
| 3.6.3. | NdFeB magnets offer high magnetic strength while SmCo magnets are suited for high temperature operation |
| 3.6.4. | SWOT analysis for actuator materials (1): Steel alloys |
| 3.6.5. | SWOT analysis for actuator materials (2): Aluminum and its alloys |
| 3.6.6. | SWOT analysis for actuator materials (3): Materials for soft actuators |
| 3.6.7. | IDTechEx take and outlook for materials for humanoid actuators |
| 4. | STRUCTURAL COMPONENTS |
| 4.1.1. | Overview of structural materials for humanoid robots |
| 4.1.2. | Key factors that govern structural material selection for humanoid |
| 4.1.3. | Comparison of humanoid weight, payload, and DoF |
| 4.1.4. | XPeng's IRON features metal framework, 3D polymer lattice cushioning and a fabric outer layer |
| 4.1.5. | Construction of heavy vs light humanoids |
| 4.1.6. | Case study: Figure |
| 4.2. | Materials Requirements |
| 4.2.1. | Material requirements for structural components |
| 4.3. | Materials & Challenges |
| 4.3.1. | Commonly used materials for structural components |
| 4.3.2. | Surface treatment for humanoid shell and frame materials |
| 4.3.3. | Materials & challenges (1) - Skin & shell |
| 4.3.4. | Materials & challenges (2) - Frame |
| 4.3.5. | Challenges of using magnesium alloy as structural materials - Surface treatment |
| 4.4. | Supply Chain / Value Chain |
| 4.4.1. | Key materials players for humanoid structural components |
| 4.4.2. | Global distribution of materials players for structural components |
| 4.4.3. | Examples of materials and players for humanoids and robotics |
| 4.5. | Emerging Alternative Materials |
| 4.5.1. | Ultra High Molecular Weight Polyethylene (UHMWPE) |
| 4.5.2. | Emerging materials for applications in humanoid skins and joint overlays |
| 4.6. | Benchmarking & Analysis |
| 4.6.1. | Comparison of key materials for humanoid robot frames and joints |
| 4.6.2. | Material comparison for structural components (1): Metals |
| 4.6.3. | Material comparison for structural components (2): Plastics |
| 4.6.4. | Material comparison for structural components (3): Radar plots |
| 4.6.5. | Material performance comparison of PEEK, aluminum and magnesium alloy |
| 4.6.6. | Magnesium versus aluminum alloy |
| 4.6.7. | SWOT analysis for structural component materials (1) |
| 4.6.8. | SWOT analysis for structural component materials (2) |
| 4.6.9. | SWOT analysis for structural component materials (3) |
| 4.6.10. | IDTechEx take and outlook for materials for structural components |
| 5. | THERMAL MANAGEMENT |
| 5.1.1. | Thermal management architecture in humanoid robots |
| 5.1.2. | Heatmap of humanoid robotics |
| 5.1.3. | Summary of cooling use cases (1/2) |
| 5.1.4. | Summary of cooling use cases (2/2) |
| 5.1.5. | Liquid cooling in humanoid robots |
| 5.2. | Materials Requirements |
| 5.2.1. | Thermal path in humanoid robotics |
| 5.2.2. | Materials requirements (1) |
| 5.2.3. | Materials requirements (2) |
| 5.2.4. | Actuators adopt hybrid thermal management to mitigate aging and performance loss caused by temperature excursions |
| 5.2.5. | Multiple passive thermal approaches are used in battery packs to improve temperature uniformity |
| 5.2.6. | Compute modules rely on active cooling to prevent thermal throttling under sustained high TDP loads |
| 5.2.7. | Power electronics rely on packaging-level thermal design to manage dense, distributed heat sources |
| 5.3. | Materials & Challenges |
| 5.3.1. | From major heat sources to thermal management approaches |
| 5.3.2. | Passive cooling - TIM, heat spreader, heat pipe and vapor chambers (1) |
| 5.3.3. | Passive cooling - TIM, heat spreader, heat pipe and vapor chambers (2) |
| 5.3.4. | Thermal buffering - Phase Change Materials |
| 5.3.5. | Active Cooling - Forced Air Cooling |
| 5.3.6. | Active Cooling - Liquid Cooling |
| 5.4. | Emerging & Alternative Materials |
| 5.4.1. | Summary of Advanced TIMs |
| 5.4.2. | Evaporative Cooling via Porous Structural Materials (Sweating) |
| 5.5. | Supply Chain/ Value Chain |
| 5.5.1. | Prioritized Thermal Materials for In-Depth Research |
| 5.5.2. | Thermal Materials Supply Chain Overview |
| 5.6. | Benchmarking & Analysis |
| 5.6.1. | Thermal Conductivity by TIM Format |
| 5.6.2. | Properties Comparison of TIMs and PCMs - Radar plots |
| 5.6.3. | Properties Comparison of TIMs and PCMs |
| 5.6.4. | Benchmarking Key TIMs Types |
| 5.6.5. | Material Landscape of Thermal Interface Systems (1) |
| 5.6.6. | Material Landscape of Thermal Interface Systems (2) |
| 5.6.7. | SWOT Analysis of Key Thermal Management Material Systems: Thermal Interface Materials |
| 5.6.8. | Heat Spreader Benchmark - Solid Heat Spreader |
| 5.6.9. | SWOT Analysis of Key Thermal Management Material Systems: Solid Heat Spreader |
| 5.6.10. | Heat Spreader Benchmark - Phase-Change Heat Spreader |
| 5.6.11. | SWOT Analysis of Key Thermal Management Material Systems: Phase-Change Heat Spreader |
| 5.6.12. | Liquid Cooling Benchmark - Cold plate and Flexible microfluidic cooling |
| 5.6.13. | SWOT Analysis of Key Thermal Management Material Systems: Liquid Cooling |
| 5.6.14. | IDTechEx Outlook for Thermal Materials for Humanoid Robotics |
| 5.6.15. | High Potential Materials: Graphite Heat Spreader |
| 5.6.16. | High Potential Materials: Phase Change Materials (PCMs) |
| 6. | TACTILE SENSORS |
| 6.1. | Market Overview of Tactile Sensors in Humanoids |
| 6.1.1. | Overview of tactile sensors for humanoids |
| 6.1.2. | Tactile sensing in humanoid - 2026 state of the market |
| 6.1.3. | Tactile sensing seeing greater market penetration in the US than China? |
| 6.1.4. | Tactile Sensing Integration Considerations |
| 6.1.5. | Tactile sensing for humanoids - market map segmented by sensor technology type |
| 6.1.6. | Which key humanoid OEMs are integrating tactile sensors? |
| 6.1.7. | Multiple humanoid OEMs won't disclose the exact technology underpinning their tactile sensing functionality or be specific about use-cases |
| 6.1.8. | Dexterous hands with tactile sensing |
| 6.2. | Tactile Sensing Technologies Breakdown |
| 6.2.1. | Introduction to tactile sensing technology opportunities |
| 6.2.2. | Tactile Sensing: MEMS and Semiconductor |
| 6.2.3. | MEMS based tactile sensing players: Overview and materials insights (1) |
| 6.2.4. | MEMS based tactile sensing players: Overview and materials insights (2) |
| 6.2.5. | Tactile Sensing with MEMS - OEM Case Study: Sanctuary.AI's Phoenix General Purpose Robots |
| 6.2.6. | Intouch robotics - semiconductor sensor modules for e-skins |
| 6.2.7. | Tactile Sensing: Capacitive sensors |
| 6.2.8. | Capacitive sensing precursor |
| 6.2.9. | Tesla suspected to be utilizing capacitive sensors |
| 6.2.10. | E-Skins for Humanoids: Neura Robotics |
| 6.2.11. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: Robotiq (1) |
| 6.2.12. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: Robotiq (2) |
| 6.2.13. | Aidin Robotics and Samsung Electronics |
| 6.2.14. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: PPS |
| 6.2.15. | Tactile Sensing with Capacitive Sensors - Supplier Case Study: DIC Corp. |
| 6.2.16. | Tactile Sensing: Printed and/or Flexible Sensors |
| 6.2.17. | Introduction to the printed and flexible sensor market (1) |
| 6.2.18. | Printed and flexible can be synonymous but there are distinctions |
| 6.2.19. | Multifunctional hybrid sensors are greater than the sum of their parts |
| 6.2.20. | Market map of applications and players: Printed piezoresistive sensors |
| 6.2.21. | Tactile Sensing with Printed Sensors - OEM Case Study: Unitree uses Nexdor and Hanwei's tactile sensors |
| 6.2.22. | E-Skins for Humanoids: Hanson Robotics and Microfluidics |
| 6.2.23. | E-Skins for Humanoids: Kawasaki Robotics 'T-Skin' |
| 6.2.24. | B-Neo: Aiming for full-body tactile intelligence (1) |
| 6.2.25. | B-Neo: Aiming for full-body tactile intelligence (2) |
| 6.2.26. | SWOT Analysis: Printed and Flexible sensors for humanoid tactility |
| 6.2.27. | Printed sensors: Typical material and substrate requirements |
| 6.2.28. | Tactile Sensing: Optical and Vision |
| 6.2.29. | Tactile Sensing with Vision based Sensors - Supplier Case Study: Gelsight - Digit |
| 6.2.30. | Gelsight Approach: Monocular vision-based tactile sensing |
| 6.2.31. | Daimon Robotics - vision-based tactile sensing using dense colour patterns |
| 6.2.32. | Tactile Sensing with Optical Sensors - Supplier Case Study: Contactile |
| 6.2.33. | Tactile Sensing: Magnetic Sensors |
| 6.2.34. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Xela Robotics |
| 6.2.35. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Paxini (1) |
| 6.2.36. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Paxini (2) |
| 6.2.37. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Paxini (3) |
| 6.2.38. | Tactile Sensing with Magnetic Sensors - Supplier Case Study: Shadow Robot |
| 6.3. | Tactile Sensing in Humanoids: Benchmarking and Conclusions |
| 6.3.1. | Benchmarking tactile sensors by technology |
| 6.3.2. | Near-term opportunities in hands, higher volume opportunities in e-skins |
| 6.3.3. | Conclusions |
| 7. | INERTIAL MEASUREMENT UNITS (IMUS) |
| 7.1. | Overview of Inertial Measurement Units (IMUs) |
| 7.1.1. | What are MEMS? |
| 7.1.2. | Overview of Inertial Measurement Units (IMUs) |
| 7.1.3. | Application Grades of IMUs |
| 7.1.4. | IMU Key Applications |
| 7.2. | IMU: Material Requirements and Supply Chain |
| 7.2.1. | MEMS IMUs - Key Player Introduction |
| 7.2.2. | IMU Market Landscape - Key Players |
| 7.2.3. | Materials for MEMS IMUs: High level overview |
| 7.2.4. | MEMS Novel Accelerometers - Commercial Innovators |
| 7.2.5. | IMU (Inertial Measurement Unit) - material considerations and conclusions |
| 8. | BATTERIES |
| 8.1. | Comparison of Humanoid Batteries and Operating Time |
| 8.2. | Limited Battery Endurance: Fast Charging or Battery Swapping |
| 8.3. | Swappable battery that runs for four hours continuously |
| 8.4. | Figure AI's inhouse battery development for humanoids |
| 8.5. | Battery challenges for humanoids |
| 8.6. | Shift towards solid-state batteries? |
| 8.7. | Examples of mass production plans from key SSB players |
| 8.8. | Humanoids can leverage developments in EV: Automakers' timeline for installing SSBs in vehicles |
| 8.9. | More information on solid state batteries |
| 8.10. | Outlook for batteries in humanoids: Addressing pain points |
| 9. | FORECASTS |
| 9.1. | Forecast methodology and assumptions |
| 9.2. | Weight distribution of humanoid robots for industrial applications |
| 9.3. | Volume forecasts for humanoid robots 2026-2036 |
| 9.4. | Forecasts for humanoid robot actuators 2026-2036 |
| 9.5. | Forecasts for rare-earth permanent magnets for humanoid robots 2026-2036 |
| 9.6. | Forecasts for humanoid actuator and structural materials 2026-2036 |
| 9.7. | Material splits in a humanoid robot |
| 10. | COMPANY PROFILES |
| 10.1. | 1X Technologies |
| 10.2. | AgiBot |
| 10.3. | Agility Robotics |
| 10.4. | Apptronik, Inc |
| 10.5. | Bayflex Solutions |
| 10.6. | Beijing Humanoid Robotics Innovation Center |
| 10.7. | Booster Robotics |
| 10.8. | Epoch Robotics |
| 10.9. | Figure AI |
| 10.10. | Fourier Robotics |
| 10.11. | Fourier Robotics |
| 10.12. | IntBot |
| 10.13. | Keenon Robotics |
| 10.14. | Keenon Robotics |
| 10.15. | Magic Atom |
| 10.16. | Pal Robotics |
| 10.17. | Pasinic Perception Technology |
| 10.18. | ProLogium |
| 10.19. | Realbotix |
| 10.20. | Sanctuary AI |
| 10.21. | SenseGlove |
| 10.22. | Sharpa Robotics |
| 10.23. | TQ Group |
| 10.24. | Unitree Robotics |
| 10.25. | Unitree Robotics: Humanoid Robotics |
| 10.26. | XPeng Motors - IRON Humanoid Robotics |
| 10.27. | Zhongqing |