TyroMotion GmbH (AT)

Visometry

Visometry develop and offer object tracking and image identification software, primarily for industrial quality control applications. IDTechEx caught up with the company at the Laval Virtual 2022 Conference.

How Has the Biosensor Market Doubled in Just Two Years?

Never before has point-of-care testing been so crucial to healthcare systems. In the last 2 years, COVID-19 has caused the point-of-care biosensors industry to expand by almost 300%. A recent IDTechEx report explains the drivers causing the shift from conventional laboratory-based diagnostics toward point-of-care diagnostics performed directly at hospitals, clinics, offices, and at home.

Bacterial Soundtracks Revealed by Graphene Membrane

Have you ever wondered if bacteria make distinctive sounds? If we could listen to bacteria, we would be able to know whether they are alive or not. When bacteria are killed using an antibiotic, those sounds would stop - unless of course the bacteria are resistant to the antibiotic. This is exactly what a team of researchers have managed to do: they captured low-level noise of a single bacterium using graphene.

Charging Underwater, Body-Implanted Electronics With Ultrasonic Waves

As the population ages and with the advancements in medical technology, the number of patients using implanted electronic devices, such as artificial pacemakers and defibrillators, is increasing worldwide. Currently, the batteries of body-implanted devices are replaced by an incision surgery, which may lead to health complications. Accordingly, a new charging technique by wireless energy transfer is emerging that can also be used to charge the batteries of underwater devices, such as sensors, that are used for monitoring the conditions of submarine cables.

Want to 3D Print a Kidney? Start by Thinking Small

Human organ transplants offer a crucial lifeline to people with serious illnesses, but there are too few organs to go around: in the U.S. alone, there are more than 112,000 people currently waiting for transplants. The promise of 3D printing organs is one possible solution to address this shortage but has been fraught with complexity and technical barriers, limiting the type of organs that can be printed.

SCAME and Monta Join Forces to Revolutionise EV Charging Across The UK

Charge point manufacturer, SCAME, and EV charging software platform, Monta, have partnered up to increase the amount of public charge points in the UK as well as simplify the installation, management, and use of chargers.

Siemens Accelerates Industrialization of Additive Manufacturing

Siemens is announcing the opening of its new Charlotte Advanced Technology Collaboration Hub (CATCH) which will be located in Charlotte, NC. This new strategic research and development hub, spearheaded by Siemens Digital Industries, Siemens Technology and Siemens Energy, now a separately operated company, to focus on helping our customers accelerate their plans for the industrialization of additive manufacturing.

Statevolt to develop 54GWh Gigafactory in California

Statevolt will construct a 54GWh Gigafactory in Imperial Valley, southern California with an expected CapEx of $4 billion. To launch the new facility, Statevolt has also signed a Letter of Intent with Controlled Thermal Resources.

4Dviews

4Dviews is an early-stage company that designs and sells physical studios for generating 3D video footage, enabling the typical avatar in virtual 3D space to be replaced with an accurate 3D image. IDTechEx caught up with 4D views at the Laval Virtual conference in 2022.

A Wearable for Monitoring Prenatal Health at Home

An estimated 15 million babies are born prematurely every year, posing a significant risk to both maternal and neonatal health. The EU funded WISH project promotes a novel tool for monitoring the risk of preterm labour at home.

Kyrgyzstan Targeting Carbon Neutrality by 2050

Kyrgyzstan is targeting reducing greenhouse gas emissions by as much as 44 percent by 2030, and achieving carbon neutrality by 2050. While the country already generates around 90 percent of its electricity from clean energy resources, this is almost exclusively from aging hydropower plants. By tapping the country's high irradiation levels, Kyrgyzstan could enhance energy security while also managing its water resource levels, which are being diminished by climate change.

Mercedes-Benz VISION EQXX Covers Over 1000 km on One Battery Charge

The VISION EQXX from Mercedes-Benz has now taken to the roads of Europe and has demonstrated its range and efficiency. Travelling from Sindelfingen across the Swiss Alps and Northern Italy, to its destination of Cassis on the Côte d'Azur, it covered more than 1,000 km in everyday traffic, on a single battery charge.

How to Print a Robot From Scratch: New 3D Printing Approach

Imagine a future in which you could 3D-print an entire robot or stretchy, electronic medical device with the press of a button—no tedious hours spent assembling parts by hand.

Avatar Medical

Avatar Medical has developed software to create 3D virtual images that can be explored using VR from conventional medical images. IDTechEx first met this early-stage company at the Laval Virtual AR/VR conference in 2022.

Holographic Doctor Visits the Space Station

Holoportation is a type of capture technology that allows high-quality 3D models of people to be reconstructed, compressed and transmitted live anywhere in real time.. When combined with mixed reality displays such as HoloLens, it allows users to see, hear, and interact with remote participants in 3D as if they are actually present in the same physical space.

Smart-Ship: Maritime Haptic Levers

IDTechEx had an interview with Brent Kok, Co-founder and CFO of Smart-Ship. Smart-Ship, based in Delft, the Netherlands, is a start-up founded in September 2018, currently focused on implementing haptic feedback in maritime control.

Efficient Power Conversion: GaN FETs

EPC is a provider of power semiconductors using gallium nitride (GaN) technology. The key areas discussed with IDTechEx were the benefits of their GaN FETs (field-effect transistors) over the typical silicon MOSFETs (metal-oxide-semiconductor field-effect transistors) for applications such as LiDAR and for low voltage electric motors.

Wandercraft Atalante X: New Generation of Self-Balancing Exoskeleton

Wandercraft unveils Atalante X: an autonomous exo that accompanies the patient at all stages of rehabilitation, with a physiologic walking pattern. Atalante X is hands-free, without crutches, easy to use and intuitive. It adapts progressively to the needs of patients, from their very first steps to the most playful sessions.

GM and Glencore Enter Multi-Year Cobalt Supply Agreement

Glencore and General Motors Co.announced a multi-year sourcing agreement in which Glencore will supply GM with cobalt from its Murrin Murrin operation in Australia. Cobalt is an important metal in the production of EV batteries, and the cobalt processed from Australia will be used in GM's Ultium battery cathodes, which will power electric vehicles such as the Chevrolet Silverado EV, GMC HUMMER EV and Cadillac LYRIQ.

Joystick-Operated Robot Could Help Surgeons Treat Stroke Remotely

Engineers have developed a telerobotic system to help surgeons quickly and remotely treat patients experiencing a stroke or aneurysm. With a modified joystick, surgeons in one hospital may control a robotic arm at another location to safely operate on a patient during a critical window of time that could save the patient's life and preserve their brain function.