TyroMotion GmbH (AT)

Tenova

Tenova is an Italian conglomerate that has developed direct lithium extraction (DLE) processes using solvent extraction technology. This profile will cover its technology and recent market and project developments.

SLB

SLB is an oil & gas multinational developing membrane-based technologies for direct lithium extraction (DLE).

Material Challenges for Superconducting Quantum Chips

In this article, IDTechEx Technology Analyst Noah El Alami explores the material and fabrication challenges in scaling up quantum computers and sensors based on superconducting chips.

Sublime Systems

Sublime Systems is a green cement start-up focused on electrochemical conversion of calcium silicate rocks into a cementitious material. IDTechEx interviewed Alexis Olans Haass, Managing Director of European Market Development at Sublime Systems.

Ucaneo

Ucaneo is a German start-up focused on electrodialysis direct air capture.

Electronic Adhesives Meet Thermoforming for In-Mold Electronics

In-mold electronics (IME) is a manufacturing technology that prioritizes functionality and the seamless integration of electrical components into 3D structures. This article covers the use of IME for a sophisticated and lightweight aesthetic and some of the market forecasts over the next ten years.

Flow Battery Technologies Beyond Vanadium

The vanadium redox flow battery (VRFB) technology is the most commercially deployed flow battery chemistry. However, high electrolyte costs have inhibited the wider market penetration of the technology, especially since Li-ion battery energy storage system (BESS) costs continue to fall. Vanadium electrolyte leasing models may help to reduce upfront cost to some degree, though the commercialization of cheaper, alternative flow battery chemistries will also drive global flow battery market growth. This article examines the current state of VRFBs and the evolving commercialization of alternative redox flow battery (RFB) technologies.

SAF (Sustainable Aviation Fuel) Market to Reach US$50 billion in 2036

Decarbonization of the aviation and maritime sectors will require large amounts of low-carbon fuels to reach global net-zero targets. IDTechEx forecasts that the global sustainable aviation fuel market may reach US$50 billion in 2036.

Beam Global (AllCell)

Beam Global is a provider of infrastructure solutions for electrification of transport and energy security. IDTechEx spoke to BeamGlobal to learn about its developments in AllCell phase change materials for thermal management and fire protection in EV applications.

Could New Nuclear Feed Power-Hungry Data Centers?

In this article, IDTechEx Technology Analyst Noah El Alami discusses the potential of the new generation of nuclear technologies - fission small modular reactors (SMRs) and fusion energy - in powering the ever-increasing capacity of AI data centers.

Sakuu

Sakuu is an American developer of additive manufacturing processes and equipment for Li-ion and beyond Li-ion batteries. IDTechEx spoke to Sakuu about its technological innovations and market approach.

CFP Composites

CFP Composites is a UK-based manufacturer and developer of ultra-high temperature carbon fibre composites. IDTechEx spoke to CFP to learn more about its materials and one of its key target applications, the electric vehicle (EV) battery space.

Pyrophobic Systems

Pyrophobic Systems is a supplier of intumescent thermoplastic material for passive fire protection. IDTechEx spoke to Pyrophobic about its LithiumPrevent material, a passive thermal runaway containment and propagation prevention material based on proprietary intumescent technology.

XL Batteries

XL Batteries is an American developer of organic redox flow battery technology. IDTechEx spoke to XL Batteries about its technology and recent projects, which are the focus of this profile.

Reshaping the Lithium Market Through Direct Lithium Extraction

The growth of Li-ion batteries creates surging demand for lithium, but there is an increasing need for extraction methods that are efficient, sustainable, and versatile across different environments and regions. This article highlights how the emergence of direct lithium extraction (DLE) technologies will allow producers to satisfy these needs while scaling up to meet global lithium demand in the coming decade.

Commercial & Industrial Battery Storage Market to Reach US$21B in 2036

Global battery energy storage system (BESS) deployments continue to be deployed at a rapid pace, with surging deployments seen especially in grid-scale markets. Giant Li-ion BESS players dominate this market leaving untapped opportunities for smaller players to exploit in commercial and industrial (C&I) sectors, behind-the-meter (BTM). However, operating in this underappreciated market can be complex, given the vast end-use applications and changing regional drivers. This article highlights the emerging demand for C&I BESS technologies.

MADDE

3D printing manufacturing service company that print Silicon Carbide (SiC) and metal materials. The company was spun off from Hyundai Motor Company in 2023.

The Need for Speed: EV Motors Breaking the 30,000rpm Barrier

2025 has seen a slew of announcements for high speed electric vehicle (EV) motors, with several exceeding 30,000rpm! What is behind this sudden need for speed? In this article, IDTechEx discusses the benefits, challenges, and solutions for taking this approach. With IDTechEx's latest report on Electric Motors for Electric Vehicles 2026-2036 predicting that over 140 million EV motors will be required in the year 2036, shifting technology trends could see new opportunities for motor manufacturers and their suppliers.

How Magnets and Batteries are Key to Critical Material Recovery Growth

IDTechEx forecasts that the critical material recovery market value will exceed US$66 billion per year by 2046, as demand, waste volume, and regulatory pressures all grow. Lithium-ion batteries and rare earth magnets are set to become key secondary sources of critical materials, as commercially mature recycling technology capacity scales in anticipation of growing waste volume becoming available in the 2030's.

How Solid-State Batteries Will Reshape Materials and Manufacturing

Solid-state batteries (SSBs) are maturing into early deployment, and with that maturity comes a practical question: what happens at end of life? Recycling is an important starting point for thinking about sustainability and materials security in SSBs, but it is only a small piece of a much larger transition. This article outlines why recycling matters, where it sits in the bigger picture, and how the IDTechEx report "Solid State Batteries 2026-2036: Technology, Forecasts, Players" can guide decisions beyond circularity alone.